If you’re the proud owner of a Fossil watch, you know that it’s a stylish and reliable timepiece. But even the best watches need a little TLC from time to time, and one of the most important maintenance tasks is replacing the battery. While it may seem like a daunting task, changing a Fossil watch battery is actually quite simple. With the right tools and a little patience, you can have your watch up and running again in no time.
Before you begin, it’s important to gather the necessary tools. You’ll need a small Phillips head screwdriver, a watch battery, and a soft cloth. Once you have your tools, you can start by removing the back of the watch. To do this, simply unscrew the four screws that are located around the perimeter of the back. Once the screws are removed, you can gently pry the back off of the watch. Be careful not to damage the watch or the gasket that seals the back in place.
With the back of the watch removed, you’ll now have access to the battery. The battery is typically held in place by a small metal clip. To remove the battery, simply use your screwdriver to gently pry the clip away from the battery. Once the clip is removed, you can lift the battery out of the watch. Be careful not to touch the battery with your fingers, as this can damage it. Once the old battery is removed, you can insert the new battery into the watch. Make sure that the positive (+) side of the battery is facing up. Then, use your screwdriver to gently pry the metal clip back into place. Finally, screw the back of the watch back on and you’re all set!
Identify the Battery Type
Before replacing your Fossil watch battery, it’s crucial to determine the correct battery type. This information is typically engraved on the back of the watch or inside the battery compartment. If it’s not visible, here’s a step-by-step guide to help you identify the battery type:
1. Open the Battery Compartment
Pry open the battery compartment using a small screwdriver or a key. The compartment is usually located on the back or side of the watch, and it may have a screw or a snap-on design.
Tips for Opening the Battery Compartment:
- Use the appropriate tool to avoid damaging the watch.
- If the compartment is screwed, turn the screw counterclockwise to loosen it.
- If the compartment is snapped on, gently pry it open using a thin object.
2. Examine the Battery
Once the compartment is open, remove the old battery. Carefully examine the battery for any markings or engravings that indicate its type.
Common Battery Types Used in Fossil Watches:
| Battery Type | Engraving/Markings |
|---|---|
| CR2032 | CR2032, DL2032, ECR2032 |
| CR2025 | CR2025, DL2025, ECR2025 |
| SR626SW | SR626SW, 377, 260, SR62 |
Note: If you cannot find any markings on the battery, refer to your watch’s user manual or consult a professional watchmaker.
Remove the Old Battery
To remove the old battery, follow these detailed steps:
- **Prepare your tools:** Gather a small flathead screwdriver, a pair of tweezers, and a new watch battery (CR2430 for most Fossil watches).
- **Locate the battery compartment:** On the back of the watch, you’ll see a small compartment cover held in place by screws.
- **Remove the cover screws:** Using the flathead screwdriver, carefully remove the two small screws that hold the cover.
- **Open the compartment:** Once the screws are removed, gently pry open the battery compartment cover using the tweezers or your fingernail.
- **Securely remove the old battery:** Locate the old battery, typically held in place by a small spring. Use the tweezers to gently lift the battery out. Do not use your fingers, as skin oils can damage the battery.
| Tool | Purpose |
|---|---|
| Flathead Screwdriver | Remove battery compartment screws |
| Tweezers | Remove old battery |
| New Watch Battery (CR2430) | Replace old battery |
Battery Is Dead
If your Fossil watch’s battery is dead, you’ll need to replace it. Here’s how:
- Remove the watchband by pressing the spring bars on either side of the watch case.
- Flip the watch over and remove the back cover by unscrewing the screws that hold it in place.
- Locate the battery and remove it by gently prying it out with a small screwdriver or your fingernail.
- Insert the new battery into the watch, making sure that the positive (+) and negative (-) terminals are facing the correct way.
- Replace the back cover and screw it back into place.
- Replace the watchband by sliding the spring bars back into place.
Hands Are Not Aligned
If the hands of your Fossil watch are not aligned, you can adjust them by following these steps:
- Remove the watchband as described in step 1 of the previous section.
- Flip the watch over and remove the back cover as described in step 2 of the previous section.
- Locate the small adjustment screw on the back of the watch movement and turn it gently with a small screwdriver until the hands are aligned correctly.
- Replace the back cover and screw it back into place.
- Replace the watchband.
Watch Is Not Keeping Time
If your Fossil watch is not keeping time, it may be a sign that the battery is nearing the end of its life or the movement needs to be serviced. You can try replacing the battery, but if that does not solve the problem, you should have the watch serviced by a qualified watchmaker.
Troubleshooting Common Issues
Battery Is Draining Too Quickly
There are a few things that can cause your Fossil watch’s battery to drain too quickly. These include:
- Using the backlight frequently
- Enabling Bluetooth or other wireless features
- Using the chronograph feature frequently
To extend the life of your battery, try to avoid using these features excessively.
Watch Is Not Waterproof
Fossil watches are water-resistant to different depths, but they are not waterproof. This means that you should not swim or shower with your watch on. If your watch gets wet, dry it off immediately with a soft cloth.
Watch Band Is Too Loose or Too Tight
If your Fossil watch band is too loose, it may fall off your wrist. If it is too tight, it may be uncomfortable to wear. To adjust the band, follow these steps:
- Remove the watchband as described in step 1 of the first section.
- Locate the small adjustment holes on the underside of the band and use a small screwdriver or your fingernail to move the pins into the desired holes.
- Replace the watchband.
Watch Glass Is Scratched
If the glass on your Fossil watch is scratched, you can try to remove the scratches using a soft cloth and a small amount of toothpaste. Rub the toothpaste gently in a circular motion until the scratches are removed. Rinse the watch thoroughly with water and dry it with a soft cloth.
Watch Case Is Dented or Scratched
If the case of your Fossil watch is dented or scratched, you can try to remove the dents or scratches using a soft cloth and a small amount of metal polish. Rub the polish gently in a circular motion until the dents or scratches are removed. Rinse the watch thoroughly with water and dry it with a soft cloth.
Watch Movement Is Not Working
If the movement of your Fossil watch is not working, it may be a sign that the watch needs to be serviced. You should have the watch serviced by a qualified watchmaker.
How To Change Fossil Watch Battery
Changing the battery in a Fossil watch is a relatively simple process that can be done at home with a few basic tools. Here are the steps on how to change a Fossil watch battery:
1. Gather your tools. You will need a small Phillips head screwdriver, a watch battery, and a lint-free cloth.
2. Open the watch back. Use the screwdriver to remove the four screws that hold the watch back in place. Be careful not to strip the screws.
3. Remove the old battery. Use the lint-free cloth to gently pry the old battery out of the watch. Be careful not to damage the watch movement.
4. Insert the new battery. Align the positive (+) terminal of the new battery with the positive (+) terminal on the watch movement. Gently press the battery into place.
5. Close the watch back. Replace the watch back and tighten the screws. Be sure to tighten the screws evenly so that the watch back is secure.
6. Test the watch. Once the watch back is closed, press the button to start the watch. The watch should start running immediately.
People Also Ask About How To Change Fossil Watch Battery
How often should I change the battery in my Fossil watch?
The battery in a Fossil watch should be changed every 2-3 years or when the watch starts to lose time. This will ensure that your watch continues to run accurately.
Can I change the battery in my Fossil watch myself?
Yes, you can change the battery in your Fossil watch yourself with a few basic tools. Follow the steps outlined above to change the battery safely and easily.
How much does it cost to change the battery in a Fossil watch?
The cost to change the battery in a Fossil watch will vary depending on the type of watch and the jeweler you take it to. However, you can expect to pay between $10 and $20 for a battery change.
