5 Simple Steps to Open a Gojo Soap Dispenser

by

Open Gojo Soap Dispenser
$title$

If you’re struggling to open a Gojo soap dispenser, you’re not alone. These dispensers can be notoriously difficult to open, especially if you don’t know the trick. But don’t worry, we’re here to help! In this article, we’ll walk you through the steps on how to open a Gojo soap dispenser, so you can get back to washing your hands in no time.

First, take a look at the dispenser. You’ll notice that there is a small, black button on the top of the dispenser. This button is what you need to press to open the dispenser. However, you can’t just press the button with your finger. You need to use a tool, such as a pen or a screwdriver. Insert the tool into the small hole next to the button and press down. You should hear a click, and the dispenser will open.

Once the dispenser is open, you can refill it with soap. To do this, simply unscrew the cap on the top of the dispenser and pour in the soap. Once the dispenser is full, screw the cap back on and you’re good to go! Now that you know how to open a Gojo soap dispenser, you can keep your hands clean and germ-free. So, what are you waiting for? Get to washing!

Locate the Dispenser Key

To find the key for your Gojo soap dispenser, follow these steps:

  1. Check the Dispenser Body: Look for a small, circular hole on the side or bottom of the dispenser. This hole is usually covered by a rubber plug.
  2. Remove the Plug: Use a pen or screwdriver to gently pry out the rubber plug. Be careful not to damage the plug or the dispenser.
  3. Retrieve the Key: Inside the hole, you will find a small, plastic key. This key is used to open the dispenser’s refill cartridge.
Dispenser Type Key Location
Touch-Free Dispenser Underside of dispenser, behind battery compartment
Manual Dispenser Side of dispenser, near bottom
Wall-Mounted Dispenser Bottom of dispenser, near mounting bracket

Replace the Soap Cartridge

Step 1: Remove the empty cartridge

  • Locate the release button on the underside of the dispenser. Press and hold the release button while pulling the empty cartridge straight down.

  • Dispose of the empty cartridge properly.

Step 2: Insert the new cartridge

  • Align the new cartridge with the slot inside the dispenser and slide it into place.

  • Ensure that the cartridge is securely seated and making contact with the dispenser’s electrical connections.

Step 3: Close the dispenser

  • Press the top of the dispenser until it locks securely.

  • Wipe down the dispenser with a damp cloth to remove any soap residue.

Step 4: Test the dispenser

  • Place your hand under the sensor to dispense soap. If the dispenser does not dispense soap, check that the cartridge is properly installed and that the sensor is clean and unobstructed.

    • Step 5: Maintenance and Troubleshooting

    • Clean the sensor regularly with a damp cloth to prevent soap buildup.

    • If the dispenser stops working, check if the batteries need to be replaced.

    • If the soap is not dispensing properly, try replacing the cartridge with a new one.

    • If you have any further issues, refer to the manufacturer’s instructions or contact the manufacturer for assistance.

    Lock the Dispenser

    To maximize the longevity of Gojo soap dispensers, it’s crucial to ensure they are properly locked when not in use. This prevents accidental dispensing and reduces the risk of contamination. To lock the dispenser:

    1. Locate the Lock Lever: On most Gojo dispensers, the lock lever is a small, hinged lever located at the bottom or side of the unit.
    2. Orient the Lever: The lever should be positioned in the “horizontal” or “downward” position to indicate that the dispenser is unlocked.
    3. Flip the Lever: With the lever in the unlocked position, simply flip it up to the “vertical” or “upward” position. This will engage the lock mechanism.
    4. Test the Lock: Once the lever is flipped to the locked position, try to pump the dispenser handle. If the handle does not dispense soap, the dispenser is successfully locked.
    5. Secure the Lock: To ensure the dispenser remains locked, it’s recommended to place a small piece of tape or a key-lock device over the lock lever to prevent accidental unlocking.
    6. Maintenance: Periodically inspect the lock lever for any signs of damage or malfunction. If the lever feels loose or does not engage the lock mechanism properly, contact Gojo technical support or refer to the dispenser’s user manual for troubleshooting tips.
    1. Locate the Lock Lever 2. Orient the Lever 3. Flip the Lever
    4. Test the Lock 5. Secure the Lock 6. Maintenance

    Remove the Key

    To unlock the Gojo soap dispenser and remove the key, follow these detailed steps:

    1. Locate the keyhole on the bottom of the dispenser.
    2. Insert the key into the keyhole and turn it counterclockwise.
    3. Pull the key straight out to unlock the dispenser.
    4. Hold the dispenser with one hand and the key in the other.
    5. Push down on the top of the dispenser while pulling up on the key.
    6. The dispenser will detach from the mounting bracket, allowing you to remove the key.
    7. Store the key in a safe place for future use.

    Additional Tips

    * If the key is broken or lost, you can contact the manufacturer for a replacement.
    * Be careful not to damage the dispenser or the mounting bracket when removing the key.
    * Once the key is removed, you can refill the dispenser with soap solution.

    How To Open Gojo Soap Dispenser

    Gojo soap dispensers are used in many commercial and public settings. They are durable and easy to use, but can be difficult to open if you do not know how. Here are the steps on how to open a Gojo soap dispenser:

    1. Locate the small tab on the bottom of the dispenser.

    2. Push the tab in with your thumb.

    3. Pull the dispenser head up and away from the base.

    4. Fill the dispenser with soap.

    5. Push the dispenser head back into the base until it clicks into place.

    People Also Ask About How To Open Gojo Soap Dispenser

    Why is my Gojo soap dispenser not working?

    There are a few reasons why your Gojo soap dispenser may not be working. The most common reason is that the batteries are dead. Other reasons include:

    • The soap is too thick.

    • The dispenser is clogged.

    • The dispenser is not properly installed.

    How do I replace the batteries in my Gojo soap dispenser?

    To replace the batteries in your Gojo soap dispenser, follow these steps:

    1. Locate the battery compartment on the bottom of the dispenser.

    2. Use a screwdriver to remove the battery compartment cover.

    3. Replace the old batteries with new batteries.

    4. Put the battery compartment cover back on and tighten it with the screwdriver.

    How do I unclog my Gojo soap dispenser?

    To unclog your Gojo soap dispenser, follow these steps:

    1. Remove the dispenser head from the base.

    2. Use a pipe cleaner or a toothpick to clear the clog from the dispenser nozzle.

    3. Rinse the dispenser head with water.

    4. Reattach the dispenser head to the base.