Replacing the antenna on your 2013 Prius is a simple task that can be completed in a few minutes. When your radio reception is poor or nonexistent, it might be time to replace your vehicle’s antenna. This task can easily be accomplished at home with a few basic tools.
First, you will need to gather your materials: a new antenna, a 10mm socket wrench, and a Phillips head screwdriver. Once you have your materials, you can begin the replacement process. Start by removing the two bolts that hold the antenna in place. Once the bolts are removed, you can pull the antenna straight up and out of the roof of the car. Next, disconnect the electrical connector from the old antenna and connect it to the new antenna. Finally, insert the new antenna into the roof of the car and tighten the two bolts. Your new antenna is now installed and you can enjoy improved radio reception.
Replacing the antenna on your 2013 Prius is a quick and easy task that can be completed in a few minutes. By following these simple steps, you can save yourself the time and expense of taking your car to a mechanic.
Removing the Old Antenna
Step 1: Locate the Antenna
The first step is to locate the antenna. This will vary depending on the make and model of your vehicle. For the 2013 Toyota Prius, the antenna is located on the roof of the car, near the back.
Step 2: Remove the Antenna Base Cap
Next, remove the antenna base cap. This can usually be done by hand, but you may need to use a pair of pliers if the cap is on tightly. Once the cap is removed, you will see the antenna base.
Step 3: Unscrew the Antenna Base
The next step is to unscrew the antenna base. This can be done by hand or with a wrench. Once the antenna base is loose, you can pull it off the car.
Step 4: Disconnect the Antenna Cable
Finally, disconnect the antenna cable from the back of the antenna base. This can be done by unscrewing the cable connector. Once the cable is disconnected, you can remove the old antenna from the car.
| Step | Description |
|---|---|
| 1 | Locate the antenna. |
| 2 | Remove the antenna base cap. |
| 3 | Unscrew the antenna base. |
| 4 | Disconnect the antenna cable. |
How to Replace Antenna 2013 Prius
Replacing the antenna on a 2013 Prius is a simple task that can be completed in a few minutes. Here are the steps involved:
- Locate the antenna on the roof of the Prius. It is a small, black or silver rod that is located near the rear of the roof.
- Unscrew the antenna by turning it counterclockwise. If the antenna is difficult to unscrew, you can use a pair of pliers.
- Remove the antenna from the roof of the Prius.
- Insert the new antenna into the hole in the roof of the Prius.
- Tighten the antenna by turning it clockwise. Do not overtighten the antenna, as this can damage it.
- Test the new antenna by turning on the radio. If the radio reception is clear, the antenna has been installed correctly.
