A shower diverter valve is a plumbing fixture that allows you to switch the flow of water between your showerhead and bathtub faucet. If your diverter valve is not working properly, you may not be able to get the water to flow where you want it to. Fortunately, fixing a shower diverter valve is a relatively simple task that can be completed in just a few minutes.
The first step is to identify the type of diverter valve that you have. There are two main types of diverter valves: push-button and pull-up. Push-button diverter valves are the most common type, and they are typically found on showerheads that have a separate handle for controlling the water temperature. Pull-up diverter valves are less common, and they are typically found on showerheads that have a single handle for controlling both the water temperature and the flow of water.
Once you have identified the type of diverter valve that you have, you can begin the repair process. For push-button diverter valves, the first step is to remove the button. This can usually be done by simply pulling on the button. Once the button is removed, you will need to remove the diverter valve cartridge. The cartridge is typically held in place by a screw or a clip. Once the cartridge is removed, you can inspect it for damage. If the cartridge is damaged, you will need to replace it.
How To Fix A Shower Diverter Valve
A shower diverter valve is a plumbing fixture that allows you to switch the flow of water between your showerhead and tub spout. If your diverter valve is not working properly, you may not be able to get the water to flow where you want it to. In this article, we will show you how to fix a shower diverter valve so that you can get your shower back up and running in no time.
Step 1: Gather your tools
Before you start, you will need to gather a few tools. These include:
- Phillips screwdriver
- Flathead screwdriver
- Wrench
- Plumber’s putty
- New diverter valve (if necessary)
Step 2: Turn off the water supply
The first step is to turn off the water supply to your shower. This will prevent any water from leaking out while you are working on the diverter valve.
Step 3: Remove the old diverter valve
Once the water supply is turned off, you can remove the old diverter valve. To do this, use a Phillips screwdriver to remove the screws that are holding the valve in place. Once the screws are removed, you can pull the valve out of the wall.
Step 4: Install the new diverter valve
If you are replacing the old diverter valve with a new one, now is the time to do it. To install the new valve, simply insert it into the hole in the wall and tighten the screws that hold it in place.
Step 5: Apply plumber’s putty
Before you reattach the diverter valve to the wall, you will need to apply a bead of plumber’s putty around the base of the valve. This will help to seal the valve and prevent any water from leaking out.
Step 6: Reattach the diverter valve
Once you have applied the plumber’s putty, you can reattach the diverter valve to the wall. To do this, simply push the valve back into the hole in the wall and tighten the screws that hold it in place.
Step 7: Turn on the water supply
Once the diverter valve is reattached, you can turn on the water supply to your shower. Check for any leaks around the valve. If there are any leaks, you may need to tighten the screws that hold the valve in place or apply more plumber’s putty.
People Also Ask About How To Fix A Shower Diverter Valve
How do you know if a shower diverter valve is bad?
There are a few signs that a shower diverter valve is bad. These include:
- Water leaking from the valve
- The valve is difficult to turn
- The valve does not switch the flow of water properly
Can I fix a shower diverter valve myself?
Yes, you can fix a shower diverter valve yourself. However, it is important to note that this is a plumbing repair, so if you are not comfortable working with plumbing, it is best to call a plumber.
How much does it cost to fix a shower diverter valve?
The cost to fix a shower diverter valve will vary depending on the type of valve you have and the labor costs in your area. However, you can expect to pay between $50 and $150 for parts and labor.
