The NOCO Boost Plus GB40 is a powerful and portable jump starter that can provide a quick and easy boost to your car’s battery. However, like all batteries, the GB40 needs to be charged in order to function properly. In this article, we will provide you with step-by-step instructions on how to charge your NOCO Boost Plus GB40.
Before you can start charging your GB40, you will need to gather the following items:
– NOCO Boost Plus GB40
– Micro-USB cable
– Power source (e.g., wall outlet, computer, etc.)
Once you have gathered your materials, follow these steps to charge your GB40:
1. Connect the micro-USB cable to the GB40’s charging port.
2. Connect the other end of the micro-USB cable to a power source.
3. The GB40 will begin charging. The LED indicator lights will illuminate to indicate the current charge level.
4. Once the GB40 is fully charged, the LED indicator lights will turn solid green.<
Quick Overview: A Guide to Charging the Noco Boost Plus GB40
The Noco Boost Plus GB40 is a powerful and portable jump starter that can quickly and easily start dead batteries. It’s also equipped with a built-in LED flashlight and USB charging port, making it a versatile tool to have on hand.
To charge the Noco Boost Plus GB40, you will need to connect it to a power source using the included charging cable. The charging time will vary depending on the power source you are using, but it typically takes around 3-4 hours to fully charge the GB40.
Charging Instructions
- Connect the charging cable to the GB40. The charging port is located on the side of the unit.
- Connect the other end of the charging cable to a power source. You can use a wall outlet, a USB port, or a 12-volt car outlet.
- The GB40 will automatically begin charging. The LED lights on the front of the unit will indicate the charging status.
- Once the GB40 is fully charged, the LED lights will turn green. You can then disconnect the charging cable.
Note: You can also charge the GB40 while it is connected to a dead battery. This will allow you to jump-start the battery while the GB40 is still charging.
Charging Times
The following table shows the approximate charging times for the Noco Boost Plus GB40 using different power sources:
| Power Source | Charging Time |
|---|---|
| Wall outlet | 3-4 hours |
| USB port | 6-8 hours |
| 12-volt car outlet | 10-12 hours |
Using the Wall Outlet Method
The second method of charging your NOCO Boost Plus GB40 is through a wall outlet. This method is more convenient than using a 12-volt outlet, as you can charge your GB40 anywhere there is a power outlet. To charge your GB40 using a wall outlet, you will need the following:
- NOCO Boost Plus GB40
- Wall outlet
- USB-C cable (not included)
To charge your GB40 using a wall outlet, follow these steps:
- Connect the USB-C cable to the USB-C port on the GB40.
- Connect the other end of the USB-C cable to a wall outlet.
- The GB40 will begin charging. The LED lights on the GB40 will indicate the charging status.
| LED Light | Charging Status |
|---|---|
| Red | Charging |
| Green | Fully charged |
It takes approximately 3 hours to fully charge the GB40 using a wall outlet. Once the GB40 is fully charged, the green LED light will illuminate. You can then disconnect the GB40 from the wall outlet and use it to jump-start your vehicle.
Charging Through a Vehicle’s 12V Socket
1. Connect the Noco Boost Plus GB40 to the Vehicle
Locate the 12V socket in your vehicle’s interior, usually near the center console or dashboard. Connect the female end of the included 12V car charger cable to the Noco Boost Plus GB40 and the male end to the 12V socket. Ensure the connection is secure.
2. Turn on the Vehicle and Ignition
Start your vehicle’s engine to power the 12V socket. Leave the ignition switch in the “ON” position, even if the vehicle is not running. This will provide a continuous power supply to the Noco Boost Plus GB40.
3. Monitor the Charging Status
The Noco Boost Plus GB40 will automatically start charging once connected to the 12V socket. The device’s LED indicator lights will provide information about the charging status:
| Status | |
|---|---|
| Orange | Charging |
| Green | Fully charged |
| Flashing Red | Error or incompatible connection |
| USB-C Charger Power Output | Charging Time |
|---|---|
| 18W | 3-4 hours |
| 30W | 2-3 hours |
| 45W | 1-2 hours |
USB Charging Options
The NOCO Boost Plus GB40 can be conveniently charged using USB, giving you the flexibility to recharge it in various ways.
USB-C Charging
The GB40 features a USB-C charging port, allowing you to connect it to a USB-C charger or a computer. This option provides fast and efficient charging, typically taking around 3-5 hours depending on the power output of your charger.
USB-A Charging
In addition to USB-C, the GB40 also supports charging via USB-A. You can use a standard USB-A charger or a computer’s USB-A port. While this method is slower than USB-C, it offers wider compatibility with older charging devices.
Charging Time
The charging time of the GB40 depends on the power output of the charger used. The following table provides approximate charging times for different charger types:
| Charger Type | Charging Time |
|---|---|
| USB-C (5V/3A) | 3-5 hours |
| USB-C (9V/2A) | 2-3 hours |
| USB-A (5V/2.4A) | 5-7 hours |
| Computer USB-A (5V/1A) | 10-12 hours |
Battery Status Indicator
During charging, the GB40 will display the battery status through its LED indicators. The number of illuminated LEDs indicates the level of charge: 1-2 LEDs for low, 3-4 LEDs for medium, and 5 LEDs for fully charged.
Determining the Charging Time
The charging time for NOCO Boost Plus GB40 varies depending on the power source used. Here’s a detailed breakdown for different charging scenarios:
| Power Source | Charging Time |
|---|---|
| USB Port (5V, 2.1A) | Up to 12 hours |
| AC Wall Outlet (110-240V) | 2-3 hours |
| 12V Car Outlet | 6-8 hours |
| LiFePO4 Charger | 2-3 hours |
It’s important to use a proper charging cable and power source to ensure optimal charging. Refer to the NOCO Boost Plus GB40 user manual for specific charging instructions.
Monitoring the Charging Status
The NOCO Boost Plus GB40 is equipped with a convenient LED indicator panel that provides real-time feedback on the charging status of the device. These LED indicators are color-coded and display the following information:
1. Power Level Indicator: The GB40 has a digital display that shows the current battery level in percentage. This allows you to easily monitor the remaining charge and plan accordingly.
2. Charging Indicator: When the GB40 is connected to a power source, the charging indicator will illuminate green. This indicates that the device is charging and receiving power.
3. Error Indicator: If the GB40 detects any issues or errors during charging, the error indicator will illuminate red. This could indicate a problem with the power source or a fault within the device itself.
4. Temperature Indicator: The GB40 has a built-in temperature sensor that monitors the device’s internal temperature. If the temperature exceeds a certain threshold, the temperature indicator will illuminate orange to alert you of potential overheating.
5. USB Output Indicator: When the GB40 is providing power to an external device through the USB port, the USB output indicator will illuminate green.
6. Jump-Start Indicator: When the GB40 is connected to a vehicle’s battery and ready to perform a jump-start, the jump-start indicator will illuminate green.
7. Reverse Polarity Indicator: If the GB40 detects reverse polarity when connected to a vehicle’s battery, the reverse polarity indicator will illuminate orange. This is a safety feature to prevent incorrect connection and potential damage to the device or the vehicle.
By closely monitoring the LED indicator panel, you can easily stay informed about the charging status, error conditions, and the readiness of the NOCO Boost Plus GB40 to perform its intended functions.
Safety Precautions During Charging
Check Battery Level
Before charging the NOCO Boost Plus GB40, ensure its battery level is low. Avoid charging a fully charged battery.
Use Compatible Charger
Use the provided NOCO charger specifically designed for the GB40. Using incompatible chargers may damage the battery or charger.
Charge in a Safe Area
Charge the GB40 in a well-ventilated area where sparks or flames are unlikely. Avoid charging near flammable materials.
Avoid Overcharging
Disconnect the GB40 from the charger once fully charged. Overcharging can shorten battery life and pose a safety risk.
Inspect Charger and Cables
Regularly inspect the charger and cables for damage. Do not use damaged components as they can cause electrical hazards.
Monitor Charging
Supervise the GB40 while charging to ensure it does not overheat or experience any unusual behavior.
Store Properly
Store the GB40 and charger in a dry, cool place when not in use. Avoid extreme temperatures, as they can damage the battery or charger.
Charge Duration
The charging time for the NOCO Boost Plus GB40 varies depending on the battery level and charging conditions. Here is an approximate charging duration for different battery levels:
| Battery Level | Charging Duration |
|---|---|
| 0-25% | 2-4 hours |
| 25-50% | 1-2 hours |
| 50-75% | 30-60 minutes |
| 75-100% | 15-30 minutes |
Troubleshooting Charging Issues
If you are having trouble charging your Noco Boost Plus GB40, there are a few things you can check:
1. Check the Power Source
Make sure that the power source you are using is providing enough power. The GB40 requires a minimum of 12V to charge.
2. Check the Charging Cable
Inspect the charging cable for any damage. Make sure that the connectors are clean and free of corrosion.
3. Check the Charging Port
Examine the charging port on the GB40 for any debris or damage. Clean the port if necessary.
4. Test the Battery
Connect the GB40 to a known-good battery. If the GB40 still does not charge, the battery may be faulty.
5. Reset the GB40
To reset the GB40, press and hold the power button for 10 seconds.
6. Update the Firmware
Connect the GB40 to a computer and download the latest firmware update from the Noco website.
7. Contact Noco Customer Support
If you have tried all of the above troubleshooting steps and the GB40 is still not charging, contact Noco customer support for assistance.
8. Charging Light Patterns
| Light Pattern | Status |
|—————– |———- |
| Green pulsing | Charging |
| Green solid | Fully charged |
| Red solid | Error |
9. Common Charging Errors
| Error Code | Cause | Solution |
|————– |——– |——— |
| E01 | Low voltage | Ensure the charging source is providing 12V or higher. |
| E02 | Overvoltage | Disconnect the GB40 from the charging source. |
| E03 | Battery temperature too high | Allow the GB40 to cool down before charging. |
| E04 | Battery temperature too low | Move the GB40 to a warmer environment before charging. |
| E05 | Battery charge error | Contact Noco customer support. |
Optimizing Battery Performance
1. Charge Regularly
To maintain optimal battery health, it is recommended to charge your Noco Boost Plus GB40 after every use or at least once every three months. Avoid deep discharging the battery, as this can significantly shorten its lifespan.
2. Use the Correct Charger
Always use the original Noco charger or a high-quality compatible charger with the correct voltage and amperage. Using an incompatible charger can damage the battery.
3. Charge in a Safe Environment
Charge your GB40 in a well-ventilated area away from flammable materials. Never charge it in direct sunlight or in extreme temperatures.
4. Monitor Battery Temperature
Avoid charging the battery when it is hot or cold. Allow it to cool down or warm up to room temperature before charging.
5. Store Properly
Store your GB40 in a cool, dry place when not in use. Avoid storing it in extreme temperatures or direct sunlight.
6. Check Battery Connections
Ensure that the battery terminals are clean and free of corrosion. Loose or dirty connections can hinder proper charging.
7. Avoid Overcharging
Do not leave your GB40 connected to the charger for extended periods after it is fully charged. Overcharging can reduce battery life.
8. Calibrate the Battery
Periodically, perform a battery calibration to ensure accurate charge readings. This involves discharging the battery completely and then recharging it to its full capacity.
9. Use Battery Savers
Consider using battery savers to minimize power consumption when not in use. Turn off unnecessary features and reduce screen brightness to prolong battery life.
10. Battery Life Expectancy
| Operating Conditions | Battery Life |
|---|---|
| Normal Use | 3-5 years |
| Frequent Fast Charging | 2-3 years |
| Heavy Use and Deep Discharging | 1-2 years |
How to Charge Noco Boost Plus GB40
The Noco Boost Plus GB40 is a powerful jump starter and portable power bank that can quickly and easily jump-start your vehicle or charge your electronic devices. To charge the Noco Boost Plus GB40, follow these steps:
- Connect the included USB-C cable to the USB-C port on the Noco Boost Plus GB40.
- Plug the other end of the USB-C cable into a USB power source, such as a wall outlet or a USB port on your computer.
- The Noco Boost Plus GB40 will begin charging. The LED lights on the front of the device will indicate the charging status.
People Also Ask
How long does it take to charge the Noco Boost Plus GB40?
The charging time for the Noco Boost Plus GB40 will vary depending on the power source used. When charging with a 10W USB charger, the Noco Boost Plus GB40 will fully charge in about 4 hours.
Can I use the Noco Boost Plus GB40 while it is charging?
Yes, you can use the Noco Boost Plus GB40 while it is charging. However, the charging time will be longer if you are using the device while it is charging.
How long will the Noco Boost Plus GB40 hold a charge?
The Noco Boost Plus GB40 will hold a charge for up to 1 year.
