How To Reset Tire Stress Gentle Honda Accord
The Tire Stress Monitoring System (TPMS) gentle in your Honda Accord is a helpful security function that alerts you to low tire strain. Low tire strain can scale back your automobile’s dealing with and braking efficiency, and may even result in a flat tire. If the TPMS gentle comes on, it is vital to verify your tire strain as quickly as doable, as indicated on the automobile’s door jamb. If the tire strain is low, inflate the tires to the right strain and the sunshine ought to flip off robotically after a couple of minutes of driving. Nevertheless, if the sunshine stays on after you’ve got inflated the tires, you could must reset the TPMS system.
Featured Picture
[Image of a Honda Accord with the TPMS light on]
Resetting the TPMS System
To reset the TPMS system in your Honda Accord, you will have to make use of the TPMS reset button positioned underneath the dashboard. The placement of the button might fluctuate relying on the yr of your Accord, so seek the advice of your proprietor’s handbook for particular directions. After you have discovered the button, press and maintain it for about 5 seconds. The TPMS gentle will flash a number of occasions, after which flip off. This means that the system has been reset.
Driving After Resetting the TPMS System
After you may have reset the TPMS system, you will have to drive for a brief time period (about 10 minutes) for the system to relearn the tire pressures. Throughout this time, the TPMS gentle might flash intermittently. As soon as the system has relearned the tire pressures, the sunshine ought to flip off and keep off. Please check with your Honda Accord’s proprietor’s handbook for extra details about the TPMS system and its operation. Security ought to all the time be a precedence when driving.
Choosing the Tire Stress Reset Possibility
To entry the tire strain reset possibility, observe these steps:
- Activate the ignition, however don’t begin the engine.
- Navigate to the settings menu utilizing the steering wheel controls.
- Scroll all the way down to the “Automobile” or “Upkeep” part.
- Choose the “Tire Stress” or “TPMS” possibility.
- Select the “Reset” or “Initialize” possibility.
- Relying on the yr and trim stage of your Accord, the precise wording and site of the reset possibility might fluctuate barely.
- Consult with your proprietor’s handbook or seek the advice of with a Honda dealership for particular directions to your explicit mannequin.
- Affirm the reset by choosing “Sure” or “OK.”
- The tire strain gentle ought to now flip off.
Extra Notes:
- It could take a couple of minutes for the tire strain monitoring system (TPMS) to recalibrate and the sunshine to show off.
- If the tire strain gentle doesn’t flip off after resetting, it might point out a persistent tire strain subject. On this case, verify the tire strain of all 4 tires utilizing a tire strain gauge.
- Recurrently checking and sustaining correct tire strain is crucial for optimum automobile efficiency, dealing with, and security.
Sustaining Optimum Tire Stress
Sustaining optimum tire strain is essential for making certain protected and environment friendly driving. Observe these steps to reset the tire strain gentle in your Honda Accord:
1. Test and Alter Tire Stress
Use a tire strain gauge to verify the strain in every tire. Inflate the tires to the really useful strain laid out in your automobile’s proprietor’s handbook.
2. Activate the Ignition
Activate the ignition however don’t begin the engine.
3. Enter the TPMS Reset Mode
Press and maintain the TPMS reset button positioned close to the steering wheel. The button is normally marked with a picture of a automobile or a tire.
4. Launch the Button and Press It Once more
Launch the reset button as soon as the tire strain gentle begins flashing. Press and maintain it once more for just a few extra seconds.
5. Observe the Tire Stress Gentle
The tire strain gentle will proceed to flash. The flashing signifies that the system is resetting.
6. Drive for a Quick Distance
As soon as the tire strain gentle stops flashing, drive for a brief distance to permit the TPMS system to relearn the brand new tire pressures.
7. Flip Off the Ignition
Park your Honda Accord and switch off the ignition.
8. Restart the Engine
Restart the engine and verify if the tire strain gentle remains to be illuminated. If the sunshine is off, the reset is full.
9. Notice: For Fashions with Oblique TPMS (2016 and Newer)
For fashions with oblique TPMS (2016 and newer), the reset process is barely completely different.
After performing steps 1-3, observe these further steps:
10. Drive Roughly 20 Minutes
Drive for not less than 20 minutes at speeds of 35 mph or greater to permit the TPMS system to relearn the tire pressures.
| Some Factors To Bear in mind |
|---|
| – Be sure that the tire strain gentle is illuminated earlier than performing the reset. |
| – If the tire strain gentle persists after resetting, seek the advice of your Honda seller for help. |
| – Recurrently verify and alter tire strain to take care of optimum efficiency and security. |
How To Reset Tire Stress Gentle Honda Accord
The tire strain gentle in your Honda Accord is designed to provide you with a warning to a possible drawback together with your tires. If the sunshine is on, it implies that a number of of your tires is underinflated. This may be harmful, as it may well result in diminished traction, elevated put on in your tires, and even a blowout.
To reset the tire strain gentle in your Honda Accord, you will have to:
- Flip the ignition to the “ON” place.
- Navigate to the “Settings” menu on the dashboard.
- Choose the “Automobile” possibility.
- Scroll down and choose the “Tire Stress” possibility.
- Press the “Reset” button.
Individuals additionally ask about How To Reset Tire Stress Gentle Honda Accord
verify tire strain?
To verify tire strain, you will have a tire strain gauge. Insert the gauge into the valve stem on the tire and press down. The gauge will show the tire strain in kilos per sq. inch (psi). The really useful tire strain to your Honda Accord might be discovered on the sticker inside the driving force’s door jamb.
add air to a tire?
So as to add air to a tire, you will have an air compressor. Join the air compressor to the valve stem on the tire and switch it on. The air compressor will add air to the tire till it reaches the specified strain. Make sure to verify the tire strain with a tire strain gauge to make sure that it’s on the appropriate stage.
repair a flat tire?
To repair a flat tire, you will have a spare tire, a jack, and a lug wrench. First, use the jack to boost the flat tire off the bottom. Then, use the lug wrench to loosen the lug nuts on the flat tire. Take away the lug nuts and the flat tire, after which mount the spare tire on the wheelbase. Tighten the lug nuts on the spare tire, after which decrease the jack to the bottom. Lastly, verify the tire strain within the spare tire and alter it to the really useful stage.
