When your Hisense TV is giving you trouble and you don’t have the remote, resetting it to factory settings can be a quick fix. While it may seem like a daunting task, it’s actually quite simple and can be done in just a few steps. To begin, locate the small reset button on the back or side of your TV. It’s usually recessed and may be labeled “Reset” or have a small symbol next to it. Once you’ve found the reset button, you’ll need a paperclip or a similar thin object to press and hold it down.
With the reset button held down, turn on your TV. Continue holding the reset button for about 30 seconds, or until the TV’s power light starts blinking. Once the power light starts blinking, you can release the reset button. The TV will now go through the reset process, which may take a few minutes. When the reset is complete, the TV will restart and you’ll be able to set it up again from scratch.
Resetting your Hisense TV without the remote is a simple and effective way to troubleshoot any problems you may be experiencing. By following these steps, you can get your TV back up and running in no time. Additionally, if you’re still having trouble resetting your TV, you can always contact Hisense customer support for assistance.
Manually Power Cycle the TV
Manually power cycling your Hisense TV is a simple yet effective way to reset it without using a remote. This process involves physically disconnecting and reconnecting the power supply, which can help clear any temporary issues or glitches that may be preventing the TV from functioning properly. Here are the detailed steps you can follow:
Before You Begin
- Ensure the TV is plugged into a working power outlet.
- Locate the main power cord connected to the TV.
- Gather a clean, dry cloth or towel.
**
Step 1: Unplug the Power Cord
- Firmly grasp the power cord and gently pull it out of the power outlet.
- Wait for a full 60 seconds. This gives the TV’s internal components ample time to discharge any residual power.
**
Step 2: Clean the Power Cord Connections
- Use the clean cloth or towel to wipe away any dust or debris that may have accumulated on the power cord and the power outlet.
- Ensure that both ends of the power cord are clean and dry.
**
Step 3: Replug the Power Cord
- Reconnect the power cord securely into the power outlet.
- Wait for a few seconds for the TV to start up.
Optional: Perform a Hard Reset
- If the manual power cycle does not resolve the issue, you can try performing a hard reset.
- To do this, follow the same steps as the manual power cycle but extend the wait time to 5 minutes before reconnecting the power cord.
| Time | Action |
|---|---|
| 0 Seconds | Unplug the power cord. |
| 60 Seconds | Wait for the TV’s internal components to discharge. |
| Optional 5 Minutes | Perform a hard reset if needed. |
| After Waiting | Reconnect the power cord. |
How To Reset Hisense TV Without Remote
Use the TV’s Buttons or Joystick
If you don’t have a remote, you can still reset your Hisense TV using the buttons or joystick on the TV itself. The location of these buttons or joystick may vary depending on your TV model, but they are typically located on the back or side of the TV.
Resetting using Buttons
1. Locate the reset button on the back or side of your TV. It is usually a small, recessed button labeled “Reset” or “Factory Reset.”
2. Use a paperclip or a similar object to press and hold the reset button for about 10 seconds.
3. Release the reset button and wait for the TV to reboot.
Resetting Using Joystick
1. Locate the joystick on the back or side of your TV. It is usually a small, round button with a navigation pad around it.
2. Press and hold the joystick button for about 10 seconds.
3. Release the joystick button and wait for the TV to reboot.
| Reset Method | Steps |
|---|---|
| Using Buttons | Locate the reset button, press it for 10 seconds, release it and wait for reboot |
| Using Joystick | Locate the joystick, press it for 10 seconds, release it and wait for reboot |
Reset Using the Service Menu
To reset your Hisense TV using the service menu, follow these steps:
1. Turn off the TV.
2. Unplug the TV from the power outlet.
3. Wait 60 seconds.
4. Press and hold the “Power” and “Volume Down” buttons on the TV simultaneously.
5. While still holding the “Power” and “Volume Down” buttons, plug the TV back into the power outlet.
6. Continue holding the “Power” and “Volume Down” buttons until the TV turns on.
7. The service menu will appear on the screen.
8. Navigate through the service menu using the arrow keys on the remote control.
9. Select the “Reset” option.
10. Press the “OK” button.
11. The TV will reset to its factory default settings.
Factory Reset from the Settings Menu
If you have access to the TV’s settings menu, you can perform a factory reset without the remote control. Here’s how to do it:
- Navigate to the Settings menu using the TV’s control panel on the back or side of the TV.
- Select the “System” or “General” tab.
- Scroll down to the “Reset” option.
- Select “Factory Reset” or “Reset TV.” You may be prompted to enter a confirmation code or password. If you don’t know the password, try one of the most common default passwords for Hisense TVs, such as 0000, 1111, or 1234.
- Confirm the reset by selecting “Yes” or “Reset.” The TV will restart and erase all data and settings.
Once the reset is complete, you will need to set up the TV again, including setting up the Wi-Fi connection and TV channels.
Use the Hisense Smart Remote App
Using the Hisense Smart Remote App to reset your TV is a convenient option if you don’t have the physical remote at hand. Follow these steps:
- Ensure that your TV and mobile device are connected to the same Wi-Fi network.
- Download the Hisense Smart Remote App from the Apple App Store or Google Play Store.
- Launch the app and follow the on-screen instructions to pair it with your TV.
- Once paired, navigate to the “Settings” menu within the app and select “Factory Reset.”
- Confirm the reset process by entering the TV’s default password, which is typically “123456” or “0000.” In some cases, you may need to enter your TV’s unique password, which can be found on the back of the TV or in the user manual.
- Wait for the reset process to complete. Once finished, your TV will restart, and the factory settings will be restored.
| Reset Method | Requirements | Steps |
|---|---|---|
| Hisense Smart Remote App | – Hisense Smart Remote App installed on mobile device – TV and mobile device connected to the same Wi-Fi network |
– Pair app with TV – Navigate to “Settings” > “Factory Reset” – Enter default password (typically “123456” or “0000”) – Wait for reset to complete |
Reset Using the Roku Remote App
Step 1: Install the Roku Remote App
Download and install the Roku Remote App on your smartphone or tablet from the Apple App Store (iOS) or Google Play Store (Android).
Step 2: Connect to the Roku Device
Ensure that your smartphone or tablet is connected to the same Wi-Fi network as your Hisense TV with Roku built-in. Open the Roku Remote App and tap on the "Devices" tab. Select your Hisense TV and connect to it.
Step 3: Open the Side Menu
Once connected, open the side menu in the Roku Remote App. On iOS, tap the three horizontal lines in the top left corner. On Android, swipe in from the left edge of the screen.
Step 4: Navigate to the Settings Page
In the side menu, scroll down and tap on "Settings."
Step 5: Select “System”
Under the "Settings" page, select "System."
Step 6: Reset the TV (Expanded)
Under "System," you will see the option to "Factory reset." Selecting this option will bring up a confirmation dialog box. Carefully read the warning message before proceeding.
-
Warning: Factory resetting your Roku TV will erase all user data, including your streaming accounts, preferences, and downloaded apps.
-
Confirm Reset: If you are sure you want to reset the TV, click "Factory reset" again to confirm the action.
-
Reset Process: The reset process may take a few minutes. Once complete, the TV will restart automatically and you will need to set it up again as a new device.
Reset Using Universal Remote Codes
If you don’t have a Hisense remote but have a universal remote, you can use specific codes to reset your TV. Here’s how:
1. Gather Your Tools
Make sure you have the universal remote and a clear view of the TV.
2. Enter the Setup Mode
Press and hold the “Setup” button on the universal remote for 5-10 seconds.
3. Enter the Manufacturer Code
Using the number keypad, enter the manufacturer code for Hisense: 0281.
4. Test the TV Power Button
Point the remote at the TV and press the “Power” button. If the TV turns off, you’ve entered the correct code.
5. Initiate the Reset Sequence
Press the following sequence of buttons in order: “Mute” > “9” > “1” > “1”.
6. Confirm the Reset
The TV will ask for confirmation. Press the “OK” or “Enter” button.
7. Troubleshooting the Reset Sequence
If the reset sequence does not work, try the following troubleshooting steps:
- Check the batteries of your universal remote and replace them if necessary.
- Make sure the TV is set to the correct input source.
- Try using different manufacturer codes for Hisense (e.g., 0248, 0261).
- If all else fails, unplug the TV from power for a few minutes and plug it back in.
Once you’ve successfully reset the TV, you can set it up again using the universal remote.
Unplug and Replug the TV
Unplugging and replugging the TV is the most common way to reset it. This method works by cutting off the power supply to the TV, which forces it to reboot. To unplug and replug the TV, follow these steps:
- Unplug the TV from the power outlet.
- Wait 30 seconds.
- Plug the TV back into the power outlet.
- Turn on the TV.
If the TV does not turn on after you plug it back in, try pressing and holding the power button on the TV for 10 seconds. This will force the TV to hard reset.
Additional Tips
- If you are having trouble unplugging the TV, you can try using a pair of pliers or a screwdriver to gently pry the plug out of the outlet.
- If you are unplugging the TV from a power strip, make sure to unplug the power strip from the wall outlet as well.
- Once the TV is unplugged, you can try resetting it by pressing and holding the power button on the TV for 10 seconds.
- If the TV still does not turn on after you have tried these steps, you may need to contact Hisense customer support.
Contact Hisense Support
If you are unable to reset your Hisense TV without a remote, you can contact Hisense support for assistance. Here is how you can reach them:
- By phone: You can call Hisense support at 1-888-935-8880.
- By email: You can send an email to Hisense support at support@hisense-usa.com.
- By live chat: You can chat with a Hisense support representative online at their website: https://www.hisense-usa.com/support/.
When you contact Hisense support, be sure to have the following information ready:
- Your TV model number
- Your TV’s serial number
- A description of the problem you are experiencing
Hisense support representatives will be able to help you troubleshoot the problem and provide you with instructions on how to reset your TV without a remote.
Reset Using Power Cycling
Power cycling is a simple but effective way to reset your Hisense TV without a remote. Here are the steps:
- Unplug your TV from the power outlet.
- Wait for 60 seconds.
- Plug your TV back into the power outlet.
- Turn on your TV.
Your TV should now be reset to its factory default settings.
Reset Using the Control Panel
If your Hisense TV has a control panel, you can use it to reset the TV without a remote. Here are the steps:
- Locate the control panel on your TV. It is usually located on the back or side of the TV.
- Press and hold the power button on the control panel for 5 seconds.
- Release the power button.
- Your TV should now be reset to its factory default settings.
Reset Using the Factory Reset Option
If you are unable to reset your Hisense TV using the previous methods, you can use the factory reset option. Here are the steps:
- Go to the Settings menu on your TV.
- Select the System tab.
- Select the Factory reset option.
- Enter your TV’s password.
- Select the Reset option.
Your TV should now be reset to its factory default settings.
Reset Using the Service Menu
The service menu is a hidden menu that allows you to access advanced settings on your TV. You can use the service menu to reset your TV without a remote. Here are the steps:
- Turn on your TV.
- Press the following buttons on your TV remote in the following order: Menu, 1, 1, 4, 7.
- The service menu will now appear on your TV screen.
- Use the arrow keys on your remote to navigate to the Factory reset option.
- Press the OK button to reset your TV.
Your TV should now be reset to its factory default settings.
Reset Using a USB Drive
If you have a USB drive, you can use it to reset your Hisense TV without a remote. Here are the steps:
- Download the Hisense TV firmware update file from the Hisense website.
- Copy the firmware update file to a USB drive.
- Insert the USB drive into your TV.
- Turn on your TV.
- Your TV will automatically detect the firmware update file and begin the update process.
Once the firmware update is complete, your TV will be reset to its factory default settings.
Troubleshooting Common Issues
1. Power Cycle the TV
Unplug the TV from the power outlet for 60 seconds, then plug it back in. This will reset the TV’s internal memory and may resolve common issues.
2. Check the Power Supply
Ensure that the TV is receiving power. Check the power cord and outlet for any damage or loose connections.
3. Reset the TV to Factory Settings
Navigate to the TV’s Settings menu using the buttons on the TV itself. Select the “Factory Reset” option to restore the TV to its original settings. Note that this will erase all user data.
4. Check for Firmware Updates
Updates may address common issues. Check the TV’s settings for any available updates and install them.
5. Contact Hisense Support
If you are unable to resolve the issue, contact Hisense support for assistance. Provide them with the model number and serial number of your TV.
Using External Buttons to Reset Hisense TV
6. Reset Using the Power Button
Press and hold the power button on the TV for about 10 seconds. The TV will turn off and then back on, indicating that it has been reset.
7. Reset Using the Volume Buttons
Press and hold the volume up and down buttons simultaneously for about 5 seconds. The TV will display a message asking you to press OK to reset the TV.
8. Reset Using the Channel Buttons
Press and hold the channel up and down buttons simultaneously for about 5 seconds. The TV will display a message asking you to press OK to reset the TV.
9. Reset Using the Control Buttons on the Back of the TV
Locate the control buttons on the back of the TV. Press and hold the power button while simultaneously pressing the menu button. Hold both buttons for about 5 seconds until the TV turns off and then back on.
10. Reset Using the Hidden Reset Button
Some Hisense TVs have a hidden reset button located on the back or side of the TV. Use a paperclip or a small object to press the button and hold it for about 5 seconds. The TV will turn off and then back on, indicating that it has been reset. The location of the hidden reset button may vary depending on the model of your TV. Refer to the TV’s user manual for specific instructions.
How To Reset Hisense Tv Without Remote
If you’ve lost your Hisense TV remote, or if it’s simply not working, you can still reset your TV to its factory settings without it. Here’s how:
-
Unplug your TV from the power outlet.
-
Wait 60 seconds.
-
Press and hold the power button on the back of your TV for 5 seconds.
-
While continuing to hold the power button, plug your TV back into the power outlet.
-
Continue holding the power button for another 10 seconds.
-
Release the power button.
Your TV will now reset to its factory settings. Once the reset is complete, you will need to set up your TV again, including connecting to your Wi-Fi network and logging in to your streaming services.
People also ask about How To Reset Hisense Tv Without Remote
Can I reset my Hisense TV with the app?
No, you cannot reset your Hisense TV with the app. In order to reset your TV, you will need to either use the remote or the buttons on the back of the TV.
How do I reset my Hisense TV if it’s frozen?
If your Hisense TV is frozen, you can try unplugging it from the power outlet and then plugging it back in. If that doesn’t work, you can try resetting the TV to its factory settings. To do this, follow the steps outlined above.
How do I reset my Hisense TV if I forgot my password?
If you forgot your Hisense TV password, you can reset it by following the steps outlined above. Once the reset is complete, you will be able to set up your TV again, including creating a new password.
