The 2018 Mitsubishi Outlander PHEV is a plug-in hybrid electric vehicle (PHEV) that offers the best of both worlds: the fuel efficiency of an electric car with the convenience of a gasoline engine. With its all-electric range of up to 22 miles, the Outlander PHEV can handle most daily commutes without using any gas.
When the battery is depleted, the Outlander PHEV seamlessly switches to gasoline mode, providing a total driving range of over 400 miles. Charging the Outlander PHEV is a simple process that can be done at home or at a public charging station. In this article, we will provide you with step-by-step instructions on how to charge your 2018 Mitsubishi Outlander PHEV.
Before you begin charging your Outlander PHEV, you will need to gather the following items:
Once you have gathered your materials, you can follow these steps to charge your Outlander PHEV:
Your Outlander PHEV is now ready to drive.
Connecting the Vehicle to a Charging Station
To initiate the charging process for your 2018 Mitsuibuishi Pitlander Phev, first locate a suitable charging station. Once you have identified a compatible charger, follow these comprehensive steps:
- Park your vehicle within close proximity to the charging station, ensuring that the charging port is easily accessible.
- Engage the parking brake to stabilize the vehicle during the charging process.
- Turn off the engine and remove the ignition key to prevent any electrical interference.
- Locate the charging port on the vehicle, typically situated on the front or rear fender.
- Release the charging port cover, which may require a gentle press or lever activation.
- Retrieve the charging cable from the charging station and unfold it to its full length.
- Align the charging connector with the charging port on the vehicle and insert it securely.
- Tighten the connector by rotating the locking mechanism clockwise until it is snug.
1. Park the Vehicle Properly
2. Open the Charging Port
3. Connect the Charging Cable
| Charging Station Type | Charging Cable Connector |
|---|---|
| Level 1 (120V) | J1772 Plug |
| Level 2 (240V) | J1772 Plug or Tesla Supercharger Connector |
| DC Fast Charger (150+ kW) | CHAdeMO or CCS Combo 1 Connector |
Understanding the Charging Process
The Mitsubishi Pitlander PHEV, like other plug-in hybrid vehicles, offers a unique charging process that combines both electric and gasoline power. This system allows you to enjoy the benefits of electric driving while still having the convenience of a gasoline engine for extended trips.
Charging at Home
For everyday charging, you can conveniently plug your Pitlander PHEV into a standard 120-volt outlet using the included charging cable. This process typically takes about 12 hours to fully charge the battery. For faster charging, you can install a Level 2 (240-volt) charger, which can significantly reduce charging time to around 4-6 hours. These chargers are typically installed by a licensed electrician.
| Charging Option | Charging Time |
|---|---|
| Level 1 (120-volt) | 12 hours |
| Level 2 (240-volt) | 4-6 hours |
To start charging, simply plug the charging cable into your vehicle and the other end into the charging station or outlet. The vehicle will automatically begin charging and will display the charging status on the instrument panel. Once fully charged, the vehicle will automatically stop charging to prevent overcharging.
Maximizing Charging Efficiency
To maximize the charging efficiency of your 2018 Mitsubishi Outlander PHEV, follow these tips:
1. Use the Right Charger
Use a Level 2 charger to charge your Outlander PHEV. A Level 2 charger will charge your vehicle much faster than a Level 1 charger.
2. Choose the Right Location
Choose a location to charge your Outlander PHEV where it will be protected from the elements. Avoid charging your vehicle in direct sunlight or rain.
3. Plug in When the Battery is Low
Plug in your Outlander PHEV to charge when the battery is low. This will help extend the life of your battery.
4. Precondition Your Vehicle
Preconditioning your Outlander PHEV before charging can help improve charging efficiency. Preconditioning warms up the battery, which makes it more receptive to charging. You can precondition your vehicle using the Mitsubishi Connect app or by pressing the “Precondition” button on the dashboard.
Here are some additional tips for preconditioning your Outlander PHEV:
| Action | Benefit |
|---|---|
| Precondition for at least 30 minutes before charging | This will give the battery enough time to warm up |
| Precondition when the outside temperature is below 50 degrees Fahrenheit | This will help the battery reach its optimal operating temperature |
| Precondition when the battery is low | This will help the battery accept a charge more quickly |
Charging A 2018 Mitsubishi Pitlander Phev
To charge a 2018 Mitsubishi Pitlander Phev, simply follow these steps:
1. Locate the charging port on the front driver’s side of the vehicle.
2. Open the charging port cover and insert the charging cable.
3. Connect the other end of the charging cable to a power outlet.
4. The vehicle will begin charging immediately.
5. The charging status can be monitored on the vehicle’s dashboard.
6. Once the vehicle is fully charged, remove the charging cable and close the charging port cover.
Troubleshooting Common Charging Issues
If you are experiencing issues charging your 2018 Mitsubishi Pitlander Phev, there are a few things you can check:
1. Make sure that the charging cable is properly connected to both the vehicle and the power outlet.
A loose connection can prevent the vehicle from charging properly.
2. Check the power outlet to make sure that it is working properly.
A faulty power outlet can prevent the vehicle from charging.
3. Make sure that the vehicle’s charging system is turned on.
The charging system can be turned on by pressing the “Charge” button on the vehicle’s dashboard.
4. Check the vehicle’s battery to make sure that it is not damaged.
A damaged battery can prevent the vehicle from charging properly.
5. If you are still experiencing charging issues, you may need to contact a Mitsubishi dealer for assistance.
A Mitsubishi dealer can diagnose and repair any charging problems that you may be experiencing.
| Charging Status | Dashboard Indicator |
|---|---|
| Charging | Green light |
| Charging complete | Blue light |
| Charging error | Red light |
Battery Health and Maintenance
Maintaining the health of your 2018 Mitsubishi Outlander PHEV’s battery is crucial for its longevity and optimal performance. Here are some guidelines:
Avoid Extreme Temperatures
Prolonged exposure to extreme heat or cold can degrade the battery’s performance. Park the vehicle in a shaded area or use a battery cooler to mitigate temperature fluctuations.
Regular Charging and Discharging
Regularly charge and discharge the battery to maintain its capacity. Aim to keep the battery’s charge level between 20% and 80%. Avoid fully discharging or overcharging the battery.
Use Quality Charger
Use only the OEM charger or a compatible one recommended by the manufacturer. Poor-quality chargers can damage the battery.
Battery Cooling
The Outlander PHEV is equipped with an active battery cooling system. Ensure that it operates effectively and resolve any issues promptly to prevent overheating.
Battery SOC Monitoring
Monitor the battery’s state of charge (SOC) regularly. Avoid prolonged periods of low SOC, as this can lead to battery sulfation and reduced capacity.
Scheduled Maintenance
Follow the manufacturer’s recommended maintenance schedule for the battery. This includes fluid checks, system inspections, and software updates.
Battery Replacement
The battery typically lasts for 10-12 years under normal operating conditions. When the battery needs replacement, consult with an authorized Mitsubishi dealer to ensure proper installation and avoid potential hazards.
| Battery Health Indicators | Symptoms |
|---|---|
| Reduced Capacity | Vehicle struggles to maintain charge or drives shorter distances on electric power |
| Battery Overheating | Battery warning light illuminates, vehicle enters “limp” mode |
| Battery Cell Damage | Sudden drop in performance, rapid discharge |
Charging in Extreme Weather Conditions
Subfreezing Temperatures
When the temperature drops below freezing, the chemical reactions that take place in the battery are slowed down. This can make it difficult to charge the battery fully and can reduce its capacity. To help prevent this, it is important to warm up the battery before charging. This can be done by driving the vehicle for a few minutes before plugging it in. It is also important to keep the vehicle plugged in as long as possible, even after it has reached a full charge. This will help the battery maintain its temperature and prevent it from discharging too quickly.
Extreme Heat
Extreme heat can also damage the battery. The heat can cause the battery to lose capacity and can even lead to a fire. To prevent this, it is important to keep the vehicle out of direct sunlight and to avoid charging it in very hot weather. If you must charge the vehicle in extreme heat, it is important to keep the charging time as short as possible.
Rain and Snow
Rain and snow can also affect the charging process. Water can damage the electrical connections and can cause the battery to lose power. To prevent this, it is important to keep the charging port dry and to avoid charging the vehicle in wet weather. If you must charge the vehicle in wet weather, it is important to use a waterproof charger.
Thunderstorms and Lightning
Thunderstorms and lightning can be dangerous for charging electric vehicles. The electrical surges that occur during a thunderstorm can damage the vehicle’s electrical system and can even lead to a fire. To prevent this, it is important to avoid charging the vehicle during a thunderstorm. If you are caught in a thunderstorm while charging the vehicle, it is important to unplug the vehicle and move it to a safe location.
High winds
High winds can also be dangerous for charging electric vehicles. The wind can blow debris into the charging port and can cause the charging cable to become disconnected. To prevent this, it is important to secure the charging cable and to keep the charging port free of debris.
Wind
Winds can create a problem similar to that of rain and snow. The wind can also create problems by causing the vehicle to sway, which can put stress on the charging cord. If the charging cord gets pulled out while charging, the electricity could arc and cause a fire. Always make sure that the charging cord is properly secured before leaving the vehicle to charge.
Cold weather
Cold weather can make it harder for the battery to charge. The battery is less efficient in cold weather, so it will take longer to charge. It is also important to make sure that the charging cord is properly insulated to prevent it from freezing.
Heat
Heat can also damage the battery and make it less efficient. It is important to avoid charging the battery in direct sunlight or in a hot environment. If you must charge in a hot environment, try to do so in a shaded area and use a fan to circulate air around the battery.
Estimating Charging Time and Range
1. Determine Your Battery Capacity
The charging time of your Mitsubishi Outlander PHEV will depend on the size of your battery pack. The 2018 model comes with a 12 kWh battery pack, which can store enough electricity to power the car for around 25 miles on electric-only power.
2. Choose a Charging Method
There are two main ways to charge your Outlander PHEV: using a Level 1 charger or a Level 2 charger. Level 1 chargers are typically used for home charging, while Level 2 chargers can be found at public charging stations.
3. Calculate Charging Time
The charging time for your Outlander PHEV will vary depending on the type of charger you use and the amount of electricity left in your battery. Using a Level 1 charger, it will take around 10 hours to fully charge a depleted battery. Using a Level 2 charger, it will take around 4 hours.
4. Estimate Driving Range
The driving range of your Outlander PHEV will depend on several factors, including your driving habits, the terrain you are driving on, and the outside temperature. On average, you can expect to get around 25 miles of electric-only range on a full charge.
5. Use a Range Estimator
Several online tools can help you estimate the charging time and driving range of your Outlander PHEV. These tools consider various factors such as your battery capacity, charging method, and driving habits to provide you with a more accurate estimate.
6. Charge Regularly
To maximize the lifespan of your Outlander PHEV’s battery, it is important to charge it regularly. Even if you don’t plan on driving on electric-only power, charging your car every night will help keep the battery in good condition.
7. Avoid Deep Discharging
Deep discharging your battery can damage it and reduce its lifespan. Avoid letting your battery completely discharge by charging it before it reaches 10% capacity.
8. Use the Pre-Conditioning Feature
The 2018 Outlander PHEV comes with a pre-conditioning feature that allows you to warm up the battery and cabin before driving. This can help reduce charging time and improve driving range.
9. Monitor Your Charging Status
The Outlander PHEV has a charging status indicator that will let you know when the car is fully charged. You can also use the Mitsubishi Motors Connect app to monitor your charging status remotely.
10. Consider Your Energy Consumption
The more energy you use, the less range you will get from your Outlander PHEV. To maximize your range, try to drive efficiently, avoid unnecessary acceleration, and use the car’s eco mode.
| Charging Method | Charging Time |
|---|---|
| Level 1 Charger | 10 hours |
| Level 2 Charger | 4 hours |
How to Charge a 2018 Mitsubishi Outlander PHEV
The 2018 Mitsubishi Outlander PHEV is a plug-in hybrid electric vehicle (PHEV) that can be charged using either a standard 120-volt outlet or a 240-volt charging station. Here are the steps on how to charge your 2018 Mitsubishi Outlander PHEV:
- Locate the charging port. The charging port is located on the front left side of the vehicle.
- Open the charging port door. To open the charging port door, press the button located on the inside of the door.
- Plug in the charging cable. Plug one end of the charging cable into the charging port and the other end into a 120-volt outlet or 240-volt charging station.
- Close the charging port door. Once the charging cable is plugged in, close the charging port door to secure the connection.
The charging time for a 2018 Mitsubishi Outlander PHEV will vary depending on the type of charger used. Using a standard 120-volt outlet, the charging time will be approximately 13 hours. Using a 240-volt charging station, the charging time will be approximately 5 hours.
People Also Ask
How often should I charge my 2018 Mitsubishi Outlander PHEV?
The 2018 Mitsubishi Outlander PHEV has a 12-kWh battery pack that can provide up to 22 miles of all-electric range. Depending on your driving habits, you may only need to charge your vehicle once or twice per week.
What type of charging cable do I need for my 2018 Mitsubishi Outlander PHEV?
The 2018 Mitsubishi Outlander PHEV comes with a standard J1772 charging cable. This type of cable is compatible with both 120-volt outlets and 240-volt charging stations.
Where can I find a charging station for my 2018 Mitsubishi Outlander PHEV?
There are many different places where you can find a charging station for your 2018 Mitsubishi Outlander PHEV. You can use the Mitsubishi Charge website or app to find charging stations near you.
