Replacing the water filter in your Frigidaire refrigerator is an essential maintenance task that ensures clean, fresh-tasting water and ice. The process may seem daunting, but it’s actually quite simple and can be completed in just a few minutes with the right tools and a few simple steps. Whether you’re a seasoned DIY enthusiast or a first-time filter changer, this guide will provide you with everything you need to know to remove the old filter and install a new one, ensuring that your Frigidaire refrigerator continues to deliver the highest quality water and ice for years to come.
To begin the filter replacement process, locate the water filter housing. This is typically found on the top shelf of the refrigerator compartment, behind the top grille or cover. Once you have located the housing, press the release button or lever, which is usually located on the bottom or side of the housing. This will cause the filter to drop down slightly, allowing you to grasp it firmly and pull it straight down and out of the housing. Be sure to hold the filter upright to prevent any water from spilling out.
With the old filter removed, it’s time to install the new one. To do this, simply align the new filter with the housing and push it straight up into place until it clicks securely into position. Once the new filter is in place, run cold water through the dispenser for a few minutes to flush out any air or impurities that may have entered the system during the filter change. This step is essential to ensure the optimal performance of the new filter and to prevent any potential water quality issues.
Locating the Water Filter
First, locate the water filter on your Frigidaire refrigerator. The water filter is typically located on the front of the refrigerator, in the lower grille area, near the bottom. In some models, the water filter may be located inside the refrigerator, behind the lower grille. Consult your refrigerator’s user manual for specific instructions on where the water filter is located on your model.
In some models, the water filter is hidden behind a plastic grille, which you will need to remove in order to access the filter. To remove the grille, locate the small tabs on the sides of the grille and gently press them inward while pulling the grille towards you.
Once you have located the water filter, you are ready to proceed with the next step of removing the water filter.
Cleaning the Filter Housing
To ensure optimal performance of your refrigerator, it’s crucial to regularly clean the filter housing to remove any buildup of impurities. Here are the detailed steps involved:
-
Gather Materials: Prepare a clean cloth, a soft-bristled brush (optional), and a mild cleaning solution (e.g., dish soap and water).
-
Locate the Filter Housing: Identify the location of the filter housing inside the refrigerator. It’s typically located in the upper-left corner of the fresh food compartment.
-
Remove the Filter: Grasp the filter and twist it counterclockwise to detach it from the housing.
-
Clean the Filter: Run the filter under lukewarm water and use a soft brush to remove any debris or buildup. Allow the filter to air dry completely.
-
Clean the Filter Housing:
-
Initial Cleaning: Using a clean cloth dampened with the cleaning solution, wipe down the interior and exterior of the filter housing, including the threads and openings.
-
Deeper Cleaning (Optional): For thorough cleaning, disassemble the filter housing by unscrewing the cap and removing the gasket and O-ring. Soak the disassembled parts in the cleaning solution for 15-20 minutes. Use a soft-bristled brush to remove any stubborn dirt or residue. Rinse and dry all parts thoroughly before reassembling.
- Reinsert the Filter: Once the filter housing is clean and dry, insert the new or cleaned filter into the housing. Twist it clockwise until it clicks into place.
Regular cleaning of the filter housing is essential for maintaining a clean and efficient water filtration system in your Frigidaire refrigerator. By following these steps, you can ensure that your refrigerator delivers safe and refreshing drinking water for your family.
How To Remove Frigidaire Filter
To remove a Frigidaire filter, follow these steps:
- Locate the filter housing. It is usually located in the lower right-hand corner of the refrigerator, behind the kickplate.
- Remove the kickplate by pressing on the tabs on the bottom and lifting it off.
- Locate the filter cap. It is a black plastic cap with a handle on top.
- Turn the filter cap counterclockwise to unlock it.
- Pull the filter straight down to remove it.
- Insert the new filter into the housing, making sure that the arrow on the filter is pointing towards the refrigerator.
- Turn the filter cap clockwise to lock it into place.
- Replace the kickplate.
People Also Ask About How To Remove Frigidaire Filter
How often should I replace my Frigidaire filter?
You should replace your Frigidaire filter every 6 months, or more often if you have hard water.
What happens if I don’t replace my Frigidaire filter?
If you don’t replace your Frigidaire filter, it will become clogged and less effective at removing impurities from your water. This can lead to a decrease in the quality of your water, and it can also damage your refrigerator.
Where can I buy a replacement Frigidaire filter?
You can buy a replacement Frigidaire filter at most home improvement stores, or you can order one online.
-
