5 Easy Steps to Reset Your LG Dryer

by

Reset LG Dryer
$title$

There are few things more frustrating than when your dryer suddenly stops working. If you’re experiencing this issue with your LG dryer, don’t worry – there are a few simple steps you can take to try to reset it.

First, try unplugging the dryer from the wall outlet and waiting a few minutes. This will help to reset the dryer’s electrical system. Once you’ve plugged the dryer back in, check to see if it’s working properly. If it’s still not working, you can try resetting the dryer’s control panel. To do this, press and hold the “Power” button for about 5 seconds. This should reset the control panel and hopefully get your dryer working again.

If you’ve tried both of these steps and your dryer is still not working, you may need to call a qualified appliance repair technician. They will be able to diagnose the problem and make the necessary repairs. However, in many cases, you can fix the problem yourself by simply resetting the dryer. So, before you call a repair technician, give these steps a try.

Initial Diagnosis and Troubleshooting

Before resetting your LG dryer, it’s crucial to perform an initial diagnosis to determine the underlying issue. Here are some common symptoms and potential causes:

Excessive Noise:

Symptom Potential Cause
Loud banging Loose drum support rollers
Screeching or squealing Worn or damaged belt
Rattling or humming Loose or misaligned components

Not Heating Properly:

Symptom Potential Cause
Clothes feel cold or damp Faulty heating element
Insufficient airflow Clogged vent or lint screen
Damaged temperature sensor False temperature readings

Not Drying Efficiently:

Symptom Potential Cause
Clothes take longer to dry Overloaded dryer
Poor airflow Dirty or clogged condenser coils
Faulty moisture sensor Unable to detect moisture levels

Unplugging and Reconnecting the Dryer

To reset your LG dryer through this method, follow these steps:

  1. Unplug the dryer from the power outlet.
  2. Wait for 1-2 minutes, allowing the dryer to fully discharge any residual electricity.

    3. Holding the Power Button

    For select LG dryer models, you may be required to hold down the power button while the dryer is unplugged. Keep holding the power button for approximately 10 seconds to drain any remaining power and reset the dryer.

  3. Reconnect the dryer to the power outlet.
  4. Turn on the dryer to check if the reset process was successful.

Resetting the Circuit Breaker or Fuse

In case of a power surge or short circuit, the circuit breaker or fuse associated with the dryer may trip. You can follow these steps to reset it:

  1. Locate the circuit breaker panel or fuse box: The location of the circuit breaker panel or fuse box varies depending on your home’s electrical system. It’s typically found in a basement, utility room, or garage.
  2. Identify the circuit breaker or fuse for the dryer: Look for a circuit breaker that is labeled “Dryer” or a fuse that is connected to the dryer’s outlet.
  3. Reset the circuit breaker or fuse: If the circuit breaker has tripped, it will be in the “off” position. Flip it back to the “on” position. If a fuse has blown, replace it with a new one of the same amperage rating.

Once you’ve reset the circuit breaker or fuse, try starting the dryer again. If it still doesn’t work, there may be another issue that needs to be addressed.

Resetting the Internal Thermostat

The internal thermostat in your LG dryer plays a crucial role in regulating the drying temperature and ensuring your clothes come out dry without being damaged. If you encounter issues with your dryer’s performance, resetting the internal thermostat may resolve common problems.

To reset the internal thermostat, follow these steps:

  1. Unplug the dryer from the power outlet.
  2. Locate the thermal fuse (a small, round device typically located near the blower housing).
  3. Using a multimeter, test the continuity of the thermal fuse. If it’s open, replace it with a new one.
  4. Check the wiring connections to the thermostat and ensure they are secure. In some LG dryer models, the thermostat is located behind the control panel. To access it, follow these additional steps:
    5. Steps Details
    Unplug the dryer and remove the screws securing the back panel. The back panel is typically held in place by two or four screws.
    Locate the thermostat, which is usually a round or square device with two or three terminals. The thermostat may be attached to a metal bracket or mounted directly on the dryer’s frame.
    Disconnect the wires from the thermostat and clean the terminals using a fine-grit sandpaper or an electronics cleaner. Be careful not to damage the wires or the thermostat.
    Reconnect the wires to the thermostat and tighten the terminals securely. Use a screwdriver to ensure the terminals are tight but do not overtighten.
    Reattach the back panel and plug the dryer back into the power outlet. Test the dryer’s operation to verify if resetting the thermostat resolved the issue.
  5. Plug the dryer back into the power outlet and run a test cycle to check if the issue has been resolved.

Clearing the Lint Filter and Vent Hose

Cleaning the lint filter and vent hose is an important part of maintaining your LG dryer’s performance and preventing fires. Lint can accumulate in these areas and restrict airflow, which can lead to longer drying times, higher energy consumption, and even dryer fires. Here are the steps on how to clean the lint filter and vent hose:

Step 1: Unplug the dryer

Before you begin any maintenance, always unplug the dryer from the power outlet for safety.

Step 2: Remove the lint filter

Locate the lint filter on the front of the dryer and pull it straight out. Use a lint brush or cloth to remove any lint from the filter. Rinse the filter under warm water if needed, and let it air dry completely before reinserting it.

Step 3: Clean the lint filter housing

Once the lint filter is removed, use a vacuum cleaner to remove any lint from the lint filter housing. You can also use a damp cloth to wipe down the housing.

Step 4: Clean the vent hose

The vent hose is the flexible tube that connects the dryer to the outside vent. Disconnect the vent hose from both the dryer and the vent, and use a vacuum cleaner to remove any lint or debris from the hose. If the hose is particularly dirty, you can use a long brush or a wet/dry vacuum to clean it thoroughly.

Step 5: Inspect the vent hose and replace if necessary

Once the vent hose is clean, inspect it for any damage or tears. If the hose is damaged, it should be replaced with a new one. It is recommended to replace the vent hose every 3-5 years, even if it does not appear to be damaged.

Signs of a damaged vent hose:
  • Rips or tears in the hose
    		•
  • Kinks or bends in the hose
    		•
  • Collapsed or crushed hose
    		•

    Checking and Replacing the Thermal Fuse

    The thermal fuse is a safety device that cuts off power to the dryer if it overheats. If the thermal fuse blows, you will need to replace it before the dryer will work again. To check the thermal fuse, follow these steps:

    1. Unplug the dryer from the power outlet.

    2. Remove the back panel of the dryer.

    3. Locate the thermal fuse. It is usually located near the heating element.

    4. Check the thermal fuse for continuity using a multimeter. If the fuse is blown, there will be no continuity.

    5. If the fuse is blown, you will need to replace it. To do this, simply remove the old fuse from the holder and snap the new fuse into place.

    6. Once you have replaced the thermal fuse, reassemble the dryer and plug it back into the power outlet. The dryer should now work normally.

    | Symptom | Cause | Solution |
    |—|—|—|
    | Dryer not heating | Blown thermal fuse | Replace the thermal fuse |
    | Dryer overheating | Clogged lint filter | Clean the lint filter |
    | Dryer not tumbling | Broken drive belt | Replace the drive belt |

    Resetting the Door Switch Assembly

    Over time, the door switch assembly on your LG dryer can become worn or damaged, leading to problems with the dryer’s operation. If you’re experiencing issues with your LG dryer, resetting the door switch assembly may help resolve them.

    Steps to Reset the Door Switch Assembly:

    1. Unplug the dryer from the power outlet. Before you begin working on the dryer, it’s important to unplug it from the power outlet to prevent any electrical accidents.
    2. Locate the door switch assembly. The door switch assembly is typically located on the side of the dryer door.
    3. Remove the door switch assembly. To remove the door switch assembly, you may need to remove a few screws.
    4. Inspect the door switch assembly. Once you have removed the door switch assembly, inspect it for any visible damage or wear.
    5. Clean or repair the door switch assembly. If you find any damage or wear, you may need to clean or repair the door switch assembly. You can clean the door switch assembly with a soft cloth or brush. If you need to repair the door switch assembly, you can purchase a replacement at a local hardware store or online.
    6. Reinstall the door switch assembly. Once you have cleaned or repaired the door switch assembly, reinstall it in the dryer.
    7. Plug the dryer back into the power outlet. Once you have reinstalled the door switch assembly, plug the dryer back into the power outlet and test to see if it’s working properly.

    If you’ve followed the steps above and your LG dryer is still not working properly, you may need to call a qualified appliance repair technician to diagnose and repair the problem.

    Replacing the Control Board

    If your LG dryer has a damaged or malfunctioning control board, it may need to be replaced. Here are the steps involved:

    1. Safety First

    Before starting any work, be sure to unplug the dryer from the power outlet.

    2. Open the Dryer

    Locate the two screws at the back of the dryer’s top panel. Remove these screws and carefully lift the top panel up.

    3. Locate the Control Board

    The control board is usually located on the back of the dryer’s front panel. It is a rectangular circuit board with several wires connected to it.

    4. Disconnect the Wires

    Note the location of each wire connected to the control board. Take a photo or create a diagram for reference. Use a screwdriver or needle-nose pliers to carefully detach each wire.

    5. Remove the Control Board

    Once all the wires are disconnected, use a screwdriver to remove the screws holding the control board in place. Carefully lift the control board out of its housing.

    6. Install the New Control Board

    Align the new control board in the housing and secure it with the screws. Connect all the wires in accordance with your diagram or photo.

    7. Power On and Test

    Plug the dryer back into the power outlet and turn it on. Observe the dryer’s operation to ensure it is functioning properly.

    8. Troubleshooting Tips

    If the dryer does not power on after replacing the control board, check the following:

    Issue Solution
    Loose wire connections Ensure all wires are securely connected.
    Faulty wiring Inspect the wiring harness for any breaks or damage.
    Power supply issue Verify that the power outlet is working correctly.

    Contacting LG Customer Support

    If you are unable to reset your LG dryer on your own, you can contact LG Customer Support for assistance. Here’s how:

    1. Call LG Customer Support: You can reach LG Customer Support by calling 1-800-243-0000. They are available 24 hours a day, seven days a week.

    2. Live Chat: You can also get help from LG Customer Support through live chat. To start a live chat, visit the LG website and click on the "Live Chat" button.

    3. Submit an Email Request: If you prefer, you can also submit an email request to LG Customer Support. To submit an email request, visit the LG website and click on the "Contact Us" button.

    4. Schedule an On-Site Service Appointment: If the issue with your dryer cannot be resolved remotely, you can schedule an on-site service appointment with LG. To schedule an on-site service appointment, visit the LG website or call LG Customer Support.

    5. Online Support: You can find helpful tips and troubleshooting information on the LG website. To access online support, visit the LG website and click on the "Support" tab.

    6. Social Media: You can also get support from LG Customer Support on social media. LG Customer Support is active on Twitter and Facebook.

    7. Customer Service Hours: LG Customer Support is available 24 hours a day, seven days a week.

    8. Contact Details: The contact details for LG Customer Support are as follows:

    Method Contact Details
    Phone 1-800-243-0000
    Live Chat LG website
    Email LG website
    On-Site Service Appointment LG website or call LG Customer Support
    Online Support LG website
    Social Media Twitter and Facebook
    1. Additional Tips:
    • When contacting LG Customer Support, have your dryer’s model number and serial number ready.
    • Be prepared to describe the issue you are experiencing with your dryer in detail.
    • Take pictures or videos of the issue to help LG Customer Support better understand the problem.
    • Be patient when contacting LG Customer Support. They may need to ask you several questions or put you on hold while they check on the status of your issue.

    Resetting LG Dryer

    To reset your LG dryer, simply follow these steps:

    1. Unplug the dryer from the power outlet.
    2. Wait 10 minutes.
    3. Plug the dryer back into the power outlet.
    4. Turn on the dryer and select the desired cycle.

    Additional Tips and Troubleshooting

    Here are some additional tips for resetting your LG dryer:

    Resetting the Dryer from the Control Panel

    Some LG dryers have a reset button on the control panel. To reset the dryer using this button, simply press and hold it for 5 seconds.

    Troubleshooting Common Dryer Problems

    If you are experiencing problems with your LG dryer, resetting it may be the solution. However, if the dryer is still not working properly, there may be another problem that needs to be addressed. Here are some common dryer problems and their possible solutions:

    Problem Possible Solution
    Dryer won’t start Check the power supply, reset the dryer, or call a repair technician.
    Dryer is noisy Clean the lint filter, check the dryer belt, or call a repair technician.
    Dryer is not drying clothes properly Clean the lint filter, check the dryer vent, or call a repair technician.

    How to Reset LG Dryer

    If your LG dryer is not working properly, you can try resetting it. This will clear all the settings and restore the dryer to its factory default settings. Here are the steps on how to do it:

    1. Unplug the dryer from the power outlet.
    2. Wait 60 seconds.
    3. Plug the dryer back into the power outlet.
    4. Turn on the dryer.
    5. Select the “Reset” option from the dryer’s menu.
    6. Press the “Start” button.

    The dryer will now reset to its factory default settings. You may need to reprogram the dryer’s settings, such as the cycle time and temperature.

    People Also Ask

    How do I reset my LG dryer if I don’t have access to the menu?

    If you don’t have access to the dryer’s menu, you can reset it by pressing and holding the “Power” and “Start” buttons simultaneously for 5 seconds.

    What will happen if I reset my LG dryer?

    Resetting your LG dryer will clear all the settings and restore the dryer to its factory default settings. You may need to reprogram the dryer’s settings, such as the cycle time and temperature.

    How often should I reset my LG dryer?

    You should only reset your LG dryer if it is not working properly. Resetting the dryer too often can damage the dryer.