If you’re looking for a way to silence your iPhone’s incoming calls without completely turning off the device, you’re in luck. There are a few different ways to do this, depending on your needs. Whether you want to block all calls, only allow calls from certain contacts, or simply silence the ringer, there’s a solution for you. Here’s how to turn off incoming calls on iPhone.
One way to turn off incoming calls on iPhone is to use the Do Not Disturb feature. This feature allows you to silence all calls, texts, and other notifications for a specified period of time. To enable Do Not Disturb, open the Settings app and tap on “Do Not Disturb.” From here, you can choose to silence all calls, only allow calls from certain contacts, or allow calls from anyone. You can also choose to silence all notifications or only allow notifications from certain apps.
Another way to turn off incoming calls on iPhone is to use the Airplane Mode feature. This feature disables all wireless communication on your device, including calls, texts, and data. To enable Airplane Mode, swipe up from the bottom of the screen to open the Control Center. Then, tap on the airplane icon. Once Airplane Mode is enabled, all incoming calls will be silenced. However, you will not be able to make or receive any calls or texts until you disable Airplane Mode.
Disable Calls from Specific Contacts
If you’re looking to block incoming calls from certain contacts on your iPhone, follow these steps:
-
Launch the Phone app and navigate to the “Contacts” tab.
-
Locate the contact you want to block and tap on their name.
-
Scroll down and select the “Block this Caller” option.
-
Confirm your selection by tapping “Block Contact.”
Once you’ve blocked a contact, they’ll no longer be able to call you. You can unblock them at any time by following the same steps and selecting “Unblock this Caller.” Here’s a summary of the steps in table format:
| Step | Action |
|---|---|
| 1 | Open the Phone app and go to “Contacts.” |
| 2 | Select the contact you wish to block. |
| 3 | Scroll down and choose “Block this Caller.” |
| 4 | Confirm by tapping “Block Contact.” |
Activate Do Not Disturb Mode
Do Not Disturb mode is an incredibly useful feature that allows you to temporarily silence incoming calls, messages, and notifications. This can be especially helpful during meetings, while sleeping, or in other situations where you need to minimize distractions.
Enabling Do Not Disturb
To activate Do Not Disturb mode, follow these simple steps:
-
Open the Control Center by swiping down from the top-right corner of the screen.
-
Tap the crescent moon icon in the Control Center to turn on Do Not Disturb.
Customizing Do Not Disturb Settings
You can customize Do Not Disturb mode to suit your specific needs. To access the settings, go to **Settings > Focus > Do Not Disturb**. Here, you can adjust the following options:
| Setting | Description |
|---|---|
| Scheduled | Set specific times when Do Not Disturb should be active. |
| While Driving | Automatically enable Do Not Disturb while driving. |
| Allow Calls From | Choose which contacts or groups can still call you when Do Not Disturb is active. |
| Repeated Calls | Allow calls from the same person to come through within a certain time frame. |
Use Focus Mode to Silence Calls
Focus Mode is a feature in iOS that allows you to customize how your iPhone responds to notifications and calls based on your current activity. You can create different Focus Modes for different situations, such as work, sleep, or personal time. To use Focus Mode to silence calls:
Create a Focus Mode
-
Go to Settings > Focus.
-
Tap the “+” button in the upper-right corner.
-
Select a Focus Mode type, such as “Work” or “Personal.”
-
Customize the settings for the Focus Mode, such as the time range it will be active and the apps and people that will be allowed to notify you.
-
Tap “Done” to save the Focus Mode.
Enable Focus Mode
-
Swipe down from the top of the screen to open Control Center.
-
Tap the Focus Mode icon, which looks like a moon.
-
Select the Focus Mode you want to enable.
Customize Focus Mode for Calls
-
Go to Settings > Focus.
-
Tap on the Focus Mode you want to customize.
-
Scroll down to the “Calls” section.
-
Tap on “Allow Calls From.”
-
Select the people or groups that you want to be able to call you while Focus Mode is enabled.
-
Tap “Done” to save your changes.
Turn Off Cellular Data for Calls
To turn off cellular data for calls:
1. Open the Settings app.
2. Tap Cellular.
3. Tap Cellular Data Options.
4. Tap the switch next to Enable LTE to turn it off. This will turn off cellular data for all calls, including both incoming and outgoing calls.
5. If you want to turn off cellular data for only incoming calls, tap the switch next to Enable VoLTE to turn it off.Additional Details for Turning Off Cellular Data for Incoming Calls
When you turn off cellular data for incoming calls, you will not be able to receive calls over a cellular network. You will still be able to receive calls over Wi-Fi if you have Wi-Fi calling enabled. To enable Wi-Fi calling, open the Settings app, tap Phone, and then tap Wi-Fi Calling. Tap the switch next to Wi-Fi Calling to turn it on.
If you are traveling to a country where you do not have a cellular data plan, you can turn off cellular data for calls to avoid roaming charges. To turn off cellular data for calls while roaming, open the Settings app, tap Cellular, and then tap Roaming Options. Tap the switch next to Data Roaming to turn it off.
Setting Description Enable LTE Controls whether LTE is enabled for calls. When disabled, all calls will use 3G or lower. Enable VoLTE Controls whether VoLTE is enabled for calls. When disabled, incoming calls will use 3G or lower, while outgoing calls will use LTE. Deactivate Call Forwarding
Call forwarding allows incoming calls to be redirected to another number. To deactivate call forwarding on your iPhone, follow these steps:
- Open the Phone app.
- Tap the “Settings” tab.
- Select “Call Forwarding.”
- Tap the “Turn Off” button.
- Confirm your selection by tapping “Turn Off.”
Once you have completed these steps, all incoming calls will ring on your iPhone as usual.
If you are still experiencing issues with incoming calls being redirected, you may need to contact your carrier to disable call forwarding services on your account.
Additional Information
Setting Description Call Forwarding Enables or disables call forwarding. Forward To The number to which incoming calls will be forwarded. Always Forward Forwards all incoming calls, regardless of other settings. When Busy Forwards incoming calls when your iPhone is busy with another call. When Unanswered Forwards incoming calls when your iPhone does not answer after a specified number of rings. Enable Airplane Mode
Airplane mode is a convenient way to instantly disable all wireless communication on your iPhone. This can be useful in situations where you need to silence your phone, such as during a meeting or in a quiet area. To enable airplane mode:
- Swipe down from the top-right corner of your screen to open Control Center.
- Tap the airplane icon. The icon will turn orange, indicating that airplane mode is enabled.
- To disable airplane mode, simply tap the airplane icon again.
When airplane mode is enabled, your iPhone will not be able to send or receive calls, texts, or emails. You will also not be able to access the internet or use any other wireless features. However, you will still be able to use the following features:
- Wi-Fi
- Bluetooth
- Camera
- Music
If you need to make a call or send a text message in airplane mode, you can disable it temporarily by following the steps above. Once you have finished making your call or sending your message, be sure to re-enable airplane mode to silence your phone again.
Here is a list of common situations where you might want to use airplane mode:
- When you are in a meeting or in a quiet area and do not want to be disturbed.
- When you are on a flight and want to avoid using cellular data, which can be expensive.
- When you are in a hospital or other medical facility where electronic devices are not allowed.
- When you are experiencing interference with your iPhone’s wireless connections.
Adjust the Ringer and Alerts Volume
The ringer and alerts volume controls the loudness of incoming calls, text messages, and other notifications. You can adjust this volume using the physical volume buttons on the side of your iPhone or through the Settings app.
Using the Physical Volume Buttons
- Press the Volume Up or Volume Down button to adjust the volume while an incoming call or notification is active.
- Press and hold the Volume Down button to quickly mute all incoming calls and notifications.
Using the Settings App
- Open the Settings app.
- Tap Sounds & Haptics.
- Use the Ringer and Alerts slider to adjust the volume.
Additional Settings
Setting Description Change with Buttons Enables or disables volume adjustment using the physical volume buttons. Silent Mode Silences all incoming calls, notifications, and other sounds when activated. Vibrate on Ring Makes the iPhone vibrate when an incoming call or notification is received, even if the ringer is set to off. Check the Phone’s Settings for Call Options
To disable incoming calls on your iPhone, you can adjust the settings within the Phone app. Here’s how to do it:
1. Open the Phone App
Launch the Phone app on your iPhone’s home screen.
2. Access the Settings
Tap the “Settings” button located at the bottom right corner of the Phone app’s main interface.
3. Navigate to Calls
In the Settings menu, scroll down and tap on “Calls”.
4. Disable Call Blocking & Identification
Under the “Calls” section, locate the “Call Blocking & Identification” option and toggle it off.
5. Turn Off Silence Unknown Callers
Below the “Call Blocking & Identification” option, you’ll find the “Silence Unknown Callers” feature. Toggle this off as well to allow calls from all numbers.
6. Set Forwarding Options
If you have call forwarding enabled, it may be preventing incoming calls from reaching you. Tap on “Call Forwarding” and ensure it’s turned off.
7. Disable Do Not Disturb
Do Not Disturb mode silences incoming calls. Tap on “Do Not Disturb” and ensure it’s turned off or set to “Manual” mode.
8. Reset Network Settings
If you’ve tried all the above steps and incoming calls are still not working, consider resetting your network settings. This will erase all Wi-Fi and cellular network settings, including call barring configurations.
To reset network settings, go to “Settings” > “General” > “Transfer or Reset iPhone” > “Reset” > “Reset Network Settings”.
Note that resetting network settings will also remove any saved Wi-Fi passwords and Bluetooth connections.
How To Turn Off Incoming Calls On Iphone
1. Open the “Settings” app on your iPhone.
2. Tap on the “Phone” option.
3. Tap on the “Call Blocking & Identification” option.
4. Tap on the “Block Calls From” option.
5. Tap on the “Add Number” option.
6. Enter the phone number of the person you want to block.
7. Tap on the “Block Contact” button.Contact Your Carrier for Support
If you are unable to block calls from specific numbers using the above steps, you may need to contact your carrier for support. Your carrier may be able to provide you with additional options for blocking calls.
Here are some of the ways that your carrier may be able to help you:
Carrier Support Options AT&T – Call AT&T customer service at 1-800-331-0500.
– Visit the AT&T website at https://www.att.com/support/.Verizon – Call Verizon customer service at 1-800-922-0204.
– Visit the Verizon website at https://www.verizon.com/support/.T-Mobile – Call T-Mobile customer service at 1-877-746-0909.
– Visit the T-Mobile website at https://www.t-mobile.com/support/.Sprint – Call Sprint customer service at 1-888-211-4727.
– Visit the Sprint website at https://www.sprint.com/support/.Reset Network Settings to Default
Resetting your network settings to their default values can resolve issues related to incoming calls. This operation will reset all Wi-Fi networks, Bluetooth connections, and cellular settings. It’s crucial to note that any saved Wi-Fi passwords will be erased and need to be re-entered after the reset.
To reset your network settings:
1. Open the Settings app on your iPhone.
2. Scroll down and select “General.”
3. Scroll down and select “Transfer or Reset iPhone.”
4. Select “Reset.”
5. Choose “Reset Network Settings.”
6. Enter your passcode if prompted.
7. Confirm the reset by tapping “Reset Network Settings” again.Once the reset is complete, your iPhone will restart automatically. Any saved Wi-Fi passwords will need to be re-entered when you reconnect to a Wi-Fi network.
Potential Benefits of Resetting Network Settings:
Benefit Improved cellular connectivity Resolved Wi-Fi issues Enhanced Bluetooth connectivity Important Note: Resetting network settings will not affect any of your personal data, such as photos, contacts, or messages. However, it’s recommended to back up your device before performing this reset to ensure data preservation.
How to Turn Off Incoming Calls on iPhone
If you need to silence your iPhone to avoid distractions or interruptions, you can turn off incoming calls. Here’s how:
-
Open the “Settings” app on your iPhone.
-
Tap “Phone.”
-
Tap the “Incoming Calls” section.
-
Choose one of the following options:
-
Always: Allows calls from all contacts.
-
Contacts Only: Only allows calls from contacts saved in your address book.
-
Never: Blocks all incoming calls.
-
-
Tap the “Back” button to save your changes.
People Also Ask
Can I turn off calls temporarily on iPhone?
Yes, you can use Do Not Disturb mode to silence incoming calls for a specified period or until you manually turn it off. To enable Do Not Disturb, open the Control Center and tap the moon icon.
How do I block specific numbers from calling my iPhone?
To block specific numbers from calling your iPhone, follow these steps:
-
Open the “Phone” app.
-
Tap the “Recents” tab.
-
Find the contact you want to block and tap the “i” icon next to their name.
-
Scroll down and tap “Block this Caller.”
