Navigating the intricate complexities of an Armitron watch can be a daunting task, especially when it comes to adjusting the time. However, with a careful approach and a clear understanding of the watch’s mechanisms, you can effortlessly master this essential skill. Whether you’re a seasoned watch enthusiast or a novice seeking guidance, let us embark on a journey through the steps involved in altering the time on your Armitron timepiece.
Before delving into the specifics of time adjustment, it’s crucial to identify the type of Armitron watch you possess. Different models may require varying approaches, so it’s essential to consult the user manual or seek assistance from a qualified watchmaker if necessary. Once you’ve confirmed the model, gather the necessary tools – a small, flat-head screwdriver or a toothpick – and prepare yourself for a seamless time-setting experience.
Now, let’s delve into the practical steps involved in changing the time on your Armitron watch. Locate the small indentation or notch on the side of the watch case, usually near the 2 o’clock or 4 o’clock position. Gently insert the screwdriver or toothpick into the notch and apply gentle pressure inward. You’ll feel a slight resistance as the watch crown pops out, revealing the time-setting mechanism.
Locating the Time Adjustment Buttons
Armitron watches typically feature two or three buttons on the side of the case that are used to adjust the time. These buttons may be labeled with symbols such as “A,” “B,” “C,” or “Mode,” or they may have no labels at all. To locate the time adjustment buttons on your Armitron watch, consult the user manual or follow these general steps:
- Examine the side of the watch case for small, recessed buttons. These buttons are usually located near the top or bottom of the case.
- If there are three buttons, the middle button is typically used to adjust the time. If there are only two buttons, one of them will be used for time adjustment.
- If the buttons are not labeled, try pressing each button one at a time to see if it advances the time or changes the display mode.
Once you have located the time adjustment buttons, you can proceed to the next step of changing the time on your Armitron watch.
Preparing the Watch for Time Change
Before beginning the time change process, it’s essential to ensure that your Armitron watch is ready. Follow these steps to prepare your watch:
1. Check the Battery
A low battery can interfere with the time change process. Replace the battery if it’s weak or dead.
2. Locate the Time Adjustment Buttons
Most Armitron watches have two buttons, typically labeled “Mode” and “Adjust,” used to adjust the time. Familiarize yourself with the location of these buttons.
If your watch has more than two buttons, refer to the user manual for specific instructions on which buttons to use for time adjustment.
| Watch Model | Time Adjustment Buttons |
|---|---|
| Armitron Sport #24/4284 | Mode, Adjust |
| Armitron Dress #91B6 | Mode, Reset |
| Armitron Multifunction #40/9911 | C, Light |
Entering Time Adjustment Mode
To change the time on your Armitron watch, you’ll need to first enter Time Adjustment Mode. Here’s how:
- Pull out the crown to the first click. This will stop the watch.
- Rotate the crown clockwise to move the hour hand forward. Continue rotating until the hour hand reaches the correct time.
- Press the crown back in to save the new time. This will also start the watch again.
Additional Tips On Entering Time Adjustment Mode
- If you need to adjust the minutes, press the crown in once to switch to Minute Adjustment Mode. Rotate the crown clockwise or counterclockwise to adjust the minutes.
- If you need to adjust the date, press the crown in twice to switch to Date Adjustment Mode. Rotate the crown clockwise or counterclockwise to adjust the date.
- If you make a mistake, simply pull the crown back out to the first click and start over. You can also use the table below for reference.
| Mode | Adjustments |
|---|---|
| Hour Adjustment Mode | Hour and AM/PM indicator |
| Minute Adjustment Mode | Minutes |
| Date Adjustment Mode | Date |
Setting the Hours
To set the hours, first pull out the crown to the second position. This will stop the second hand and allow you to adjust the time. Next, turn the crown clockwise to move the hour hand forward. If you need to move the hour hand backward, turn the crown counterclockwise.
Steps:
| Step | Action |
|---|---|
| 1 | Pull the crown out to the second position. |
| 2 | Turn the crown clockwise to move the hour hand forward. |
| 3 | Turn the crown counterclockwise to move the hour hand backward. |
Once you have set the hours, push the crown back in to the first position. This will start the second hand again and save your changes.
Setting the Minutes
To change the minutes on your Armitron watch, follow these steps:
- Pull the crown out to position 2. This will stop the second hand and allow you to set the minutes.
- Turn the crown clockwise or counterclockwise to set the minutes. One full turn will move the minute hand forward or backward by 60 minutes.
- Push the crown back in to position 1. This will save your changes and start the second hand again.
Here is a table summarizing the steps for setting the minutes:
Step Action 1 Pull the crown out to position 2. 2 Turn the crown clockwise or counterclockwise to set the minutes. 3 Push the crown back in to position 1. -
Tip:
If you overshoot the correct time, simply turn the crown the other way to adjust it.
Setting the Time
To set the time on your Armitron watch, follow these steps:
1. Locate the crown on the side of the watch.
2. Pull the crown out to the first click.
3. Turn the crown clockwise or counterclockwise to set the hour and minute hands.
4. Once the hour and minute hands are set, push the crown back in to the first click.
5. Turn the crown clockwise or counterclockwise to set the seconds hand (optional).
Setting the Seconds (Optional)
The seconds hand can be set to the nearest second by following these steps:
1. Pull the crown out to the second click.
2. Wait until the seconds hand is at the 12 o’clock position.
3. Push the crown back in to the first click.
4. Turn the crown clockwise or counterclockwise to set the seconds hand to the desired time.
5. Once the seconds hand is set, push the crown back in to the second click.
6. The seconds hand will now be set to the nearest second and will start running. To stop the seconds hand, pull the crown out to the second click and then push it back in to the first click.
Adjusting the Time
To adjust the time on your Armitron watch, follow these steps:
- Pull out the crown to the second position.
- Turn the crown to adjust the hour hand.
- Push the crown back in to the first position.
- Turn the crown to adjust the minute hand.
- Push the crown back in to the second position.
- Turn the crown to adjust the second hand.
- When the second hand reaches the desired time, push the crown back in to the first position.
Adjusting the Day (Optional)
If your Armitron watch has a day display, you can adjust it by following these steps:
- Pull out the crown to the third position.
- Turn the crown to adjust the day of the week.
- Push the crown back in to the first position.
Additional Tips
- If your Armitron watch has a screw-down crown, you will need to unscrew it before you can adjust the time or day.
- Do not overtighten the crown when you push it back in.
- If you have any difficulty adjusting the time or day on your Armitron watch, please consult the user manual or contact the manufacturer.
| Model | Number of Positions |
|---|---|
| 20/4000 | 2 |
| 40/82xx | 3 |
| 20/4090 | 2 |
Pull Out the Crown
Locate the crown on the side of the watch and gently pull it out to the first position. This will disengage the watch from the movement, allowing you to adjust the time.
Turn the Crown
Turn the crown clockwise to advance the time. The second hand will start moving, and the hour and minute hands will follow. Turn the crown until the current time is displayed.
Push In the Crown
Once the time is set, gently push the crown back into its original position. The watch is now set to the correct time.
Adjusting the Date (Optional)
If you want to adjust the date, pull the crown out to the second position. This will disengage the date wheel. Turn the crown clockwise until the correct date is displayed.
If your watch has a quick-set date feature, you can adjust the date by pressing the button located on the side of the case. The button will advance the date by one day at a time.
Push In the Crown
Once the date is set, gently push the crown back into its original position. The watch is now set to the correct time and date.
Special Note for Digital Watches
If you have a digital watch, the procedure for setting the time and date may be different. Refer to your watch’s user manual for specific instructions.
Saving the Changes
To save the changes you have made to the time on your Armitron watch, you will need to press the “Mode” button one last time. This will return you to the normal timekeeping mode and the new time will be displayed. If you are not sure if the changes have been saved, you can press the “Mode” button again to cycle through the different modes and check if the time has changed.
Tips
Here are a few tips for saving the changes on your Armitron watch:
- Make sure that you are pressing the “Mode” button correctly. The button should be pressed firmly and held down for a few seconds.
- If you are having trouble saving the changes, you can try resetting the watch. To do this, remove the battery and then replace it. This will reset the watch to its default settings.
- If you have any other questions about how to change the time on your Armitron watch, you can consult the user manual or contact the manufacturer.
The following table provides a summary of the steps involved in saving the changes on your Armitron watch:
| Step | Action |
|---|---|
| 1 | Press the “Mode” button. |
| 2 | Use the “+” and “-” buttons to adjust the time. |
| 3 | Press the “Mode” button again to save the changes. |
Exiting Time Adjustment Mode
Once you have set the time and date on your Armitron watch, you need to exit the Time Adjustment Mode. Here’s how:
1. Press and hold the MODE button for 2 seconds.
The SECONDS digits will start flashing.
2. Press the + or – button to adjust the seconds.
Hold down the button to quickly adjust the seconds.
3. Press the MODE button again.
The MINUTES digits will start flashing.
4. Press the + or – button to adjust the minutes.
Hold down the button to quickly adjust the minutes.
5. Press the MODE button again.
The HOURS digits will start flashing.
6. Press the + or – button to adjust the hours.
Hold down the button to quickly adjust the hours.
7. Press the MODE button again.
The MONTH digits will start flashing.
8. Press the + or – button to adjust the month.
Hold down the button to quickly adjust the month.
9. Press the MODE button again.
The DAY digits will start flashing.
10. Press the + or – button to adjust the day.
Hold down the button to quickly adjust the day.
| Button | Function |
|---|---|
| + button | Advances the time or day. |
| – button | Decreases the time or day. |
| MODE button | Advances the setting mode. |
11. Press the MODE button a final time.
The time and date will be set and you will exit the Time Adjustment Mode.
How to Change the Time on an Armitron Watch
To change the time on an Armitron watch, follow these steps:
- Locate the “reset” button on the watch. It is usually a small, recessed button located on the side of the watch.
- Use a pen or paperclip to press and hold the “reset” button for about two seconds.
- The display will begin to flash. Use the “mode” button to select the time setting you want to change (hours, minutes, or seconds).
- Use the “start/stop” button to adjust the time setting. Each press of the button will advance the time setting by one second.
- Once you have set the correct time, press the “reset” button again to save the changes.
