Embark on a seamless snow-clearing journey with Ariens snowblowers, renowned for their exceptional performance and reliability. Whether you’re a seasoned homeowner or a professional landscaper, navigating the complexities of winter’s wrath becomes effortless with these state-of-the-art machines. Ariens snowblowers empower you to conquer even the most daunting snowfall with their unparalleled efficiency and user-friendliness. Join us as we delve into the intricacies of starting your Ariens snowblower, ensuring you’re well-equipped to combat the icy challenges of winter.
Before embarking on your snow-clearing mission, it’s imperative to conduct a thorough pre-start inspection. Begin by verifying the fuel level in the snowblower’s tank, ensuring it’s adequately filled with fresh gasoline. Next, locate the oil dipstick and check the oil level, adding more if necessary. Pay close attention to the condition of the spark plug, replacing it annually to maintain optimal performance. Finally, inspect the auger and impeller components, clearing any debris that may impede their smooth operation.
With the pre-start inspection complete, you can now confidently proceed to starting your Ariens snowblower. Locate the engine’s choke lever and move it to the “choke” position, which restricts airflow and enriches the fuel mixture. This aids in starting a cold engine. Continue by firmly grasping the starter handle and pulling it vigorously until the engine sputters to life. Once the engine starts, gradually return the choke lever to the “run” position, allowing the engine to warm up before engaging the auger and impeller.
Unboxing and Assembly
1. Unboxing the Ariens Snowblower
Unboxing your Ariens snowblower is a straightforward process that can be completed in about 30 minutes. Here’s a step-by-step guide to help you get started:
- Carefully remove the snowblower from the shipping crate. Use the provided handles or enlist the help of an assistant to lift the snowblower safely.
- Check the contents of the crate. In addition to the snowblower, you should find an assembly manual, a bag of hardware, and possibly some optional accessories.
- Locate the assembly instructions. The assembly manual will provide detailed instructions on how to assemble your Ariens snowblower. Read through the manual thoroughly before beginning.
- Gather your tools. You will need a few basic tools to assemble your snowblower, such as a wrench, screwdriver, and socket set.
- Protect your work surface. To prevent any damage to the snowblower or your work surface, consider laying down a piece of cardboard or a tarp.
Preparing the Engine
Before starting your Ariens snowblower, it’s important to prepare the engine properly to ensure a smooth and efficient operation. Follow these steps:
1. Check the Oil Level
Using the dipstick, check the oil level in the engine. If it’s low, add more oil until it reaches the “full” mark on the dipstick.
2. Inspect the Spark Plug
Remove the spark plug wire and inspect the spark plug. Clean any dirt or debris from the electrodes, and check for signs of wear or damage. If the spark plug is damaged or worn, replace it with a new one.
Spark Plug Inspection and Replacement Table:
| Inspection Point | Action |
|---|---|
| Spark plug clean and dry | No action required |
| Spark plug wet or fouled | Clean or replace spark plug |
| Spark plug electrodes worn | Replace spark plug |
| Spark plug damaged | Replace spark plug |
3. Prime the Fuel Pump
Locate the fuel pump primer bulb and squeeze it several times until you feel resistance. This will prime the fuel pump and ensure that fuel is reaching the carburetor.
Engaging the Auger and Impeller
To engage the auger and impeller on your Ariens snowblower, follow these steps:
1. Start the Engine
Turn the key in the ignition switch to the “start” position and hold it until the engine starts. Allow it to warm up for a few minutes.
2. Set the Throttle
Move the throttle lever to the desired speed. Choose a higher speed for heavy or wet snow and a lower speed for light or dry snow.
3. Engage the Auger
Pull the auger control lever toward you to engage the auger blades. The auger will rotate and begin moving snow into the impeller.
4. Engage the Impeller
Pull the impeller control lever toward you to engage the impeller blades. This will rotate the impeller and discharge the snow through the chute.
5. Adjust the Chute
Use the chute control lever to adjust the direction and angle of the snow discharge. Simply move the lever in the desired direction.
|
Snow Conditions |
Throttle Setting |
|---|---|
|
Light or dry snow |
Low |
|
Heavy or wet snow |
High |
Controlling the Chute
The chute of your Ariens snowblower allows you to direct the snow where you want it to go. To control the chute, use the following steps:
- Locate the chute control lever, which is typically located on the right side of the snowblower.
- Move the lever to the desired position. The lever will typically have several settings, such as “left”, “right”, “up”, and “down”.
- Once you have selected the desired position, release the lever. The chute will now be set to that position.
- To change the position of the chute, simply repeat steps 1-3.
- When not in use, the chute should be stored in the “closed” position.
- Refer to the table below for more information on the different chute positions.
Position Description Left Directs the snow to the left side of the snowblower. Right Directs the snow to the right side of the snowblower. Up Directs the snow up and out of the chute. Down Directs the snow straight down to the ground. Closed Closes the chute to prevent snow from being discharged. Safety Precautions
- Read the operator’s manual carefully before operating the snowblower.
- Wear earplugs or earmuffs to protect your hearing.
- Wear eye protection such as safety glasses or goggles to protect your eyes from snow, ice and other debris.
- Wear warm, waterproof clothing and boots to stay comfortable and dry while operating the snowblower.
- Never operate the snowblower on a slope exceeding 15 degrees.
- Be aware of your surroundings and keep children and pets away from the snowblower while it is in operation.
- Do not operate the snowblower while under the influence of alcohol or drugs.
- Keep the area around the snowblower clear of debris and obstacles.
- Inspect the snowblower for any damage or loose parts before each use.
- Never leave the snowblower running unattended.
10. Shut off the snowblower before making any adjustments or repairs.
This is important to prevent accidental injury. Always shut off the engine and allow the snowblower to come to a complete stop before making any adjustments or repairs.
How To Start Ariens Snowblower
The Ariens snowblower is a powerful and efficient machine that can make quick work of even the heaviest snowfalls. However, if you’re not familiar with how to start an Ariens snowblower, it can be a bit daunting. Here are a few simple steps to get you started:
- Check the oil level. The oil level should be checked before each use. If the oil level is low, add oil until it reaches the full mark on the dipstick.
- Fill the fuel tank. The fuel tank should be filled with fresh, unleaded gasoline. Do not use gasoline that is more than 30 days old.
- Locate the starter cord. The starter cord is usually located on the side of the snowblower. Pull the starter cord slowly until the engine starts.
- Engage the auger. The auger is the part of the snowblower that actually moves the snow. To engage the auger, pull the auger lever towards you.
- Start blowing snow! Once the auger is engaged, you can start blowing snow. Point the snowblower in the direction you want to blow the snow and squeeze the trigger.
People Also Ask About How To Start Ariens Snowblower
How do I troubleshoot a snowblower that won’t start?
There are a few things you can check if your snowblower won’t start:
- Make sure the oil level is full.
- Make sure the fuel tank is full and the fuel is fresh.
- Check the spark plug.
- Check the air filter.
- If you’ve checked all of these things and the snowblower still won’t start, you may need to take it to a qualified repair shop.
How do I adjust the carburetor on my Ariens snowblower?
To adjust the carburetor on your Ariens snowblower, follow these steps:
- Locate the carburetor. The carburetor is usually located on the side of the engine.
- Adjust the idle speed screw. The idle speed screw is usually located on the bottom of the carburetor.
- Adjust the high speed screw. The high speed screw is usually located on the top of the carburetor.
- Start the snowblower and let it run for a few minutes.
- If the engine is running rough, adjust the carburetor settings until the engine runs smoothly.
How do I change the oil in my Ariens snowblower?
To change the oil in your Ariens snowblower, follow these steps:
- Locate the oil drain plug. The oil drain plug is usually located on the bottom of the engine.
- Place an oil pan under the oil drain plug.
- Remove the oil drain plug.
- Let the oil drain out completely.
- Replace the oil drain plug.
- Add new oil to the engine. The oil capacity of your Ariens snowblower can be found in the owner’s manual.
