Disassembling the Firing Mechanism Housing
1. Take away the backplate
Orient the Glock 19 in order that the rear of the body is going through you. Use your thumbs to push down on the locking tabs on the backplate and concurrently slide the backplate down and off the body.
2. Take away the firing pin spring and firing pin
With the backplate eliminated, you will notice the firing pin spring and firing pin. Use your fingers or a small instrument to compress the firing pin spring and pull the firing pin ahead out of the firing mechanism housing.
3. Take away the firing pin security
The firing pin security is positioned on the proper aspect of the firing mechanism housing behind the firing pin. Use your fingers or a small instrument to push down on the firing pin security lever and slide the firing pin security ahead and off the housing.
4. Take away the set off mechanism
To take away the set off mechanism, you will want to first take away the next 4 parts:
| Part | Removing steps |
|---|---|
| Set off housing pin | Use a punch to push out the set off housing pin from the proper aspect of the body. |
| Set off spring | As soon as the set off housing pin is eliminated, rotate the set off and pull it out of the body. The set off spring will come out with the set off. |
| Connector | Find the connector on the set off housing and push down on the connector tab. The connector will then slide out of the set off housing. |
| Sear | Find the sear on the set off housing and push down on the sear tab. The sear will then slide out of the set off housing. |
Upon getting eliminated these 4 parts, you may carry the set off mechanism out of the firing mechanism housing.
Detaching the Locking Block and Set off Mechanism
As soon as the slide and barrel have been eliminated, the subsequent step is to detach the locking block and set off mechanism. Comply with these steps:
1. Depress the Locking Block Pin
Find the locking block pin on the left aspect of the body. It’s a small, spring-loaded pin. Depress the pin with a punch or a small screwdriver.
2. Take away the Locking Block
As soon as the locking block pin is depressed, the locking block may be eliminated. Grip the locking block together with your fingers and pull it straight down and out of the body.
3. Disassemble the Set off Mechanism
The set off mechanism is held in place by a set off spring that runs by means of the set off housing. To disassemble the set off mechanism, first take away the set off housing pin by pushing it out with a punch or a small screwdriver. Then take away the set off housing and carry the set off mechanism out of the body.
4. Take away the Firing Pin Security
The firing pin security is a small lever positioned on the left aspect of the slide. To take away the firing pin security, first depress the firing pin security plunger with a punch or a small screwdriver. As soon as the plunger is depressed, rotate the firing pin security till it detaches from the slide.
5. Disassemble the Set off Housing
The set off housing accommodates a number of springs and pins. To disassemble the set off housing, fastidiously comply with these steps:
- Take away the set off spring by lifting it out of the set off housing.
- Take away the firing pin security spring by lifting it out of the set off housing.
- Take away the set off spring retainer plate by lifting it out of the set off housing.
- Take away the firing pin security plunger spring by lifting it out of the set off housing.
- Take away the firing pin security plunger by pulling it straight out of the set off housing.
Disconnecting the Set off Bar and Slide Cease Lever
After eradicating the slide and barrel, the subsequent step is to disconnect the set off bar and slide cease lever. To do that, you will want to rotate the set off bar loop inward and all the way down to launch it from the slide cease lever. Make sure you preserve the loop within the down place in order that it doesn’t have interaction with the slide cease lever if you find yourself reassembling the pistol.
Subsequent, you will want to take away the slide cease lever. To do that, push the slide cease lever inward and rotate it upward. This may disengage the slide cease lever from the slide and let you take away it.
To summarize the steps:
| Step | Motion |
|---|---|
| 1 | Rotate the set off bar loop inward and all the way down to launch it from the slide cease lever. |
| 2 | Push the slide cease lever inward and rotate it upward to disengage it from the slide. |
Reassembly
Comply with these steps to reassemble your Glock 19:
- Align the locking block with the slide.
- Slide the barrel into the slide.
- Insert the slide cease into the slide.
- Slide the recoil spring meeting into the slide.
- Insert the slide into the body.
- Insert the set off housing into the body.
- Insert the set off into the set off housing.
- Insert the journal launch into the body.
- Insert the grip panels into the body.
- Tighten the grip screws.
| Step | Description |
|---|---|
| 1 | Align the locking block with the slide. |
| 2 | Slide the barrel into the slide. |
| 3 | Insert the slide cease into the slide. |
| 4 | Slide the recoil spring meeting into the slide. |
| 5 | Insert the slide into the body. |
| 6 | Insert the set off housing into the body. |
| 7 | Insert the set off into the set off housing. |
| 8 | Insert the journal launch into the body. |
| 9 | Insert the grip panels into the body. |
| 10 | Tighten the grip screws. |
