Making an attempt to take away a cussed bathtub faucet is usually a irritating expertise. Nevertheless, with the precise instruments and somewhat little bit of endurance, it is a job that may be achieved by most DIYers.
Earlier than you start, it is necessary to assemble the required instruments. You will want a wrench, a pair of pliers, and a screwdriver. Moreover, you may additionally want a putty knife or a utility knife to assist take away any caulk or sealant across the faucet. After getting your instruments assembled, you possibly can start the method of eradicating the tap.
Step one is to show off the water provide to the tap. This may often be performed by turning off the valves positioned below the sink. As soon as the water is turned off, you possibly can start to loosen the nuts that maintain the tap in place. These nuts are usually positioned on the underside of the tap, and they are often loosened utilizing a wrench. As soon as the nuts are free, you possibly can take away the tap by pulling it straight up. Watch out to not harm the sink or the encircling countertop when eradicating the tap.
Figuring out the Sort of Faucet and Deal with
Earlier than you take away the tap, it is important to establish the kind of faucet and deal with you will have. It will enable you select the proper instruments and strategy for the job.
Kinds of Taps
There are two major varieties of bathtub taps: single-handle and two-handle. Single-handle taps have one lever that controls each the water temperature and circulate, whereas two-handle taps have separate handles for cold and warm water.
Kinds of Handles
Faucet handles are available numerous types, together with lever handles, cross handles, and knob handles. Lever handles are the commonest sort of handles, whereas cross handles and knob handles are extra conventional.
Lever Handles
Lever handles are usually product of metallic or plastic and have a single lever that strikes up and down or left and proper to regulate the water temperature and circulate.
Cross Handles
Cross handles are product of metallic or plastic and have two handles that transfer perpendicular to one another. The left deal with controls the recent water, whereas the precise deal with controls the chilly water.
Knob Handles
Knob handles are product of metallic or plastic and have two knobs that flip clockwise and counterclockwise to regulate the water temperature and circulate.
|
| Faucet Sort | Deal with Sort |
|---|---|
| Single-handle | Lever deal with |
| Two-handle | Cross handles |
| Knob handles |
Gathering Obligatory Instruments
Instruments Required:
| Device | Function |
|---|---|
| Adjustable wrench | Loosens and tightens nuts and bolts of all sizes |
| Channel-type pliers | Grips and turns spherical objects like the tub drain |
| Adjustable basin wrench | Particularly designed to entry and loosen difficult-to-reach nuts behind the tap |
| Teflon tape | Creates a watertight seal round threaded connections |
| Painter’s tape | Protects the tub floor from scratches and dents |
| Material or towel | Prevents moisture from damaging surrounding areas |
| Phillips and flathead screwdrivers (elective) | Tightens or loosens screws relying on the tap design |
| Allen wrench (elective) | Tightens or loosens bolts with hexagonal heads |
| Bucket | Catches water dripping in the course of the elimination course of |
Guarantee you will have all the required instruments earlier than starting the elimination course of. Replacements for any lacking instruments might be discovered at {hardware} shops or plumbing provide facilities.
Turning Off Water Provide
Earlier than you start working in your bathtub faucet, it’s essential to show off the water provide to forestall any water harm or interruptions in the course of the course of. Here is a step-by-step information that will help you flip off the water provide:
- Find the shut-off valves: Discover the 2 shut-off valves, often positioned below the sink or behind the tub. They’re usually small, spherical handles or lever-operated valves.
- Flip off the recent water valve: Utilizing a wrench or pliers, flip the recent water valve clockwise till it’s absolutely closed. It will cease the circulate of scorching water to the tap.
- Flip off the chilly water valve: Find the chilly water valve, which is often subsequent to the recent water valve. Flip it clockwise till it’s fully closed to cease the circulate of chilly water.
Further Suggestions:
- Should you can’t find the shut-off valves below the sink or behind the tub, examine within the basement or crawl house.
- If the shut-off valves are previous or rusty, use a penetrating oil to loosen them up earlier than turning them.
- If in case you have any problem turning off the water provide, contact a licensed plumber for help.
| Valve Sort | Closing Path |
|---|---|
| Lever-operated | Transfer the lever in direction of the “off” place |
| Spherical deal with | Flip the deal with clockwise |
Loosening the Cartridge or Valve
Most trendy bathtub taps have cartridges or valves that management the circulate of water. To loosen a cartridge, you may usually want a cartridge puller, which is a small device with prongs that match into the slots on the cartridge. If you do not have a cartridge puller, you possibly can attempt utilizing a pair of needle-nose pliers, however watch out to not harm the cartridge. As soon as the cartridge is free, you possibly can pull it out of the tap physique.
To loosen a valve, you may usually want an Allen wrench or a screwdriver. Insert the wrench or screwdriver into the screw on the highest of the valve and switch it counterclockwise to loosen the valve. As soon as the valve is free, you possibly can take away it from the tap physique.
Should you’re having hassle loosening the cartridge or valve, you might want to use some penetrating oil to the threads. Let the penetrating oil sit for a couple of minutes earlier than attempting to loosen the cartridge or valve once more.
Here is a desk summarizing the steps for loosening the cartridge or valve:
| Step | Description |
|---|---|
| 1 | Flip off the water provide to the tap. |
| 2 | Take away the aerator from the tap spout. |
| 3 | Insert the cartridge puller or Allen wrench into the screw on the highest of the cartridge or valve. |
| 4 | Flip the cartridge puller or Allen wrench counterclockwise to loosen the cartridge or valve. |
| 5 | Pull the cartridge or valve out of the tap physique. |
Eradicating the Faucet Physique
As soon as the deal with is eliminated, it’s good to take away the tap physique. To do that, comply with these steps:
- Find the retaining nut that secures the tap physique to the valve. It’s often positioned on the base of the tap physique, simply above the mounting flange.
- Utilizing a wrench or pliers, rigorously loosen the retaining nut. Watch out to not over-tighten the nut, as this may harm the tap physique.
- Pull the tap physique straight up and off the valve. There could also be some resistance, however it ought to come off simply.
- If the tap physique doesn’t come off simply, you might want to make use of a penetrating lubricant to assist loosen the retaining nut. Apply the lubricant to the nut and let it sit for a couple of minutes earlier than attempting to loosen it once more.
- As soon as the tap physique is eliminated, you possibly can entry the valve and the cartridge (if relevant). Chances are you’ll must take away the cartridge with the intention to change the tap or to restore the valve.
Suggestions for Eradicating the Faucet Physique
- If the tap physique is corroded or rusted, you might want to make use of a penetrating lubricant to assist loosen it.
- Watch out to not over-tighten the retaining nut, as this may harm the tap physique.
- If you’re having problem eradicating the tap physique, you possibly can name a plumber for help.
| Device | Use |
|---|---|
| Adjustable wrench | To loosen and tighten the retaining nut |
| Pliers | To carry the tap physique in place whereas loosening the retaining nut |
| Penetrating lubricant | To assist loosen the retaining nut whether it is corroded or rusted |
Changing the Faucet Physique
Changing the tap physique is a barely extra concerned course of than changing the cartridge, however it’s nonetheless comparatively easy. Comply with these steps:
1. Collect your instruments and supplies.
- Adjustable wrench
- Screwdriver
- New faucet physique
- Plumber’s putty
- Teflon tape
2. Flip off the water provide.
Find the shut-off valves beneath the sink and switch them off. You may establish the valves by their purple handles.
3. Disconnect the water traces.
Unscrew the nuts that connect the water traces to the tap physique. Chances are you’ll want to make use of an adjustable wrench.
4. Unscrew the mounting nuts.
There are two nuts that maintain the tap physique in place. Use an adjustable wrench to loosen them.
5. Take away the previous faucet physique.
As soon as the nuts are free, you possibly can pull the previous faucet physique straight up and out of the sink.
6. Put together the brand new faucet physique.
Apply a bead of plumber’s putty across the base of the brand new faucet physique. Wrap a couple of turns of Teflon tape across the threads of the water traces.
7. Set up the brand new faucet physique.
Insert the brand new faucet physique into the sinkhole. Tighten the mounting nuts by hand, then use an adjustable wrench to additional tighten them.
8. Reconnect the water traces.
Hand-tighten the nuts that connect the water traces to the tap physique. Use an adjustable wrench to additional tighten them, however watch out to not overtighten.
9. Activate the water provide.
Activate the shut-off valves beneath the sink and examine for leaks. Should you see any leaks, tighten the nuts or connections as crucial.
How To Get Bathtub Faucet Off
Bathtub taps is usually a ache to take away, particularly in the event that they’re previous or rusted. However with the precise instruments and somewhat little bit of know-how, you will get the job performed very quickly.
Step 1: Collect your instruments
You will want the next instruments to take away a bath faucet:
- Adjustable wrench
- Allen wrench (if the tap has set screws)
- Channel-lock pliers
- Bucket
- Rags
Step 2: Flip off the water
Earlier than you begin engaged on the tap, it’s good to flip off the water provide. It will stop any water from leaking out and making a large number.
To show off the water provide, find the shut-off valves below the sink. Shut each valves by turning them clockwise.
Step 3: Disconnect the water traces
As soon as the water provide is turned off, you possibly can disconnect the water traces from the tap. To do that, use an adjustable wrench to loosen the nuts that maintain the traces in place.
Watch out to not over-tighten the nuts, as this might harm the traces.
Step 4: Take away the tap
Now that the water traces are disconnected, you possibly can take away the tap. To do that, use an Allen wrench to take away the set screws that maintain the tap in place.
As soon as the set screws are eliminated, you need to use a channel-lock pliers to softly rock the tap forwards and backwards till it loosens.
Step 5: Clear the world
As soon as the tap is eliminated, you possibly can clear the world the place it was put in. Use a bucket and rags to scrub up any water or particles.
Folks Additionally Ask About How To Get Bathtub Faucet Off
How do I take away a bath faucet deal with?
To take away a bath faucet deal with, first use an Allen wrench to take away the set screw that holds the deal with in place. As soon as the set screw is eliminated, you possibly can pull the deal with straight off.
How do I change a bath faucet cartridge?
To switch a bath faucet cartridge, first flip off the water provide. Then, take away the tap deal with and unscrew the cartridge nut. As soon as the cartridge nut is eliminated, you possibly can pull the cartridge straight out of the tap physique.
How do I repair a leaky bathtub faucet?
There are a couple of other ways to repair a leaky bathtub faucet. One widespread resolution is to interchange the washer or O-ring that’s inflicting the leak.
