The Bissell Proheat Pet Turbo is a powerful carpet cleaner that is designed to remove pet hair, dander, and other allergens from your carpets. It features a large capacity tank, a powerful suction motor, and a variety of attachments that make it easy to clean all types of carpets. In this article, we will provide you with a step-by-step guide on how to use the Bissell Proheat Pet Turbo.
Before you begin using the Bissell Proheat Pet Turbo, it is important to assemble the machine and prepare the cleaning solution. To assemble the machine, simply attach the handle to the base and then insert the tank into the base. To prepare the cleaning solution, mix 1 gallon of hot water with 4 ounces of Bissell Proheat Pet Turbo cleaning solution. Once the machine is assembled and the cleaning solution is prepared, you are ready to begin cleaning your carpets.
To clean your carpets, simply fill the tank with the cleaning solution and then select the desired cleaning mode. The Bissell Proheat Pet Turbo offers three cleaning modes: Express Clean, Deep Clean, and Rinse Only. The Express Clean mode is designed for quick and easy cleaning, while the Deep Clean mode is designed for deep cleaning of heavily soiled carpets. The Rinse Only mode is used to rinse your carpets after deep cleaning. Once you have selected the desired cleaning mode, simply press the trigger on the handle to start cleaning. The Bissell Proheat Pet Turbo will automatically dispense the cleaning solution and water onto the carpet, and then it will use its powerful suction motor to remove the dirt and debris. As you clean, be sure to overlap your strokes to ensure that all areas of the carpet are cleaned evenly.
Assembling the Bissell Proheat Pet Turbo
Unboxing the Bissell Proheat Pet Turbo
Once you have unpacked the Bissell Proheat Pet Turbo from its box, you will find the following components:
– The machine base
– The handle assembly
– The water tank
– The detergent tank
– The cleaning head
– The pet hair tool
Before you begin assembling the Bissell Proheat Pet Turbo, make sure that all of the components are present and that none of them are damaged. If any of the components are missing or damaged, do not use the machine and contact Bissell customer service.
To assemble the Bissell Proheat Pet Turbo, follow these steps:
1. Attach the handle assembly to the machine base. To do this, align the handle assembly with the machine base and push it down until it clicks into place.
2. Insert the water tank into the machine base. To do this, lift the water tank lid and fill the tank with clean, cold water. Then, insert the water tank into the machine base and push it down until it clicks into place.
3. Insert the detergent tank into the machine base. To do this, lift the detergent tank lid and fill the tank with Bissell Pet Pro Oxy formula. Then, insert the detergent tank into the machine base and push it down until it clicks into place.
4. Attach the cleaning head to the handle assembly. To do this, align the cleaning head with the handle assembly and push it down until it clicks into place.
5. Attach the pet hair tool to the cleaning head. To do this, align the pet hair tool with the cleaning head and push it down until it clicks into place.
Filling the Clean Water Tank
To fill the clean water tank on your Bissell Proheat Pet Turbo, follow these steps:
1. Preparation
Before filling the tank, ensure that the machine is unplugged and the power cord is disconnected from the outlet. Locate the clean water tank on the back of the machine, which is usually marked with a blue or clear lid.
2. Removing the Fill Cap
The fill cap is located on the top of the clean water tank. To remove it, twist it counterclockwise until it pops open. Some models may have a latch that you need to release before twisting.
3. Filling the Tank
Insert the end of your water hose or a pitcher into the fill opening. Fill the tank with hot water (140-160°F/60-71°C) to the “Max” fill line. Do not overfill the tank.
4. Cleaning Formula
Add the required amount of Bissell cleaning formula to the water according to the instructions on the formula bottle. Using too much formula can cause the machine to foam excessively.
5. Replacing the Fill Cap
Once the tank is filled, screw the fill cap back onto the tank by twisting it clockwise until it is securely tightened. Ensure that the cap is not loose, as this may cause water to leak during operation.
Adding the Cleaning Solution
Follow these detailed steps to effectively add the cleaning solution to your Bissell Proheat Pet Turbo:
1. Fill the Clean Water Tank
Remove the Clean Water Tank from the machine and fill it with clean, hot tap water up to the “Max” fill line.
2. Measure the Cleaning Solution
Refer to the cleaning instructions provided with your Bissell cleaning solution. Measure the recommended amount of cleaning solution (typically 1-2 ounces) into the small cup provided.
3. Pour the Cleaning Solution into the Formula Tank
Remove the Formula Tank from the machine. Locate the opening on the top and pour the measured cleaning solution into the tank. Replace the Formula Tank.
Additional Tips:
- Use the cleaning solution specifically formulated for Bissell Proheat Pet Turbo.
- Do not use vinegar or other cleaning agents as they may damage the machine.
- Never exceed the recommended amount of cleaning solution, as it can cause excessive foaming.
- Use a spoon or scoop to avoid pouring too much solution into the Formula Tank.
- Keep the cleaning solution out of reach of children and pets.
Once you have added the cleaning solution, you can proceed to the next step of cleaning your carpets or other surfaces.
| Step | Action |
|---|---|
| 1 | Remove the Clean Water Tank. |
| 2 | Fill the tank with clean, hot tap water. |
| 3 | Measure and add the cleaning solution to the Formula Tank. |
| 4 | Replace the Formula Tank. |
Choosing the Correct Cleaning Mode
The Bissell Proheat Pet Turbo offers three cleaning modes to accommodate different types of messes and surfaces.
Express Clean Mode
This mode is ideal for quick cleanups or touch-ups. It uses less water and detergent, making it less likely to saturate carpets or leave a residue.
Deep Clean Mode
This mode provides a comprehensive clean, using more water and detergent. It effectively removes dirt, dander, and odors, leaving your carpets feeling refreshed and rejuvenated.
Rinse Only Mode
This mode allows you to rinse your carpets without applying any detergent. It’s helpful for removing residual detergent or pet urine stains.
| Cleaning Mode | Recommended Use | Water and Detergent Usage |
|---|---|---|
| Express Clean Mode | Quick cleanups, touch-ups | Less water and detergent |
| Deep Clean Mode | Comprehensive clean | More water and detergent |
| Rinse Only Mode | Removing residual detergent or pet urine stains | No detergent |
Attaching the Cleaning Tools
Attaching the cleaning tools is essential for getting the most out of your Bissell Proheat Pet Turbo. Here’s a step-by-step guide to help you do it correctly:
1. Attach the Carpet Cleaning Tool
Align the carpet cleaning tool with the base of the machine. Slide the tool onto the base until it snaps into place.
2. Attach the Upholstery Cleaning Tool
Insert the upholstery cleaning tool into the designated port on the front of the machine. Push it in until it locks in place.
3. Attach the Bare Floor Cleaning Tool
Slide the bare floor cleaning tool onto the base of the machine. Ensure that the tool is fully seated and secure.
4. Attach the Crevice Tool
Insert the crevice tool into the small opening on the front of the machine. Ensure that it is securely attached.
5. Attaching the Stair Tool (Optional)
The stair tool is not included with all Bissell Proheat Pet Turbo models. If your model comes with it, follow these steps:
| Step | Description |
|---|---|
| 1. | Connect the stair tool to the extension wand. |
| 2. | Insert the extension wand into the designated port on the front of the machine. |
| 3. | Ensure that all connections are secure. |
Operating the Bissell Proheat Pet Turbo
Using the Bissell Proheat Pet Turbo is designed to be user-friendly, here’s a step-by-step guide to help you get started:
1. Fill the Clean Water Tank
Remove the clean water tank and fill it with hot tap water to the designated line. Do not use boiling water.
2. Add Cleaning Solution
Pour the recommended amount of Bissell Pet Pro Oxy cleaning solution into the tank.
3. Attach the Upholstery Tool (Optional)
If you’re cleaning furniture, attach the upholstery tool to the end of the hose.
4. Select the Surface Setting
Choose the appropriate surface setting for the area you’re cleaning: Hard Floor, Carpet, or Upholstery.
5. Turn on the Machine
Plug in the machine and press the power button to start it up.
6. Cleaning with the Proheat Pet Turbo
Slowly move the machine back and forth over the surface you’re cleaning. The machine will automatically dispense the cleaning solution and extract the dirt. Repeat the process until the surface is clean and dry to the touch.
| Surface | Cleaning Method |
|---|---|
| Hard Floor | Use the Hard Floor brush head and make “S” motions across the surface. |
| Carpet | Use the Carpet brush head and make slow, overlapping passes over the area. |
| Upholstery | Attach the Upholstery tool and use slow, gentle strokes on the fabric. Avoid over-saturating. |
Cleaning the Pet Turbo Brush Roll
The Pet Turbo Brush Roll is an optional attachment for the Bissell Proheat Pet Turbo, designed specifically for removing pet hair and debris from carpets and upholstery. To ensure optimal performance, it’s crucial to clean the brush roll regularly.
Follow these steps to clean the Pet Turbo Brush Roll:
1. Unclip the Brush Roll
Locate the two latches on the side of the vacuum cleaner. Press the latches simultaneously to release the brush roll.
2. Remove the Brush Roll
Pull the brush roll straight out of the cleaner.
3. Inspect the Brush Roll
Examine the brush roll for any visible debris, such as pet hair, dirt, or carpet fibers.
4. Remove Debris by Hand
Use your fingers or a pair of scissors to remove any loose debris from the brush roll.
5. Rinse the Brush Roll
Hold the brush roll under warm running water, using your fingers to gently remove any remaining debris.
6. Use a Cleaning Solution
If necessary, apply a small amount of gentle dish soap or upholstery cleaner to a damp cloth and wipe down the brush roll.
7. Rinse and Dry the Brush Roll Thoroughly
Thoroughly rinse the brush roll with clean water to remove any residual cleaning solution. Allow it to air dry completely before reinstalling it.
| Cleaning Frequency | Recommended Usage |
|---|---|
| Daily | For households with pets that shed heavily |
| Weekly | For households with moderate pet shedding |
| Monthly | For households with minimal pet shedding |
Emptying the Dirty Water Tank
After cleaning, it’s crucial to empty the dirty water tank to prevent odors and maintain the vacuum’s optimal performance.
-
Unplug the Bissell Proheat Pet Turbo from the power outlet.
-
Locate the dirty water tank, typically situated on the front or back of the machine.
-
Firmly grasp the tank’s handle and pull it straight up to detach it from the vacuum.
-
Carry the tank to a sink or designated disposal area.
-
Remove the rubber stopper from the bottom of the tank.
-
Pour the dirty water into the sink or disposal system.
-
Use clean water to rinse the tank thoroughly.
-
Reinstall the rubber stopper firmly into the bottom of the tank.
-
Reattach the dirty water tank to the vacuum by aligning it with the designated slot and pushing it down until it clicks into place.
Cleaning the Drain Nozzle
The drain nozzle is located on the bottom of the machine. It is important to clean the drain nozzle regularly to prevent clogs. To clean the drain nozzle, follow these steps:
1. Unplug the machine from the electrical outlet.
2. Remove the water tank from the machine.
3. Turn the machine upside down.
4. Locate the drain nozzle.
5. Use a small brush or a toothpick to remove any debris from the drain nozzle.
6. Rinse the drain nozzle with clean water.
7. Reattach the water tank to the machine.
8. Plug the machine back into the electrical outlet.
9. To clean the drain nozzle thoroughly, you can use a mixture of hot water and white vinegar. Pour the mixture into the drain nozzle and let it sit for 10 minutes. Then, use a small brush or a toothpick to remove any remaining debris. Rinse the drain nozzle with clean water.Troubleshooting Common Issues
1. My Bissell Proheat Pet Turbo is not working
If your Bissell Proheat Pet Turbo is not working, there are a few things you can check.
- **Is the power cord plugged in?** Make sure that the power cord is securely plugged into an outlet and that the outlet is working.
- **Is the water tank empty?** If the water tank is empty, the machine will not be able to produce steam.
- **Are the filters dirty?** If the filters are dirty, they can restrict the airflow and prevent the machine from working properly.
- **Is the brush roll jammed?** If the brush roll is jammed, it can prevent the machine from moving forward.
- **Is the belt broken?** If the belt is broken, the machine will not be able to rotate the brush roll.
2. My Bissell Proheat Pet Turbo is leaking water
If your Bissell Proheat Pet Turbo is leaking water, there are a few things you can check.
- **Is the water tank overfilled?** If the water tank is overfilled, water can leak out of the top of the machine.
- **Is the water tank lid not properly sealed?** If the water tank lid is not properly sealed, water can leak out of the sides of the machine.
- **Is the hose cracked or damaged?** If the hose is cracked or damaged, water can leak out of the hose.
- **Is the pump leaking water?** If the pump is leaking water, it will need to be replaced.
3. My Bissell Proheat Pet Turbo is not vibrating
If your Bissell Proheat Pet Turbo is not vibrating, there are a few things you can check.
- **Is the vibration mode turned on?** Make sure that the vibration mode is turned on in the control panel.
- **Is the brush roll vibrating?** Check to see if the brush roll is vibrating. If it is not, the motor may need to be replaced.
- **Is the belt broken?** If the belt is broken, the motor will not be able to rotate the brush roll.
4. My Bissell Proheat Pet Turbo is not suctioning properly
If your Bissell Proheat Pet Turbo is not suctioning properly, there are a few things you can check.
- **Is the dirt tank full?** If the dirt tank is full, it can restrict the airflow and prevent the machine from suctioning properly.
- **Is the filter dirty?** If the filter is dirty, it can restrict the airflow and prevent the machine from suctioning properly.
- **Is the hose clogged?** If the hose is clogged, it can restrict the airflow and prevent the machine from suctioning properly.
- **Is the motor not working properly?** If the motor is not working properly, it will not be able to generate suction.
5. My Bissell Proheat Pet Turbo is not heating up
If your Bissell Proheat Pet Turbo is not heating up, there are a few things you can check.
- **Is the water tank empty?** If the water tank is empty, the machine will not be able to produce steam.
- **Is the heater element clogged?** If the heater element is clogged, it will not be able to heat the water.
- **Is the thermostat defective?** If the thermostat is defective, it will not be able to regulate the temperature of the water.
- **Is the motor not working properly?** If the motor is not working properly, it will not be able to generate heat.
6. My Bissell Proheat Pet Turbo is making a strange noise
If your Bissell Proheat Pet Turbo is making a strange noise, there are a few things you can check.
- **Is the brush roll hitting something?** If the brush roll is hitting something, it can make a rattling noise.
- **Is the belt loose?** If the belt is loose, it can make a squealing noise.
- **Is the pump not working properly?** If the pump is not working properly, it can make a humming noise.
- **Is the motor not working properly?** If the motor is not working properly, it can make a grinding noise.
7. My Bissell Proheat Pet Turbo is not picking up dirt
If your Bissell Proheat Pet Turbo is not picking up dirt, there are a few things you can check.
- **Is the brush roll rotating?** If the brush roll is not rotating, it will not be able to pick up dirt.
- **Is the suction hose clogged?** If the suction hose is clogged, it will not be able to pick up dirt.
- **Is the filter dirty?** If the filter is dirty, it can restrict the airflow and prevent the machine from picking up dirt.
- **Is the motor not working properly?** If the motor is not working properly, it will not be able to generate suction.
8. My Bissell Proheat Pet Turbo is leaving streaks on my carpet
If your Bissell Proheat Pet Turbo is leaving streaks on your carpet, there are a few things you can check.
- **Is the water tank dirty?** If the water tank is dirty, it can leave streaks on your carpet.
- **Is the detergent tank empty?** If the detergent tank is empty, the machine will not be able to dispense detergent, which can leave streaks on your carpet.
- **Is the nozzle clogged?** If the nozzle is clogged, it can restrict the flow of water and detergent, which can leave streaks on your carpet.
- **Is the brush roll dirty?** If the brush roll is dirty, it can leave streaks on your carpet.
9. My Bissell Proheat Pet Turbo is not dispensing detergent
If your Bissell Proheat Pet Turbo is not dispensing detergent, there are a few things you can check.
- **Is the detergent tank empty?** If the detergent tank is empty, the machine will not be able to dispense detergent.
- **Is the detergent dispenser clogged?** If the detergent dispenser is clogged, the detergent will not be able to flow out of the machine.
- **Is the detergent hose clogged?** If the detergent hose is clogged, the detergent will not be able to flow out of the machine.
- **Is the motor not working properly?** If the motor is not working properly, it will not be able to dispense detergent.
10. My Bissell Proheat Pet Turbo is not turning off
If your Bissell Proheat Pet Turbo is not turning off, there are a few things you can check.
Possible Cause Solution The power cord is not plugged in Plug the power cord into an outlet The power switch is not turned off Turn the power switch to the off position The motor is seized Have the motor replaced by a qualified technician The circuit breaker has tripped Reset the circuit breaker Bissell Proheat Pet Turbo: A Comprehensive Guide to Its Usage
The Bissell Proheat Pet Turbo is a powerful cleaning machine designed to address the specific cleaning challenges faced by pet owners. Its advanced features and innovative design make it a valuable asset for homes with furry companions. Here’s a step-by-step guide on how to effectively use the Bissell Proheat Pet Turbo:
- Prepare the Solution: Fill the clean water tank with the provided Bissell formula. Avoid using household detergents or other chemicals, as they can damage the machine.
- Attach the Tool: Select the appropriate cleaning tool for your surface (e.g., brush roll for carpets, upholstery tool for furniture). Secure it to the machine’s nozzle.
- Test in an Inconspicuous Area: Before cleaning a large area, test the solution and cleaning tool on an inconspicuous spot to ensure compatibility.
- Clean: Slowly move the machine over the surface, pressing the trigger to release the cleaning solution. Avoid over-saturating the area.
- Rinse: After cleaning, switch to the clean water setting and rinse the area thoroughly. This will extract the dirty water and solution.
- Empty the Dirty Water Tank: Once the rinse cycle is complete, empty the dirty water tank and refill it with clean water for the next cleaning session.
People Also Ask About Bissell Proheat Pet Turbo How To Use
How Do I Resolve a Clogged Nozzzle?
If the nozzle becomes clogged, follow these steps to unclog it:
- Turn off and unplug the machine.
- Remove the cleaning tool from the nozzle.
- Use a paperclip or toothpick to gently remove any debris or hair that may be blocking the nozzle holes.
- Reattach the cleaning tool and test the nozzle by pressing the trigger.
Can I Use the Bissell Proheat Pet Turbo on Hard Floors?
Yes, you can use the Bissell Proheat Pet Turbo on hard floors. However, it’s advisable to use the hard floor tool to avoid scratching or damaging the surface.
How Often Should I Clean My Bissell Proheat Pet Turbo?
For optimal performance, it’s recommended to clean the Bissell Proheat Pet Turbo after each use. This involves emptying the dirty water tank, refilling the clean water tank, and rinsing the machine thoroughly by following the steps outlined above.
