3 Easy Steps to Connect Tozo Headphones

tozo headphones

Are you looking for an easy way to connect your TOZO headphones to your device? Whether you’re using them with your phone, tablet, or laptop, we’ll guide you through the simple steps to get them up and running in no time. Our comprehensive instructions will ensure a seamless connection and an immersive audio experience.

Before we dive into the connection process, let’s ensure you have everything you need. Make sure your TOZO headphones are fully charged and within close proximity to your device. You’ll also need Bluetooth enabled on your device, which is typically found in the settings menu. With these prerequisites in place, let’s proceed with the connection.

To initiate the connection, press and hold the power button on your TOZO headphones for a few seconds until the indicator light starts flashing rapidly. This indicates that the headphones are in pairing mode. Now, navigate to the Bluetooth settings on your device and search for available devices. Select “TOZO” from the list of discovered devices and wait for the connection to establish. Once connected, you’ll hear a prompt and the indicator light will stop flashing, signaling a successful pairing.

Power On and Pair Mode

Step 1: Power On Your Tozo Headphones

For TWS models (such as the T10, T6, T5):
- Open the charging case. The headphones will automatically power on and enter pairing mode.
For single-earbud models (such as the T13, T9):
- Press and hold the power button on the earbud for about 3 seconds until it lights up.

Step 2: Enter Pairing Mode

For TWS models:
- If the headphones do not enter pairing mode automatically when powered on, press and hold the button on the charging case for about 5 seconds until the indicator lights flash rapidly.
For single-earbud models:
- Press and hold the power button on the earbud for about 5 seconds until the indicator light starts flashing rapidly.

Verification

To confirm that your headphones are in pairing mode, check the following:

TWS Models	Single-Earbud Models
Indicator lights on the charging case or earbuds flash rapidly	Indicator light on the earbud flashes rapidly

Note: Once your headphones are in pairing mode, they will be visible to nearby Bluetooth devices for a limited time (typically around 5 minutes). If pairing is not completed within this time, the headphones will exit pairing mode and you will need to repeat the steps to re-enter pairing mode.

Pairing with a Bluetooth Device

Step 1: Prepare Your Headphones

Ensure that your Tozo headphones are fully charged or have sufficient battery life.
Activate Bluetooth mode on the headphones by pressing and holding the power button for approximately 5 seconds. You’ll hear a series of beeps and see a flashing LED indicator.

Step 2: Find and Connect to the Headphones

On iOS Devices:

Open the Bluetooth settings menu in your iOS device.
Scan for available Bluetooth devices.
Select the "Tozo NC2" or "Tozo T6" option when it appears in the search results.
You’ll hear an audible confirmation once they’re paired successfully.

On Android Devices:

Navigate to the Bluetooth settings menu in your Android device.
Tap on "Scan" or "Search for devices."
Locate the "Tozo NC2" or "Tozo T6" option in the list of available devices.
Select the option and enter the pairing code "0000" if prompted.
Your headphones will be connected successfully after a few moments.

Troubleshooting Tips

If your headphones are not appearing in the search results, try restarting them and re-entering Bluetooth mode.
Ensure that Bluetooth is enabled on both your headphones and the Bluetooth device you’re trying to connect.
If you encounter any issues, refer to the manufacturer’s instructions or contact customer support for assistance.

Multipoint Connection

Multipoint connection allows Tozo headphones to connect with two devices simultaneously. This is useful for users who want to listen to music on a smartphone but still be able to receive calls on a laptop.

To enable multipoint connection, follow these steps:

Connect your Tozo headphones to your smartphone.
Turn off the Bluetooth on your smartphone.
Turn on the Bluetooth on your laptop and search for your Tozo headphones.
Once your headphones are connected to your laptop, turn on the Bluetooth on your smartphone again.
Your Tozo headphones will now be connected to both your smartphone and your laptop at the same time.

While connected to multiple devices, your Tozo headphones will automatically switch between devices depending on which device is sending audio.

Device	How to switch
Smartphone	Press the play/pause button on your smartphone
Laptop	Click on the Bluetooth icon in the taskbar and select your Tozo headphones

How to Connect Tozo Headphones

To connect your Tozo headphones to your device, follow these steps:

Turn on your headphones by pressing and holding the power button for about 3 seconds.
Open the Bluetooth settings on your device and search for “Tozo” in the list of available devices.
Once you find “Tozo,” tap on it to connect your headphones.
You should now hear a voice prompt confirming that your headphones are connected.
If you are having trouble connecting your headphones, try resetting them by following the steps below.

Resetting the Headphones

If you are having trouble connecting your Tozo headphones, try resetting them by following these steps:

Turn off your headphones and wait for about 10 seconds.
Press and hold the power button and the volume up button for about 10 seconds.
The headphones will turn on and enter pairing mode.
Open the Bluetooth settings on your device and search for “Tozo” in the list of available devices.
Once you find “Tozo,” tap on it to connect your headphones.

If you are still having trouble connecting your headphones, please contact Tozo customer support for assistance.

Compatibility with Different Devices

Pairing with Android Devices

– Activate Bluetooth on your Android device.
– Open the Tozo headphones charging case.
– Search for “Tozo” in the Bluetooth menu and connect.

Pairing with iOS Devices

– Turn on Bluetooth on your iOS device.
– Remove the Tozo headphones from the case.
– The pairing window will pop up; tap “Connect.”

Pairing with Laptops and Desktops

– Ensure the Bluetooth feature is enabled on your laptop or desktop.
– Place the Tozo headphones in pairing mode by pressing and holding the multi-function button until the LED indicator starts blinking rapidly.
– Search for “Tozo” in the Bluetooth settings and connect.

Compatibility with Other Bluetooth Devices

Tozo headphones are compatible with most Bluetooth-enabled devices, including smartwatches, tablets, and even gaming consoles. To pair with these devices, follow the pairing instructions provided in their respective user manuals.

Troubleshooting Connection Issues

– Ensure both the headphones and the device you’re trying to connect to have their Bluetooth turned on.
– Check if the headphones are within range (up to 33 feet).
– Reset the headphones by holding the multi-function button for 10 seconds.
– Contact Tozo customer support for further assistance.

Supported Bluetooth Profiles

The following table lists the Bluetooth profiles supported by Tozo headphones:

Profile	Description
A2DP	Advanced Audio Distribution Profile (for streaming audio)
AVRCP	Audio/Video Remote Control Profile (for controlling playback)
HFP	Hands-Free Profile (for phone calls)
HSP	Headset Profile (for phone calls)

How To Connect Tozo Headphones

To connect your TOZO headphones to your phone or other Bluetooth device, follow these steps:

Turn on your headphones by holding down the power button for 3 seconds.
Open the Bluetooth settings on your phone or other Bluetooth device.
Find the TOZO headphones in the list of available devices and tap on them to connect.
Once the headphones are connected, you will hear a voice prompt and the LED indicator on the headphones will turn blue.