Featured Image
[Image of a 2023 Jeep Sahara 4xe parked at a gas station]
The 2023 Jeep Sahara 4xe is a plug-in hybrid vehicle that offers the best of both worlds: fuel efficiency and off-road capability. With a combined fuel economy of 56 MPGe, the 4xe can go up to 21 miles on electricity alone. But when you need to go farther, the 4xe’s 2.0-liter turbocharged four-cylinder engine kicks in to provide plenty of power.
Refueling the 4xe is a simple process, but there are a few things you need to know. First, the 4xe has two fuel tanks: one for gasoline and one for diesel. The gasoline tank is located on the left side of the vehicle, and the diesel tank is located on the right side. Second, the 4xe’s fuel filler necks are different sizes. The gasoline filler neck is larger than the diesel filler neck, so make sure you use the correct nozzle when refueling.
To refuel the 4xe, follow these steps:
- Park the vehicle on a level surface.
- Turn off the engine.
- Open the fuel filler door.
- Insert the correct fuel nozzle into the fuel filler neck.
- Squeeze the trigger on the fuel nozzle to start refueling.
- Once the fuel tank is full, remove the fuel nozzle and close the fuel filler door.
Step-by-Step Guide: Fueling the 2023 Jeep Sahara 4xe
1. Locate the Fuel Filler Door
The fuel filler door for the 2023 Jeep Sahara 4xe is located on the passenger side of the vehicle, near the rear wheel. It is marked with a fuel symbol and may have a small lever or button to release it. To open the fuel filler door, simply pull the lever or press the button and it will pop open.
Once the fuel filler door is open, you will see the fuel filler neck and a fuel cap. The fuel filler neck is the hole where you insert the fuel nozzle, and the fuel cap is the cover that you remove to access the fuel tank.
Before inserting the fuel nozzle, ensure that the fuel cap is tightened securely. This will prevent fuel from leaking out during refueling.
The fuel filler door also has a fuel filler tether, which is a small cable or strap that attaches the fuel cap to the fuel filler door. This tether prevents the fuel cap from getting lost or falling off during refueling.
Here are some additional tips for locating the fuel filler door on the 2023 Jeep Sahara 4xe:
- If you’re unsure which side of the vehicle the fuel filler door is on, you can check the owner’s manual or look for a small arrow near the fuel gauge on the dashboard.
- If the fuel filler door is frozen shut, you can use a de-icer or warm water to thaw it out. Be careful not to use too much heat, as this could damage the door.
2. Insert the Fuel Nozzle
Once the fuel filler door is open, insert the fuel nozzle into the fuel filler neck. The fuel nozzle will fit snugly into the fuel filler neck, and it will automatically shut off when the fuel tank is full.
While refueling, hold the fuel nozzle in place until the fuel tank is full. Do not attempt to “top off” the fuel tank, as this can damage the fuel system.
Once the fuel tank is full, remove the fuel nozzle and replace the fuel cap. Tighten the fuel cap securely, and ensure that it is fully closed.
3. Reset the Fuel Trip Meter
After refueling, you may want to reset the fuel trip meter. This will help you track your fuel consumption and estimate how far you can drive before you need to refuel again.
To reset the fuel trip meter, simply press and hold the “Trip” button on the dashboard until the display resets to zero. You can also reset the fuel trip meter through the vehicle’s infotainment system.
4. Safety Precautions
It is important to follow these safety precautions when refueling your 2023 Jeep Sahara 4xe:
- Turn off the engine before refueling.
- Do not smoke or use open flames near the fuel filler door.
- Do not overfill the fuel tank.
- Replace the fuel cap securely after refueling.
- If you spill fuel on yourself or your clothing, rinse it off immediately with water.
- If you have any questions or concerns about refueling your 2023 Jeep Sahara 4xe, please consult your owner’s manual or contact your local Jeep dealer.
Fuel Filler Door Location | Passenger side, near the rear wheel |
---|---|
Fuel Filler Neck Size | Regular (0.625 inches) |
Fuel Capacity | 17.2 gallons |
Locating the Fuel Door
The fuel door on the 2023 Jeep Sahara 4xe is located on the **passenger side**. To find it, stand facing the front of the vehicle. The fuel door will be located **behind the rear wheel**, **in front of the wheel well**. It will be a small, rectangular door with a **gas pump symbol** on it.
To open the fuel door, pull the **release lever** located inside the vehicle, near the driver’s seat. The fuel door will pop open, giving you access to the fuel tank.
When you are finished fueling your vehicle, close the fuel door by pushing it shut until it clicks into place. Make sure that the fuel door is closed securely to prevent fuel from leaking out.
Understanding the Fuel Type and Capacity
The 2023 Jeep Sahara 4xe is a hybrid vehicle, combining a 2.0 liter turbocharged inline-four gasoline engine with two electric motors and a 17.1 kWh lithium-ion battery pack. It utilizes a combination of gasoline and electric power to optimize performance and efficiency.
The gasoline fuel capacity of the 2023 Jeep Sahara 4xe is 18.3 gallons, providing an estimated range of 440 miles on gasoline alone. The electric-only range is approximately 25 miles with a fully charged battery, allowing for short trips and errands without gasoline consumption.
Fueling the 2023 Jeep Sahara 4xe
To refuel the 2023 Jeep Sahara 4xe, follow these steps:
Step | Action |
---|---|
1 | Locate the fuel door on the driver’s side rear quarter panel. |
2 | Remove the fuel cap by turning it counterclockwise. |
3 | Insert the fuel nozzle into the fuel filler neck. Note that the nozzle has a special “anti-spill” design, which may require some initial pressure to engage. |
4 | Dispense gasoline into the fuel tank until the auto-stop function of the fuel nozzle triggers, indicating that the tank is full. |
5 | Remove the fuel nozzle and replace the fuel cap securely. |
It’s important to note that using the correct fuel type is essential. The 2023 Jeep Sahara 4xe requires unleaded gasoline with an octane rating of 87 or higher.
Removing the Fuel Cap
- Locate the fuel door: It’s usually on the driver’s side of the vehicle, behind a small hinged door.
- Press the fuel door release button: This is typically a small button on or near the fuel door that unlocks the latch.
- Open the fuel door: Gently pull the fuel door towards you.
- Unscrew the fuel cap and remove it: Turn the fuel cap counterclockwise to loosen it. Grip the cap’s handle and pull it straight up to remove it completely.
Detailed Instructions for Unscrewing the Fuel Cap
To ensure safe and efficient removal of the fuel cap, follow these steps:
- Check the area for obstructions: Ensure there is ample space for your hand and the fuel cap to move freely.
- Use a secure grip: Position your hand firmly on the fuel cap’s handle or designated grip area.
- Turn counterclockwise to loosen: Gradually rotate the cap in a counterclockwise direction until it loosens from the fuel tank.
- Remove the cap straight up: Once the cap is loose, lift it directly upwards from the fuel tank.
- Avoid spilling fuel: Hold the cap securely as you remove it to minimize any spillage of fuel.
Inserting the Fuel Nozzle
Once you have located the fuel filler door, open it by pressing the small button on the door. This will release the latch and allow you to open the door. Once the door is open, you will see the fuel filler neck.
Locate the Fuel Filler Neck
The fuel filler neck is the opening in the vehicle’s body where you insert the fuel nozzle. It is usually located on the side of the vehicle, near the rear wheel. The fuel filler neck may have a cap or a door that needs to be opened before you can insert the nozzle.
Open the Fuel Filler Cap or Door
If the fuel filler neck has a cap, unscrew it by turning it counterclockwise. If the fuel filler neck has a door, press the button or lever to open it.
Insert the Fuel Nozzle
Insert the fuel nozzle into the fuel filler neck. The nozzle should fit snugly into the neck. If the nozzle is not inserted properly, fuel may spill out.
Select the Fuel Grade
Once the fuel nozzle is inserted, select the fuel grade you want to dispense. The fuel grade will be displayed on the fuel pump.
Start Dispensing Fuel
Once you have selected the fuel grade, press the trigger on the fuel nozzle to start dispensing fuel. The fuel will flow into the vehicle’s fuel tank.
Stop Dispensing Fuel
When the fuel tank is full, the fuel nozzle will automatically shut off. If the fuel nozzle does not shut off automatically, release the trigger to stop dispensing fuel.
Insert the Fuel Nozzle |
---|
|
Dispensing Fuel
**1. Locate the fuel filler door:** It is usually on the side of the vehicle, near the rear wheel.
**2. Open the fuel filler door:** Use the fuel door release lever inside the vehicle. It is often located near the driver’s seat.
**3. Remove the fuel cap:** Turn the fuel cap counterclockwise and pull it up.
**4. Insert the fuel nozzle:** Slowly insert the fuel nozzle into the fuel filler neck. Make sure it is fully inserted.
**5. Select the fuel grade:** Choose the fuel grade recommended by Jeep for the vehicle. It is usually displayed on the fuel filler door.
**6. Start fueling:** Pull the fuel nozzle trigger to start dispensing fuel. Hold it in this position until the fuel tank is full.
Safety Precautions
When dispensing fuel, it is crucial to observe the following safety precautions:
* Park the vehicle on a level surface.
* Turn off the engine.
* Do not smoke or use any open flames near the fuel tank.
* Avoid overfilling the fuel tank.
* Keep the fuel filler area clean of debris.
* Do not leave the fuel nozzle unattended while fueling.
* Always replace the fuel cap securely after fueling.
Fuel Capacity and Recommended Fuel Grade
Fuel Tank Capacity | 10.8 gallons |
---|---|
Recommended Fuel Grade | 87 octane or higher |
**7. Remove the fuel nozzle:** Once the fuel tank is full, the fuel nozzle will automatically shut off. Slowly remove it and return it to the pump.
**8. Replace the fuel cap:** Align the fuel cap and turn it clockwise to tighten it.
**9. Close the fuel filler door:** Push the fuel door closed until it locks.
Monitoring Fuel Levels
As an electric vehicle, the 2023 Jeep Sahara 4xe does not require regular gasoline refills like a conventional car. However, it does still have a small fuel tank for extended range purposes. Monitoring the fuel levels in both the electric battery and the gas tank is essential for optimal performance.
Checking Electric Battery Level
The electric battery level can be checked on the instrument cluster display. The gauge indicates the remaining battery capacity as a percentage. When the battery is low, the “Electric Only” mode may not be available, and the vehicle will automatically switch to hybrid mode.
Checking Fuel Tank Level
Checking the fuel tank level is similar to a conventional car:
- Locate the fuel tank door, which is usually on the passenger side of the vehicle.
- Open the fuel tank door by pressing the release button inside the vehicle.
- Unscrew the fuel cap.
- Insert the fuel nozzle into the fuel tank opening.
- Hold the fuel nozzle trigger until the fuel tank is full.
- Remove the fuel nozzle and tighten the fuel cap.
- Close the fuel tank door.
Fuel Type | Capacity |
---|---|
Gasoline | 13.3 gallons |
Replacing the Fuel Cap
To replace the fuel cap on a 2023 Jeep Sahara 4xe, follow these steps:
- Park the vehicle on a level surface and turn off the engine.
- Locate the fuel door on the rear passenger side of the vehicle.
- Open the fuel door by pressing the release button inside the vehicle.
- Unscrew the old fuel cap counterclockwise and remove it.
- Inspect the fuel cap and O-ring for any damage or wear.
- If the cap or O-ring is damaged, replace it with a new one.
- Clean the fuel filler neck and the inside of the fuel door with a clean cloth.
- Screw the new fuel cap onto the fuel filler neck clockwise until it clicks.
- Close the fuel door and ensure it is securely latched.
Referencing Diagrams and Videos
For additional assistance, refer to the owner’s manual or online resources for diagrams and videos that demonstrate the fuel cap replacement process.
Additional Tips
- Avoid overtightening the fuel cap, as this can damage the cap or the fuel filler neck.
- Store the old fuel cap in a safe place in case it is needed in the future.
- Check the fuel cap regularly for any damage or loose connections to ensure proper fuel system operation.
Precautions and Safety Considerations
1. Turn off the engine:
It’s essential to turn off the engine before fueling your 2023 Jeep Sahara 4xe to prevent any potential sparks or ignition.
2. Park on a flat surface:
Ensure that your vehicle is parked on a flat and stable surface while fueling to avoid fuel spillage and ensure proper fuel flow.
3. Wear appropriate gear:
When handling fuel, wear gloves and safety glasses to protect yourself from potential exposure to fuel fumes or spills.
4. Check the fuel cap:
Before fueling, visually inspect the fuel cap to ensure it’s securely tightened and free of any damage or debris.
5. Handle the fuel nozzle carefully:
When using the fuel nozzle, hold it securely and never leave it unattended during the fueling process.
6. Stay away from open flames:
Avoid smoking or having any open flames near the fueling area to prevent potential ignition hazards.
7. Don’t overfill the tank:
Pay attention to the fuel level indicator and stop fueling once the tank is full. Overfilling can lead to fuel overflow and potential spillage.
8. Clean up spills immediately:
If any fuel spills occur during the process, clean them up promptly using absorbent materials like rags or paper towels.
9. Check for leaks:
After fueling, inspect the fuel lines and components for any signs of leaks. If you notice any leaks, contact your mechanic immediately for repairs.
Fuel Tank Location
Locate the fuel tank cap on the driver’s side of the vehicle, near the rear bumper.
Fuel Type
Use Unleaded 87 Octane Gasoline only.
Fueling Procedure
- Insert the fuel pump nozzle into the fuel tank.
- Squeeze the trigger to start fueling.
- Fill the tank until the automatic shut-off valve triggers.
- Remove the nozzle and secure the fuel cap.
Troubleshooting Fueling Issues
Fuel Gauge Not Registering
Wait a few minutes for the fuel gauge to update. If it still doesn’t register, check for a faulty fuel tank sending unit or wiring.
Fuel Ingression into Passenger Compartment
Ensure the fuel cap is properly tightened. If the issue persists, check for leaks in the fuel tank, fuel lines, or evaporative emissions system.
Difficulty Inserting or Removing Fuel Nozzle
Check if the fuel nozzle is facing correctly. If it’s still difficult, inspect for any obstructions in the fuel tank opening or nozzle.
Automatic Shut-Off Valve Not Triggering
Ensure the fuel tank is not overfilled. If it’s not, check for a faulty automatic shut-off valve or obstructed fuel lines.
Fuel Leakage
Check for leaks around the fuel tank, fuel lines, and injection system. Avoid operating the vehicle if fuel is leaking, and seek professional assistance.
Fuel System Warnings
Warning Light | Meaning |
---|---|
Check Engine Light | Engine malfunction, including fuel system issues |
Low Fuel Indicator | Less than 10% fuel remaining |
Fuel Filler Door Open | Fuel filler door is not closed properly |
How to Put Fuel in a 2023 Jeep Sahara 4xe
The 2023 Jeep Sahara 4xe is a plug-in hybrid vehicle, which means it can run on gasoline or electricity. If you need to refuel your Sahara 4xe, follow these steps:
- Park your Jeep on a level surface.
- Turn off the engine.
- Open the fuel cap located on the rear passenger side of the vehicle.
- Insert the fuel nozzle into the fuel filler neck.
- Squeeze the trigger on the fuel nozzle to begin fueling.
- Once the fuel tank is full, click the nozzle to stop fueling.
- Remove the fuel nozzle from the fuel filler neck.
- Close the fuel cap.
People also ask
Can I use regular gasoline in my 2023 Jeep Sahara 4xe?
Yes, you can use regular gasoline in your 2023 Jeep Sahara 4xe. The vehicle’s engine is designed to run on regular unleaded gasoline with an octane rating of 87 or higher.
How often should I refuel my 2023 Jeep Sahara 4xe?
The frequency with which you need to refuel your 2023 Jeep Sahara 4xe will depend on how much you drive and how often you use the electric motor. If you drive primarily on electricity, you may only need to refuel your vehicle every few weeks or even months. However, if you drive primarily on gasoline, you may need to refuel your vehicle more frequently.
Where is the fuel filler neck located on my 2023 Jeep Sahara 4xe?
The fuel filler neck is located on the rear passenger side of the vehicle, behind the fuel cap.