The 2015 Ford F-150 is a strong and succesful pickup truck. When you’re planning on towing a trailer, you may want to put in a brake controller to make sure that your trailer’s brakes are working correctly. Putting in a brake controller will not be a tough process, however it does require some fundamental electrical information. On this article, we’ll stroll you thru the steps on how you can add a brake controller to your 2015 F-150.
Earlier than you start, you may want to assemble a couple of instruments and supplies. You will want a brake controller, a wiring harness, a drill, and a screwdriver. You will additionally must seek the advice of your truck’s proprietor’s handbook to find the correct wiring diagram. Upon getting every thing you want, you are prepared to start the set up course of.
Step one is to find the brake controller mounting bracket. The bracket is often positioned beneath the dashboard, on the driving force’s facet. As soon as you have discovered the bracket, you may must drill a couple of holes to mount the brake controller. As soon as the brake controller is mounted, you may want to attach the wiring harness. The wiring harness will join the brake controller to the truck’s electrical system. As soon as the wiring harness is related, you may want to check the brake controller to make it possible for it is working correctly. To do that, merely apply the brakes in your truck and make it possible for the trailer’s brakes are additionally engaged.
Mounting the Brake Controller
To mount the brake controller, you will want the next instruments:
Phillips head screwdriver
Flat-blade screwdriver
Drill
1/4-inch drill bit
1/2-inch drill bit
7/16-inch wrench
Wire strippers
Electrical tape
Drilling the Gap for the Brake Controller
1. Use the 1/4-inch drill bit to drill a pilot gap within the desired location for the brake controller.
2. Use the 1/2-inch drill bit to widen the opening to 1/2 inch.
3. Insert the brake controller into the opening and tighten the mounting screws.
Wiring the Brake Controller
1. Join the crimson wire from the brake controller to the constructive terminal on the battery.
2. Join the black wire from the brake controller to the destructive terminal on the battery.
3. Join the blue wire from the brake controller to the brake change on the brake pedal.
4. Join the white wire from the brake controller to the bottom terminal on the chassis.
Testing the Brake Controller
1. Begin the engine and apply the brakes.
2. The brake controller ought to activate and the brake lights ought to come on.
3. If the brake controller doesn’t activate, verify the wiring connections and make it possible for the brake change is correctly adjusted.
Connecting the Trailer Brake Wires
Now that you’ve got a suitable brake controller and the required instruments, listed here are the detailed steps to attach the trailer brake wires:
Step 1: Collect Your Supplies
Earlier than beginning, guarantee you may have all the required supplies, together with the brake controller, wiring harness, electrical tape, wire strippers, and crimp connectors.
Step 2: Find the Wiring Harness
Determine the brake controller wiring harness in your truck. It’s usually positioned behind the dashboard or beneath the steering column.
Step 3: Join the Energy Wires
Join the black wire from the controller to a floor level on the truck’s body utilizing a crimp connector. Join the yellow wire to a continuing 12-volt energy supply, such because the battery or ignition change.
Step 4: Join the Brake Output Wires
Determine the blue and crimson wires from the controller. Crimp the blue wire to the brake mild change wire, usually a inexperienced wire, utilizing a butt connector. Crimp the crimson wire to the stoplight wire.
Step 5: Join the Trailer Wires
Find the trailer’s wiring harness and join the controller’s black wire to the white wire on the trailer. Join the controller’s yellow wire to the brown wire on the trailer.
Step 6: Join the Brake Sign Wire
Join the blue wire from the controller to the blue wire on the trailer’s brake circuit. This wire sends the brake sign to the trailer’s brakes.
Step 7: Double-Test and Insulate
Completely verify all connections to make sure they’re safe and insulated. Wrap electrical tape round all uncovered wire ends and any connections made with crimp connectors. This prevents brief circuits and ensures a dependable connection.
Step 8: Check the System
Join the trailer to the truck and check the brake controller. Press the brake pedal and observe if the trailer’s brakes are activated. Regulate the controller’s settings as wanted for optimum braking efficiency.
| Wire Shade (Truck) | Operate | Connection |
|---|---|---|
| Black | Floor | Truck body |
| Yellow | Energy | Battery or ignition change |
| Blue | Brake Sign | Brake mild change |
| Pink | Stoplight | Stoplight wire |
| Wire Shade (Trailer) | Operate | Connection |
|---|---|---|
| White | Floor | Controller black wire |
| Brown | Energy | Controller yellow wire |
| Blue | Brake Sign | Controller blue wire |
Putting in the Brake Mild Change
The brake mild change is accountable for activating the brake lights when the brake pedal is depressed. To put in the brake mild change, comply with these steps:
1. Find the brake mild change on the brake pedal meeting. It’s often positioned close to the highest of the pedal.
2. Disconnect {the electrical} connector from the brake mild change.
3. Use a wrench to take away the brake mild change from the brake pedal meeting.
4. Apply a small quantity of grease to the threads of the brand new brake mild change.
5. Set up the brand new brake mild change into the brake pedal meeting.
6. Tighten the brake mild change utilizing a wrench.
7. Join {the electrical} connector to the brake mild change.
8. Depress the brake pedal to check the brake mild change. The brake lights ought to illuminate when the brake pedal is depressed.
Checking the Brake Mild Change
If you’re having issues along with your brake lights, you’ll be able to verify the brake mild change to see whether it is defective. To verify the brake mild change, comply with these steps:
1. Disconnect {the electrical} connector from the brake mild change.
2. Use a multimeter to verify for continuity between the 2 terminals of the brake mild change.
3. If there isn’t a continuity, the brake mild change is defective and must be changed.
Sustaining the Brake Controller
To make sure your brake controller features correctly and safely, common upkeep is important. Listed here are some key steps to comply with:
- Examine the Brake Controller: Often examine the brake controller for any indicators of harm, similar to unfastened connections or frayed wires.
- Clear the Brake Controller: Use a delicate material and gentle detergent to softly clear the brake controller to take away dust and mud.
- Test the Brake Pedal Sensitivity: The brake pedal sensitivity needs to be adjusted to fit your driving type and cargo weight. Confer with the brake controller handbook for steerage.
- Check the Brake Controller: Conduct a check drive with the trailer hooked up to confirm that the brake controller is working accurately.
- Confirm Trailer Brake Operation: Examine the trailer brakes to make sure they’re correctly activated when making use of the brake pedal.
- Lubricate the Brake Controller: If specified by the producer, lubricate the brake controller as per the supplied directions.
- Replace the Brake Controller Firmware: If firmware updates can be found, set up them to boost the brake controller’s performance and handle any potential points.
- Examine Wiring and Connections: Completely look at the wiring and connections for any harm, corrosion, or unfastened terminals, particularly these uncovered to the weather.
- Use High quality Parts: Make sure that all elements used with the brake controller, similar to trailer wiring and connectors, are high-quality and suitable along with your automobile and trailer.
- Confer with the Consumer Handbook: At all times seek the advice of the brake controller consumer handbook for particular upkeep directions and troubleshooting ideas.
| Further Upkeep Suggestions |
|---|
| – Test the brake fluid degree frequently and high it off if vital. |
| – Have your entire brake system inspected and serviced by a certified mechanic as really helpful by the automobile producer. |
| – Retailer the brake controller in a dry and guarded location when not in use. |
2015 F150 How To Add Brake Controller
When you’re towing a trailer along with your 2015 F150, you may want to put in a brake controller. This can will let you manually management the trailer’s brakes, which is essential for security and stopping accidents.
This is a step-by-step information on how you can set up a brake controller in your 2015 F150:
- Collect your supplies. You will want a brake controller, wiring harness, and mounting bracket.
- Disconnect the destructive battery terminal.
- Find the brake pedal meeting. The brake controller might be mounted beneath the sprint, to the left of the brake pedal.
- Set up the mounting bracket. The bracket might be hooked up to the brake pedal meeting utilizing the supplied bolts.
- Join the wiring harness to the brake controller. The wiring harness might be plugged into the brake controller and the brake pedal meeting.
- Join the destructive battery terminal.
- Check the brake controller. Apply the brakes and make it possible for the trailer’s brakes are additionally partaking.
Folks Additionally Ask About 2015 F150 How To Add Brake Controller
Can I set up a brake controller myself?
Sure, you’ll be able to set up a brake controller your self if in case you have some fundamental automotive information and instruments.
The place is the very best place to mount a brake controller?
One of the best place to mount a brake controller is beneath the sprint, to the left of the brake pedal. This gives you quick access to the controller whereas driving.
What sort of brake controller do I want for my 2015 F150?
You have to a brake controller that’s suitable along with your 2015 F150’s towing capability. Seek the advice of your proprietor’s handbook or a certified technician to find out the proper brake controller to your automobile.
