The Bob stroller is a popular choice for parents thanks to its durability, maneuverability, and ease of use. However, if you’re not familiar with the stroller, collapsing it can be a bit of a challenge. Here’s a step-by-step guide on how to collapse the Bob stroller so you can easily transport it or store it away.
Begin collapsing the Bob stroller by folding in the handlebars. While squeezing the handlebar levers, push the handlebars down toward the front tires. Next, pull up the center lever located near the base of the seat to release the seat recline. Once the seat is unlatched, you can then fold it down. Finally, use your foot to press down on the black pedal at the base of the stroller and pull up on the side handles to fold the stroller frame.
When the stroller is fully collapsed, it will lock into place automatically. You can now carry it using the carry handle located at the top of the stroller or store it in your trunk or closet. To unfold the stroller, simply reverse the steps listed above. Unfold the stroller frame, raise the seat back into place, and lock the recline lever. Finally, push the handlebars back up into place and secure them with the handlebar levers.
Tips for Compact Collapsing
1. Secure the seat: Remove the child from the stroller, then unlock and recline the seat to a flat position.
2. Fold the canopy: If your stroller has a canopy, collapse it by pressing the buttons or levers on its sides.
3. Detach any accessories: Remove the cup holder, carrycot, or other accessories that may hinder the folding process.
4. Collapse the handlebar: Unlock the handlebar and fold it down towards the rear wheels.
5. Engage the fold latch: Depending on the stroller model, you may need to press a button or pull a lever to activate the fold latch.
6. Complete the fold: Push down on the handlebars or kick the rear wheels to collapse the stroller completely. Some strollers have an automatic fold mechanism that does this for you.
For strollers with a two-step fold:
After following the steps above, you may need to perform an additional step to fully collapse the stroller. This usually involves rotating the handlebar or pressing a button to lock it in place.
7. Secure the stroller: Once the stroller is collapsed, engage the locking mechanism to keep it closed during storage or transportation.
Unfolding the Bob Stroller
1. Locate the release levers on both sides of the stroller frame.
2. Pull the levers outward and upward simultaneously.
3. Lift the handlebar up until it locks into place.
Folding the Bob Stroller
1. Push down on the release button located on the top of the handlebar.
2. Lower the handlebar until it is parallel to the ground.
3. Push the stroller frame together until it folds into a compact size.
4. Secure the stroller with the attached strap or hook.
Cleaning the Bob Stroller
1. Use a damp cloth to wipe down the frame, wheels, and fabric surfaces.
2. For tougher stains, use a mild soap solution.
3. Rinse the stroller with clean water and let it air dry.
Maintenance After Collapsing
1. Check the frame for any damage or loose parts. Tighten any loose screws or bolts as needed.
2. Inspect the wheels for wear or damage. Replace any damaged wheels or bearings.
3. Lubricate the moving parts of the stroller, such as the hinges and wheels, with a light oil or silicone spray.
4. Check the fabric surfaces for any tears or holes. Repair any damaged fabric promptly.
5. Store the stroller in a dry, protected place when not in use.
Additional Tips
1. When folding the stroller, make sure that the wheels are aligned so that they do not rub against each other during storage.
2. To extend the life of your stroller, avoid exposing it to extreme weather conditions or heavy use.
Cleaning and Maintenance Schedule (Example)
| Task | Frequency |
|---|---|
| Wipe down with damp cloth | Monthly |
| Clean with mild soap solution | As needed |
| Lubricate moving parts | Every 6 months |
| Inspect and tighten loose parts | Annually |
How To Collapse Bob Stroller
To collapse a BOB stroller, you will need to follow these steps:
- Release the handlebar lock. This is usually located on the handlebar stem.
- Fold down the handlebar. Pull the handlebar down towards the stroller seat. Make sure to support the weight of the handlebar as you do this.
- Close the canopy. If the stroller has a canopy, close it by pulling on the straps until it is completely folded.
- Fold the seat. Pull the release lever located on the back of the stroller seat. This will allow you to fold the seat down towards the stroller frame.
- Fold the frame. Pull the release lever located on the frame of the stroller. This will allow you to fold the frame in half.
- Secure the stroller. Once the stroller is folded, there will be a latch or strap that you can use to secure it. Make sure to secure the stroller before transporting it.
People Also Ask About How To Collapse Bob Stroller
How do I collapse a BOB stroller with a car seat?
To collapse a BOB stroller with a car seat, you will need to first remove the car seat from the stroller. Once the car seat is removed, you can follow the steps above to collapse the stroller.
How do I collapse a BOB revolution stroller?
To collapse a BOB revolution stroller, you will need to follow the steps above. The BOB revolution stroller has a slightly different folding mechanism than other BOB strollers, but the steps are essentially the same.
How do I collapse a BOB Ironman stroller?
To collapse a BOB Ironman stroller, you will need to follow the steps above. The BOB Ironman stroller has a similar folding mechanism to the BOB revolution stroller, but there are a few minor differences. Make sure to consult your stroller’s user manual for specific instructions.
