The Nintendo Swap Professional Controller is a well-liked alternative for players who need a premium gaming expertise on their PC. It is comfy to carry, has an incredible button structure, and options movement controls and HD rumble. If you happen to’re trying to join your Swap Professional Controller to your PC, there are a number of alternative ways to do it. On this article, we’ll present you the best way to join your Swap Professional Controller to your PC utilizing a wired connection, a Bluetooth connection, or a USB adapter.
Earlier than you start, you will must ensure that your PC has Bluetooth capabilities. In case your PC does not have Bluetooth, you should buy a USB Bluetooth adapter. Upon getting a Bluetooth adapter, you may observe these steps to attach your Swap Professional Controller to your PC:
1. Flip in your Swap Professional Controller by urgent the Residence button.
2. Open the Bluetooth settings in your PC.
3. Click on on the “Add a tool” button.
4. Choose the “Nintendo Swap Professional Controller” from the listing of obtainable units.
5. Click on on the “Join” button.
6. As soon as the connection is established, you’ll use your Swap Professional Controller to play video games in your PC.
Wired Connection by way of USB Cable
Connecting by way of USB Cable
Connecting your Nintendo Swap Professional Controller to your PC by way of a USB cable is a dependable and easy methodology. Listed below are the steps you might want to observe:
Step 1: Set up the Newest Drivers
Earlier than connecting your controller, guarantee you might have the most recent drivers put in to your pc. You’ll be able to obtain these drivers from the official Nintendo web site. As soon as the drivers are put in, proceed to the subsequent step.
Step 2: Join the Controller
Take a USB-C cable and plug it into the USB-C port on the highest of the Professional Controller. Join the opposite finish of the cable to an out there USB port in your PC. Your pc ought to robotically acknowledge the controller.
Step 3: Configure the Controller
As soon as the controller is linked, chances are you’ll must configure it in your pc’s settings. Open the Management Panel in your PC and navigate to the “Gadgets and Printers” part. Find the Professional Controller within the listing of units and right-click on it. Choose “Properties” after which navigate to the “Settings” tab. Right here, you may alter the button mapping and different settings.
Desk: Troubleshooting USB Connection Points
| Concern | Resolution |
|---|---|
| Controller not detected | Test if the USB cable is correctly linked and the drivers are updated. |
| Buttons not working appropriately | Open the Management Panel and configure the controller settings. |
| Controller disconnecting randomly | Use a unique USB cable or port. Test for any free connections. |
Wi-fi Connection by way of Bluetooth
1. Allow Bluetooth in your PC
Earlier than you may join your Swap Professional Controller to your PC by way of Bluetooth, you might want to ensure that Bluetooth is enabled in your PC. To do that, open the Settings app and click on on “Bluetooth & units”. Then, ensure that the “Bluetooth” toggle is turned on.
2. Put the Swap Professional Controller into pairing mode
As soon as Bluetooth is enabled in your PC, you may put the Swap Professional Controller into pairing mode. To do that, press and maintain the “Sync” button on the highest of the controller for about 5 seconds. The LED lights on the controller will begin to flash quickly when it’s in pairing mode.
Here’s a step-by-step information on the best way to join your Swap Professional Controller to your PC by way of Bluetooth:
| Step | Description |
|---|---|
| 1 | Open the Settings app in your PC and click on on “Bluetooth & units”. |
| 2 | Ensure that the “Bluetooth” toggle is turned on. |
| 3 | Press and maintain the “Sync” button on the highest of the Swap Professional Controller for about 5 seconds. |
| 4 | The LED lights on the controller will begin to flash quickly when it’s in pairing mode. |
| 5 | Click on on the “Add a tool” button within the Settings app. |
| 6 | Choose “Bluetooth” from the listing of choices. |
| 7 | Your PC will begin trying to find out there Bluetooth units. |
| 8 | As soon as your PC finds the Swap Professional Controller, click on on it to attach. |
| 9 | The LED lights on the controller will cease flashing quickly and switch strong when it’s linked. |
Putting in Needed Drivers
To attach your Swap Professional Controller to your PC, you will want to put in the mandatory drivers. These drivers can be found free of charge from Nintendo’s web site. As soon as you’ve got downloaded the drivers, open the file and observe the on-screen directions to put in them.
As soon as the drivers are put in, it’s best to be capable to join your Swap Professional Controller to your PC utilizing a USB cable. If you happen to’re having bother connecting the controller, attempt the next troubleshooting ideas:
- Ensure that your PC is operating Home windows 10 or later.
- Ensure that the USB cable is securely linked to each your PC and the controller.
- Strive restarting your PC.
If you happen to’re nonetheless having bother connecting the controller, you may contact Nintendo’s buyer assist for assist.
Configuring the Controller in Steam
To additional customise your Swap Professional Controller’s performance on PC, you should utilize Steam’s settings. Observe these steps for an in depth configuration course of:
- Open Steam: Launch the Steam consumer in your pc.
- Go to Settings: Click on on the “Steam” menu within the top-left nook and choose “Settings.”
- Navigate to Controller Settings: Within the Settings window, go to the “Controller” tab.
- Configure Inputs: Beneath “Common Controller Settings,” you may alter the controller’s button mappings, set off sensitivity, and different enter settings.
Setting Customization Choices Button Mappings Reassign buttons to carry out totally different actions. Set off Sensitivity Modify the sensitivity of the triggers for optimum management. Vibration Disable or alter the depth of controller vibration. Gyro Controls Allow movement controls for added precision in video games. - Create Customized Profiles: If you wish to swap between totally different controller configurations, you may create customized profiles. Click on on the “Create New Profile” button and provides it a descriptive title. You’ll be able to then alter the settings for every profile accordingly.
- Apply Adjustments: When you’re happy together with your configuration, click on on the “Apply” button to save lots of your adjustments.
Utilizing Third-Occasion Software program
For customers preferring a extra complete and customizable setup, there are a number of third-party functions that provide superior options and assist for a wider vary of controllers. This is the best way to join a Swap Professional Controller to PC utilizing third-party software program:
1. Obtain and Set up a Third-Occasion Software program
There are a number of third-party software program choices out there, reminiscent of XInput Wrapper, JoyToKey, and DS4Windows. Select a program that’s suitable together with your working system and meets your particular wants.
2. Open the Third-Occasion Software program
As soon as the software program is put in, launch it and observe the on-screen directions to configure your Swap Professional Controller. Sometimes, you will want to pick out your controller from the listing of obtainable units and assign the buttons as desired.
3. Join Your Swap Professional Controller Through Bluetooth or USB
Whether or not you select to attach your controller wirelessly by way of Bluetooth or with a USB cable, be certain that your PC has the suitable drivers put in. As soon as linked, the third-party software program will acknowledge your controller and assist you to customise its settings.
4. Configure the Controller Settings
The settings out there in third-party software program fluctuate relying on the precise program you select. Sometimes, you may alter the button mapping, create macros, alter sensitivity, and modify different superior choices to optimize your gameplay expertise.
5. Troubleshooting Ideas
If you happen to encounter points when connecting your Swap Professional Controller to PC utilizing third-party software program, attempt the next troubleshooting steps:
| Concern | Resolution |
|---|---|
| Controller will not be acknowledged | Guarantee your controller is correctly linked and that the proper drivers are put in. |
| Flawed button mapping | Test the button mapping settings within the third-party software program and make crucial changes. |
| Lag or enter delay | Strive utilizing a wired USB connection or examine for any background processes which may be consuming sources. |
The right way to Join a Swap Professional Controller to PC
Connecting a Swap Professional Controller to your PC is a straightforward course of. This is a step-by-step information:
- Be sure your Swap Professional Controller is totally charged.
- Join your Swap Professional Controller to your PC utilizing a USB cable.
- Your PC ought to robotically detect the controller and set up any crucial drivers.
- As soon as the drivers are put in, you may open your most well-liked sport and begin taking part in.
Troubleshooting Frequent Points
The controller will not be connecting to my PC.
In case your controller will not be connecting to your PC, attempt the next steps:
- Ensure that the USB cable is correctly linked to each your controller and your PC.
- Strive utilizing a unique USB cable.
- Restart your PC.
- Replace your PC’s working system.
- Replace the drivers to your Swap Professional Controller.
- Contact Nintendo assist for help.
The controller will not be working correctly.
In case your controller will not be working correctly, attempt the next steps:
- Ensure that the controller is totally charged.
- Strive resetting the controller by holding down the Sync button for five seconds.
- Replace the firmware to your Swap Professional Controller.
- Contact Nintendo assist for help.
The controller will not be acknowledged by my sport.
In case your controller will not be acknowledged by your sport, attempt the next steps:
- Ensure that your sport is updated.
- Strive restarting your sport.
- Replace the drivers to your Swap Professional Controller.
- Contact the sport developer for assist.
Optimizing Efficiency
To additional improve your gaming expertise, take into account the next ideas:
Modify Sensitivity and Rumble Settings
Customise the controller’s sensitivity and rumble depth to fit your preferences. This lets you fine-tune the management responsiveness and bodily suggestions throughout gameplay.
Test Battery Degree
Guarantee your controller is totally charged earlier than taking part in. A low battery can lead to connection drops or efficiency points.
Replace Firmware
Preserve your controller’s firmware updated by connecting it to the Swap console and checking for out there updates. Firmware updates usually embody efficiency enhancements and bug fixes.
Change Batteries
If you happen to’re utilizing rechargeable batteries, make certain they’re recent. Weak or previous batteries can affect controller efficiency.
Join by way of Wired Connection
For the bottom latency and most secure connection, join your controller to your PC utilizing a wired USB cable as an alternative of Bluetooth.
Cut back Background Purposes
Shut pointless background functions which may be consuming system sources and probably affecting controller efficiency.
Disable Energy Saving Options
Disable any power-saving options in your working system or in your PC, as these might restrict the controller’s efficiency. Energy-saving modes can scale back the frequency of knowledge switch and updates, leading to potential lag.
Connecting A number of Controllers
If you wish to join a number of Swap Professional Controllers to your PC, you will want to make use of a USB hub. A USB hub is a tool that lets you join a number of USB units to a single USB port in your pc. Upon getting a USB hub, you may merely plug your Swap Professional Controllers into the hub and they are going to be acknowledged by your PC.
Here’s a desk summarizing the steps on the best way to join a number of Swap Professional Controllers to your PC:
| Step | Description |
|---|---|
| 1 | Join a USB hub to your PC. |
| 2 | Plug your Swap Professional Controllers into the USB hub. |
| 3 | Your PC will robotically acknowledge the controllers. |
Upon getting linked your controllers, you should utilize them to play video games in your PC. You can too use the controllers to navigate the Home windows working system.
Customizing Controls
As soon as your Swap Professional Controller is linked to your PC, you may customise the controls to your liking. This may be finished via the Steam Enter settings.
To customise the controls, open Steam and go to the “Settings” menu. Then, choose the “Controller” tab and click on on the “Swap Professional Controller” possibility. From right here, you may remap any of the buttons or triggers on the controller. You can too alter the sensitivity of the sticks and triggers.
Along with remapping the buttons, it’s also possible to create customized configurations for various video games. This lets you have totally different management schemes for various video games, relying in your preferences.
To create a customized configuration, click on on the “Add New Configuration” button. Then, choose the sport you need to create a configuration for from the drop-down menu. You’ll be able to then remap the buttons and triggers for that particular sport. If you wish to be extra organized, you may rename the configuration by clicking on the pencil icon subsequent to the configuration title.
Upon getting created a customized configuration, you may swap between it and the default configuration by clicking on the “Swap Config” button. You can too delete a customized configuration by clicking on the “Delete” button.
Here’s a desk summarizing the steps on the best way to customise the controls in your Swap Professional Controller:
| Step | Description |
|---|---|
| 1 | Open Steam and go to the “Settings” menu. |
| 2 | Choose the “Controller” tab and click on on the “Swap Professional Controller” possibility. |
| 3 | Remap any of the buttons or triggers on the controller. |
| 4 | Modify the sensitivity of the sticks and triggers. |
| 5 | Create customized configurations for various video games. |
| 6 | Swap between totally different configurations by clicking on the “Swap Config” button. |
| 7 | Delete a customized configuration by clicking on the “Delete” button. |
Utilizing the Controller with Different Video games
The Swap Professional Controller is suitable with a variety of video games on PC, together with well-liked titles like Rocket League, Fortnite, and Apex Legends. To make use of the controller with these video games, you will must observe these steps:
1. Allow Bluetooth in your PC
Earlier than you may pair the controller, you will must ensure that Bluetooth is enabled in your PC. To do that, observe these steps:
- Open the Begin menu and click on on Settings.
- Click on on Gadgets.
- Click on on Bluetooth & different units.
- Ensure that the Bluetooth swap is turned on.
2. Pair the Professional Controller with Your PC
As soon as Bluetooth is enabled, you may pair the Professional Controller together with your PC. To do that, observe these steps:
- Press the sync button on the again of the Professional Controller. The button is situated subsequent to the USB-C port.
- The Professional Controller will begin flashing.
- In your PC, click on on the Add Bluetooth or different system button.
- Choose the Professional Controller from the listing of obtainable units.
- As soon as the Professional Controller is paired, it would seem within the listing of linked units.
3. Configure the Professional Controller
As soon as the Professional Controller is paired, you may configure it to your liking. To do that, observe these steps:
- Open the Management Panel.
- Click on on {Hardware} and Sound.
- Click on on Gadgets and Printers.
- Proper-click on the Professional Controller and choose Gamepad settings.
- Now you can configure the buttons, triggers, and sticks on the Professional Controller.
Word:
The Swap Professional Controller can also be suitable with the Nintendo Swap On-line app for PC. This lets you use the controller to play Nintendo Swap video games in your PC. To do that, you will must obtain the Nintendo Swap On-line app from the Microsoft Retailer. As soon as you’ve got put in the app, you may observe the steps above to pair the Professional Controller together with your PC.
Troubleshooting
If you happen to’re having bother connecting the Professional Controller to your PC, attempt the next troubleshooting ideas:
- Ensure that the Professional Controller is totally charged.
- Ensure that Bluetooth is enabled in your PC.
- Strive restarting your PC.
- Strive pairing the Professional Controller with a unique USB cable.
- If you happen to’re nonetheless having bother, you may contact Nintendo assist for assist.
How To Join A Swap Professional Controller To Computer
The Nintendo Swap Professional Controller is a superb possibility for PC gaming, providing a cushty and acquainted structure. It is also comparatively straightforward to connect with your PC, whether or not you are utilizing Home windows, macOS, or Linux.
To attach the Swap Professional Controller to your PC, you will want a USB-C cable. Upon getting the cable, observe these steps:
- Plug one finish of the USB-C cable into the Swap Professional Controller.
- Plug the opposite finish of the USB-C cable into your PC.
- The Swap Professional Controller ought to now be acknowledged by your PC.
If the Swap Professional Controller will not be acknowledged by your PC, attempt the next:
- Ensure that the USB-C cable is correctly linked to each the Swap Professional Controller and your PC.
- Strive utilizing a unique USB-C cable.
- Restart your PC.
As soon as the Swap Professional Controller is linked to your PC, you should utilize it to play video games. The Swap Professional Controller is suitable with most PC video games, however chances are you’ll must configure the controls for some video games.
Individuals Additionally Ask
How do I join a Swap Professional Controller to PC wirelessly?
You can’t join the Swap Professional Controller to PC wirelessly.
How do I exploit the Swap Professional Controller on Steam?
To make use of the Swap Professional Controller on Steam, observe these steps:
- Open Steam.
- Click on on the "View" menu.
- Choose "Settings".
- Click on on the "Controller" tab.
- Choose the "Common Controller Settings" button.
- Test the field subsequent to "Nintendo Swap Professional Controller".
- Click on on the "OK" button.
How do I repair the Swap Professional Controller not engaged on PC?
If the Swap Professional Controller will not be engaged on PC, attempt the next:
- Ensure that the USB-C cable is correctly linked to each the Swap Professional Controller and your PC.
- Strive utilizing a unique USB-C cable.
- Restart your PC.
- Replace the drivers to your PC’s USB controller.
