The right way to Safely Take away the Again Seat of a 2013 Buick Lacrosse
The 2013 Buick Lacrosse is a trendy and cozy sedan, however there could come a time when it’s essential to take away the again seat for cleansing, repairs, or to move massive objects. The method is comparatively easy and may be accomplished with a number of easy instruments. On this article, we’ll information you thru the steps on how one can safely take away the again seat of your 2013 Buick Lacrosse.
Earlier than you start, collect the required instruments: a Phillips head screwdriver, a flat head screwdriver, and a socket wrench set. You may additionally need to put on gloves to guard your palms. Upon getting your instruments and security gear prepared, you can begin the elimination course of. First, find the 2 youngster seat anchors on the base of the seat cushion. Use the Phillips head screwdriver to take away the bolts that safe the anchors. Subsequent, use the flat head screwdriver to pry up the plastic trim items that cowl the seat bolts. As soon as the trim items are eliminated, you will note 4 bolts that maintain the seat cushion in place. Use the socket wrench to take away these bolts.
Now, carry the seat cushion up and over the seat again. Watch out to not harm the seat cloth as you do that. As soon as the seat cushion is eliminated, you will note two extra bolts that safe the seat again to the ground. Use the socket wrench to take away these bolts, after which fastidiously carry the seat again out of the car. The again seat of your 2013 Buick Lacrosse is now eliminated. Now you can clear it, make repairs, or transport massive objects as wanted. When you’re completed, merely reverse the steps to reinstall the seat.
Detaching the Trunk Lid
To start the method of detaching the trunk lid, you will want to assemble a number of important instruments: a Phillips head screwdriver, a flathead screwdriver, a socket wrench with a 10mm socket, and a trim elimination software. Upon getting your instruments assembled, observe these detailed steps to securely and successfully take away the trunk lid:
1. Unlocking and Opening the Trunk
Begin by making certain that your Buick Lacrosse is parked in a protected and steady location. Shift the car into park and interact the parking brake to forestall any unintentional motion. Find the trunk launch lever contained in the car and pull it to unlatch the trunk. As soon as the trunk is unlocked, carry the lid barely to create a small hole.
Insert the flathead screwdriver into the hole between the trunk lid and the physique of the automotive. Gently pry the lid upwards whereas concurrently pulling the discharge lever once more. The trunk lid ought to now be totally open, offering you with entry to the inside.
| Phillips head screwdriver | Loosen the screws holding the taillights in place |
|---|---|
| Flathead screwdriver | Pry open the trunk lid |
| Socket wrench with 10mm socket | Take away the bolts securing the trunk lid to the hinges |
| Trim elimination software | Rigorously detach the trim items across the trunk lid |
Eradicating the Trunk Trim
To start eradicating the trunk trim, entry the trunk and take away the plastic trim items close to the taillights. Use a flathead screwdriver to detach the fasteners holding them in place.
Subsequent, proceed to take away the rear seat. Fold down the seatback and find the 2 bolts securing it to the ground. Take away these bolts and thoroughly carry out the seat. This gives entry to the trunk trim’s higher mounting factors.
Now, deal with the decrease mounting factors. Place your palms beneath the trunk trim and apply mild strain upwards to detach its clips from the retaining clips on the physique. Work your approach across the perimeter of the trim, fastidiously releasing all of the clips. You could want a trim elimination software or a plastic pry bar to help on this course of. As soon as all of the clips are indifferent, fastidiously carry the trunk trim upwards and take away it from the car.
Disconnecting the Trunk Mild Wiring
To disconnect the trunk mild wiring, observe these steps:
- Find the trunk mild meeting. It’s situated on the underside of the trunk lid.
- Disconnect {the electrical} connector from the trunk mild meeting.
- Take away the 2 screws that safe the trunk mild meeting to the trunk lid. Rigorously take away the trunk mild meeting. When eradicating the trunk mild meeting, watch out to not harm the wiring or the sunshine meeting itself.
| Step | Description |
|---|---|
| 1 | Find the trunk mild meeting. It’s situated on the underside of the trunk lid. |
| 2 | Disconnect {the electrical} connector from the trunk mild meeting. |
| 3 | Take away the 2 screws that safe the trunk mild meeting to the trunk lid. Rigorously take away the trunk mild meeting. When eradicating the trunk mild meeting, watch out to not harm the wiring or the sunshine meeting itself. |
Eradicating the Quarter Panel Trim
Earlier than you may take away the again of the Buick Lacrosse 2013, it’s essential to take away the quarter panel trim. Here is how one can do it:
- Take away the 2 screws on the high of the quarter panel, after which take away the trim panel.
- Find the 2 screws on the backside of the quarter panel and take away them.
- Grip the quarter panel trim and gently pull it away from the physique of the automotive.
- Disconnect {the electrical} connector for the license plate lights, which is hooked up to one of many trim clips.
**Trim Clip Sort** **Removing Device** Push-Sort Trim Clip Removing Device Screw-Sort Phillips Screwdriver Spring-Sort Flathead Screwdriver **Be aware:** Watch out to not harm the paint on the automotive when eradicating the trim panel.
Unbolting the Rear Bumper
To unbolt the rear bumper of a 2013 Buick Lacrosse, you will have a number of fundamental instruments, together with a socket wrench, a Phillips head screwdriver, and a flathead screwdriver. Start by disconnecting the unfavourable terminal of the battery to keep away from electrical shocks. Then, take away the 4 bolts that maintain the bumper in place, two on all sides. Subsequent, use the Phillips head screwdriver to take away the 4 screws that maintain the bumper to the trunk lid. Lastly, use the flathead screwdriver to pry the bumper free from the physique of the automotive. As soon as the bumper is free, you may fastidiously take away it from the automotive.
Listed below are the steps in additional element:
Step Description 1. Disconnect the unfavourable terminal of the battery. 2. Take away the 4 bolts that maintain the bumper in place, two on all sides. 3. Use the Phillips head screwdriver to take away the 4 screws that maintain the bumper to the trunk lid. 4. Use the flathead screwdriver to pry the bumper free from the physique of the automotive. 5. Rigorously take away the bumper from the automotive. As soon as the bumper is eliminated, you may entry the again of the automotive for repairs or upkeep.
Separating the Quarter Panel from the Bumper
To separate the quarter panel from the bumper, you will have to observe these steps:
- Find the screws alongside the underside of the bumper that connect it to the quarter panel. These screws are usually Torx head screws.
- Take away the screws utilizing a Torx driver.
- Gently pull the bumper away from the quarter panel, beginning at one nook and dealing your approach round.
- As soon as the bumper is separated from the quarter panel, you may disconnect {the electrical} connectors for the taillights and license plate lights.
- Take away the flip sign lamps by urgent the tab on the again of the lamp and pulling the lamp out.
- Now it’s essential to take away the rear bumper reinforcement. The reinforcement is hooked up to the quarter panels with bolts. Find the bolts and take away them utilizing a wrench or socket. As soon as the bolts are eliminated, you may pull the reinforcement away from the quarter panels.
- With the reinforcement eliminated, now you can entry the nuts that connect the quarter panel to the physique of the automotive. Take away the nuts utilizing a wrench or socket.
- As soon as the nuts are eliminated, you may fastidiously pull the quarter panel away from the physique of the automotive.
Screw Measurement Amount Location T25 Torx 4 Backside of the bumper Disengaging the Quarter Panel from the Physique
7. Unplug the Tail Mild Meeting
Find the tail mild meeting on the rear of the quarter panel. It’s usually secured by a number of bolts or screws. Take away the bolts or screws to launch the meeting.
As soon as the meeting is free, fastidiously pull it away from the quarter panel. Be cautious to not harm the wiring or the meeting itself.
Disconnect {the electrical} connector that powers the tail mild meeting. This connector is often situated behind the meeting or close to the sting of the quarter panel.
Step Description 1 Find the tail mild meeting on the rear of the quarter panel. 2 Take away the bolts or screws securing the meeting. 3 Rigorously pull the meeting away from the quarter panel. 4 Disconnect {the electrical} connector that powers the meeting. Eradicating the Again Panel
To take away the again panel of a 2013 Buick Lacrosse, observe these steps:
1. Open the Trunk
Find the trunk launch lever contained in the car and pull it to open the trunk.
2. Take away the Facet Panels
On all sides of the trunk, find the plastic facet panels that cowl the taillights. Use a trim elimination software or a flat-head screwdriver to softly pry the panels off.
3. Disconnect the Electrical Connectors
As soon as the facet panels are eliminated, you will note {the electrical} connectors for the taillights. Disconnect these connectors by urgent the tabs on the facet and pulling them aside.
4. Take away the Taillights
Find the 2 bolts that maintain every taillight in place. Use a socket wrench or a field wrench to take away the bolts. As soon as the bolts are eliminated, fastidiously pull the taillights straight out of their sockets.
5. Take away the Trunk Lid Garnish
Within the middle of the trunk lid, find the plastic garnish that covers the license plate mild. This garnish is held in place by two clips. Use a flat-head screwdriver or a trim elimination software to fastidiously pry the garnish off.
6. Take away the License Plate Mild
As soon as the trunk lid garnish is eliminated, you will note the license plate mild. To take away the sunshine, use a flat-head screwdriver or a trim elimination software to softly pry the sunshine out of its housing.
7. Take away the Trunk Lid Help Struts
On all sides of the trunk lid, find the 2 assist struts that maintain the lid open. Use a socket wrench or a field wrench to take away the bolts that maintain the struts in place. As soon as the bolts are eliminated, carry the trunk lid barely and take away the struts.
8. Take away the Trunk Lid Weatherstripping
Across the perimeter of the trunk lid, find the rubber weatherstripping. This weatherstripping is held in place by a collection of clips. Use a flat-head screwdriver or a trim elimination software to fastidiously pry the weatherstripping off.
9. Take away the Trunk Lid
As soon as the weatherstripping is eliminated, the trunk lid is now free to be eliminated. Raise the trunk lid barely and thoroughly pull it straight up and off the car.
10. Disconnect the Backup Digital camera
In case your 2013 Buick Lacrosse is provided with a backup digicam, you will have to disconnect it earlier than eradicating the again panel. The backup digicam is situated within the middle of the again panel. To disconnect it, use a flat-head screwdriver or a trim elimination software to fastidiously pry the digicam out of its housing. Then, disconnect {the electrical} connector from the again of the digicam.
Step Description 1 Take away the facet panels 2 Disconnect {the electrical} connectors 3 Take away the taillights 4 Take away the trunk lid garnish 5 Take away the license plate mild 6 Take away the trunk lid assist struts 7 Take away the trunk lid weatherstripping 8 Take away the trunk lid 9 Disconnect the backup digicam (if geared up) How To Take Off The Again Of Buick Lacrosse 2013
Instruments Wanted:
- 10mm socket wrench
- Flathead screwdriver
Directions:
- Open the trunk.
- Find the 2 10mm bolts on the highest of the trunk lid.
- Take away the bolts.
- Find the 2 plastic clips on the underside of the trunk lid.
- Use a flathead screwdriver to pry the clips open.
- Raise the trunk lid off of the automotive.
Folks Additionally Ask About How To Take Off The Again Of Buick Lacrosse 2013
How do I take away the again seat of a 2013 Buick Lacrosse?
Instruments Wanted:
- 13mm socket wrench
- Flathead screwdriver
Directions:
- Fold down the again seat.
- Take away the 2 13mm bolts on the underside of the seat.
- Find the 2 plastic clips on the facet of the seat.
- Use a flathead screwdriver to pry the clips open.
- Raise the seat up and out of the automotive.
How do I take away the rear bumper of a 2013 Buick Lacrosse?
Instruments Wanted:
- 10mm socket wrench
- 15mm socket wrench
- Phillips head screwdriver
Directions:
- Open the trunk.
- Take away the 2 10mm bolts on the highest of the rear bumper.
- Take away the 2 15mm bolts on the underside of the rear bumper.
- Find the 2 Phillips head screws on all sides of the rear bumper.
- Take away the screws.
- Rigorously pull the rear bumper off of the automotive.
