Disabling External Lasers
External lasers are those that are not built into the Bulked Up device itself. They can be attached to the device using a variety of methods, including magnets, suction cups, or screws. External lasers are often used to increase the intensity of the laser beam, or to focus the beam on a specific area.
To disable an external laser, follow these steps:
- Unplug the laser from the power source.
- Remove the laser from the Bulked Up device.
- Store the laser in a safe place.
Removing the Laser from the Bulked Up Device
To remove the laser from the Bulked Up device, follow these steps:
- Locate the release button on the laser.
- Press and hold the release button.
- Gently pull the laser away from the Bulked Up device.
- Unplug the machine from the power outlet.
- Remove the back panel of the machine.
- Locate the laser control unit. It is usually a small, black box with wires running to it.
- Carefully remove the screws and unplug the wires from the laser control unit. Be sure to keep track of the wires so that you can reattach them correctly later.
- Once the laser control unit is disconnected, you can remove it from the machine.
- Press the “Menu” button on the control panel.
- Use the arrow keys to navigate to the “Laser Settings” menu.
- Press the “Enter” button to select the “Laser Settings” menu.
- Use the arrow keys to navigate to the “Enable Laser” checkbox.
- Press the “Enter” button to uncheck the “Enable Laser” checkbox.
- Press the “Menu” button to exit the “Laser Settings” menu.
- Press and hold the “Menu” button for 5 seconds.
- Use the arrow keys to select “System Settings” and press “Enter.”
- Select “Reset System Parameters” and press “Enter.”
- Confirm the reset by pressing “Yes.”
- The device will restart.
- Once the device has restarted, the system parameters will be reset to their default values.
- Recalibrate the device according to the manufacturer’s instructions.
- On a platform overlooking the main courtyard
- In a room behind the building with the “Vault” sign
- On a rooftop near the end of the mission
If you are having difficulty removing the laser, you may need to use a screwdriver to loosen the screws that are holding the laser in place. Once the screws are loose, you should be able to pull the laser away from the Bulked Up device.
| Step | Action |
|---|---|
| 1 | Unplug the laser from the power source. |
| 2 | Locate the release button on the laser and press and hold it. |
| 3 | Gently pull the laser away from the Bulked Up device. |
Isolating the Laser Control Unit
To isolate the laser control unit, you will need to follow these steps:
Removing the Laser Unit From the Machine
To disable the lasers, you must remove the laser unit from the machine. This can be a complex process, so it is important to follow the instructions carefully.
| Step | Description |
|---|---|
| 1 | Unplug the machine from the power outlet. |
| 2 | Remove the back panel of the machine. |
| 3 | Locate the laser control unit. It is usually a small, black box with wires running to it. |
| 4 | Disconnect the wires from the laser control unit. Be sure to keep track of the wires so that you can reattach them correctly later. |
| 5 | Remove the screws and unplug the wires from the laser unit. |
| 6 | Carefully remove the laser unit from the machine. |
Overriding Laser Output
In certain circumstances, it may be necessary to override the laser output on a Bulked Up machine. This can be done by accessing the machine’s control panel and navigating to the “Laser Settings” menu. From there, you can disable the laser output by unchecking the “Enable Laser” checkbox.
Once the laser output has been disabled, the machine will no longer emit any laser light. This can be useful for troubleshooting purposes or when performing certain maintenance tasks.
Note: Disabling the laser output will not affect the operation of the machine’s other functions. However, it is important to remember to re-enable the laser output when you are finished with your work.
Here are the steps on how to disable the laser output on a Bulked Up machine:
| Step # | Action |
|---|---|
| 1 | Press the “Menu” button on the control panel. |
| 2 | Use the arrow keys to navigate to the “Laser Settings” menu. |
| 3 | Press the “Enter” button to select the “Laser Settings” menu. |
| 4 | Use the arrow keys to navigate to the “Enable Laser” checkbox. |
| 5 | Press the “Enter” button to uncheck the “Enable Laser” checkbox. |
| 6 | Press the “Menu” button to exit the “Laser Settings” menu. |
Resetting System Parameters
To reset the system parameters on a Bulked Up device, follow these steps:
| Parameter | Default Value |
|---|---|
| Laser Power | 50% |
| Laser Speed | Medium |
| Laser Pulse Width | 200 μs |
Ensuring Safety Protocols
Pre-Operation Checks
Before operating the laser, ensure that:
* All safety devices (e.g., interlocks, warning lights) are functional.
* The work area is clear of obstructions and flammable materials.
* Personnel wear appropriate personal protective equipment (PPE), including laser safety glasses and protective clothing.
* The beam path is clearly defined and marked.
Operation Considerations
* Never operate a laser without adequate training and supervision.
* Maintain a safe distance from the beam and its reflection.
* Use laser safety shields or curtains to minimize exposure.
* Restrict access to the laser area to authorized personnel.
Emergency Procedures
* In case of an accident, immediately shut down the laser and evacuate the area.
* Call for medical assistance if anyone is injured.
* Notify the appropriate authorities (e.g., safety department, fire department).
Post-Operation Precautions
* Allow the laser to cool down before handling it.
* Clean and inspect the laser and its components regularly.
* Follow manufacturer’s instructions for maintenance and disposal.
Additional Safety Measures
* Establish clear operating procedures and ensure that all personnel follow them.
* Conduct regular safety audits to identify and mitigate potential hazards.
* Train personnel on proper laser safety practices and the importance of compliance.
* Provide regular updates and revisions to safety protocols based on industry best practices and technological advancements.
How to disable lasers on Bulked up
The lasers on Bulked Up can be disabled by completing the “Deactivate the Laser Turrets” objective during the mission. To complete this objective, players must locate and interact with three laser control panels located around the map. Once all three panels have been interacted with, the lasers will be disabled.
The laser control panels are located in the following areas:
People also ask
How do I get to the laser control panels?
To get to the laser control panels, you will need to follow the objective markers. The first panel is located on a platform overlooking the main courtyard. To get to this platform, you will need to climb the ladder next to the “Vault” sign. The second panel is located in a room behind the building with the “Vault” sign. To get to this room, you will need to go through the door on the left side of the building. The third panel is located on a rooftop near the end of the mission. To get to this rooftop, you will need to climb the ladder next to the door at the end of the mission area.
What happens if I don’t disable the lasers?
If you do not disable the lasers, they will continue to fire on you and your team, making it difficult to complete the mission. In addition, the lasers will also damage the APC, which can lead to its destruction.
Is there any other way to disable the lasers?
No, there is no other way to disable the lasers. You must complete the “Deactivate the Laser Turrets” objective in order to disable the lasers.
