The Hisense Tv U8n is a great TV, but it can be frustrating when you can’t figure out how to turn it off. There are a few different ways to turn off the Hisense Tv U8n, and the method you use will depend on the model of your TV. In this article, we will show you how to turn off the Hisense Tv U8n using the remote control, the power button, and the voice control feature.
The most common way to turn off the Hisense Tv U8n is to use the remote control. To do this, simply point the remote control at the TV and press the power button. The TV will turn off within a few seconds. If you don’t have the remote control, you can also turn off the TV using the power button on the back of the TV. To do this, simply locate the power button and press it. The TV will turn off within a few seconds.
If you have a Hisense Tv U8n with voice control, you can also use the voice control feature to turn off the TV. To do this, simply say “Turn off the TV” into the remote control. The TV will turn off within a few seconds. The voice control feature is a great way to turn off the TV if you don’t have the remote control or if you’re too lazy to get up and press the power button.
Disable Auto Power On
1. Disable Auto Power On by General Settings
This is the most straightforward method to disable the Auto Power On feature on your Hisense U8N TV. Here are the detailed steps:
- Press the “Menu” button on your TV remote.
- Navigate to “Settings” using the arrow keys, and then press “OK”.
- Select “General Settings” and then press “OK”.
- Scroll down to “Auto Power On” and set it to “Off”.
- Press “OK” to confirm your selection.
By following these steps, you will disable the Auto Power On feature, preventing your TV from turning on automatically at certain times.
2. Disable Auto Power On by Using CEC Settings
Another way to disable Auto Power On is through the Consumer Electronics Control (CEC) settings. CEC allows you to control multiple devices connected to your TV with a single remote.
- Press the “Menu” button on your TV remote.
- Navigate to “Settings” using the arrow keys, and then press “OK”.
- Select “Advanced Settings” and then press “OK”.
- Select “CEC” and then press “OK”.
- Set “CEC Auto Power On” to “Off”.
- Press “OK” to confirm your selection.
This method will disable Auto Power On for all devices connected to your TV via CEC.
3. Disable Auto Power On by Using the Remote Control
If you don’t want to go through the menu settings, you can also disable Auto Power On using the remote control. Here’s how:
- Press the “Power” button on your TV remote to turn off your TV.
- Press and hold the “Power” button for 5 seconds until the TV turns back on.
- Release the “Power” button.
- Press the “Source” button on your remote control.
- Select the input that you want to use.
- Press the “OK” button to confirm your selection.
This method will disable Auto Power On until you turn off your TV manually again.
Turn Off Backlight
If you want to turn off the TV without turning off the sound, you can turn off the backlight. This way, you can still listen to the audio while the screen is off.
- Press the Home button on the remote control.
* The Home menu will appear on the TV screen.
- Use the navigation buttons on the remote control to highlight the Settings icon.
* The Settings menu will appear on the TV screen.
- Use the navigation buttons on the remote control to highlight the System option.
* The System menu will appear on the TV screen.
- Use the navigation buttons on the remote control to highlight the Backlight option.
* The Backlight menu will appear on the TV screen.
- Use the navigation buttons on the remote control to highlight the Off option.
* The backlight will turn off.
Power Down the TV Remotely
If you misplace the remote, or if it malfunctions, you can still turn off the Hisense TV U80N without it. Here’s how:
- Locate the power button on the back or side of the TV.
- Press and hold the power button for about five seconds.
- The TV will turn off after a few moments.
Using the TV Menu
Alternatively, you can use the TV menu to turn off the Hisense TV U80N remotely.
- Press the “Menu” button on the TV remote.
- Navigate to the “Settings” menu.
- Select the “Power” option.
- Choose the “Power Off” option.
- Press the “OK” button to turn off the TV.
Using the Remote Finder Feature
If you have the Hisense remote control app installed on your smartphone, you can use its “Remote Finder” feature to locate the misplaced remote and turn off the TV using the virtual remote.
- Open the Hisense remote control app on your smartphone.
- Tap on the “Remote Finder” icon.
- The app will emit a sound to help you locate the remote.
- Once you find the remote, press the “Power” button to turn off the TV.
Deactivate Network Standby
To prevent your Hisense TV U8n from automatically turning on when a network signal is detected, you can disable the Network Standby feature. Here’s how:
Step 1: Access the TV Menu
Press the “Home” button on your remote control to open the TV menu.
Navigate to the “Settings” tab.
Select the “Network” option.
Step 2: Disable Network Standby
Under the “Network Settings” menu, locate the “Network Standby” option.
Toggle the switch to the “Off” position.
Step 3: Confirm Deactivation
Your Hisense TV U8n will now be set to turn off completely when you press the power button. It will no longer respond to network signals and turn on automatically.
Adjust Auto Turn Off Timer
The Hisense Tv U8n has an Auto Turn Off feature that can be set to turn the TV off after a specified period of time. This can be useful if you want to fall asleep to the TV without having to worry about turning it off manually. To adjust the Auto Turn Off timer, follow these steps:
-
Press the "Menu" button on the TV remote control.
-
Select the "Settings" option.
-
Select the "System" option.
-
Select the "Auto Turn Off" option.
-
Use the arrow keys on the remote control to adjust the Auto Turn Off timer. You can choose from the following options:
- Off: The TV will not turn off automatically.
- 15 minutes: The TV will turn off automatically after 15 minutes of inactivity.
- 30 minutes: The TV will turn off automatically after 30 minutes of inactivity.
- 60 minutes: The TV will turn off automatically after 60 minutes of inactivity.
- 90 minutes: The TV will turn off automatically after 90 minutes of inactivity.
Once you have selected the desired Auto Turn Off timer setting, press the “Enter” button on the remote control to save your changes.
Unplug the Power Cord
If you want to completely turn off your Hisense TV U8n, you can unplug the power cord from the electrical outlet. This will cut off all power to the TV and prevent it from turning on accidentally. To unplug the power cord, simply grasp the plug and pull it straight out of the outlet.
Here are some additional details to keep in mind when unplugging the power cord:
- Make sure that the TV is turned off before unplugging the power cord. This will help to prevent any damage to the TV.
- Do not unplug the power cord while the TV is turned on. This could cause damage to the TV.
- If you are going to be away from home for an extended period of time, it is a good idea to unplug the power cord from the electrical outlet. This will help to prevent any damage to the TV from power surges or other electrical problems.
| Advantages of Unplugging the Power Cord | Disadvantages of Unplugging the Power Cord |
|---|---|
|
|
Perform a Soft Reset
A soft reset, also known as a power cycle, is a simple yet effective way to restart your Hisense TV U8n and potentially resolve minor issues. Follow these steps to perform a soft reset:
- Press and hold the power button on the TV or remote control for about 5 seconds.
- The TV will turn off and then back on automatically within a few minutes.
- Once the TV has fully restarted, check if the issue has been resolved.
| Alternative Method | Steps |
|---|---|
| Using the Remote |
1. Press the “Menu” button on the remote control. 2. Navigate to “Settings” > “System” > “Reset” 3. Select “Restart TV” or “Soft Reset” and confirm. |
| Unplug and Replug |
1. Unplug the TV from the power outlet. 2. Wait for at least 30 seconds. 3. Plug the TV back in and turn it on. |
Unplug the TV
The most straightforward way to turn off a Hisense TV U8n is to unplug it from the power outlet. This will completely cut off the power to the TV and turn it off.
Use the remote control
If you have the remote control for your Hisense TV U8n, you can use it to turn off the TV. Simply point the remote control at the TV and press the power button.
Use the power button on the TV
If you don’t have the remote control, you can use the power button on the TV to turn it off. The power button is usually located on the back or side of the TV.
Use the CEC feature
If your TV is connected to a CEC-enabled device, such as a Blu-ray player or game console, you can use the CEC feature to turn the TV off. To do this, simply turn off the CEC-enabled device and the TV will automatically turn off.
Use the auto power off feature
The Hisense TV U8n has an auto power off feature that can be used to turn the TV off automatically after a period of inactivity. To enable this feature, go to the TV’s menu and select the “Energy saving” option. Then, select the “Auto power off” option and set the desired time.
Use the voice control feature
If your Hisense TV U8n has voice control capabilities, you can use the voice control feature to turn the TV off. To do this, simply say “Hey Google, turn off the TV” or “Alexa, turn off the TV.”
Contact Customer Support
If you’re still having trouble turning off your Hisense TV U8n, you can contact customer support for assistance. Customer support can be reached by phone at 1-888-935-8880 or by email at support@hisense-usa.com.
Additional Tips
Here are a few additional tips for turning off your Hisense TV U8n:
- If the TV is unresponsive, try unplugging it from the power outlet for 30 seconds and then plugging it back in.
- If the TV is still unresponsive, try pressing and holding the power button on the TV for 10 seconds.
- If you’re still having trouble, contact customer support for assistance.
Troubleshoot Black Screen Issues
If your Hisense TV U8n is experiencing a black screen, there are several potential causes and solutions to consider.
1. Power Source:
Ensure that the TV is properly plugged into a power outlet and that the outlet is functioning.
2. Input Source:
Check that the correct input source is selected on the TV. Use the remote to switch between input sources and verify if the black screen persists.
3. HDMI Cable:
If you are using an HDMI cable, ensure that it is securely connected to both the TV and the source device. Try using a different HDMI cable or input to isolate the issue.
4. Restart:
Unplug the TV from the power outlet and wait 60 seconds. Plug the TV back in and turn it on to see if the black screen is resolved.
5. Backlight:
The TV’s backlight may be malfunctioning. Shine a flashlight at the screen to see if you can faintly see the image. If so, the backlight may need to be replaced.
6. Firmware:
Ensure that the TV has the latest firmware. Outdated firmware can cause compatibility issues or display problems.
7. Factory Reset:
A factory reset can resolve software problems that may be causing the black screen. Refer to the TV’s user manual for specific instructions.
8. Contact Support:
If the above steps do not resolve the issue, contact Hisense customer support for further assistance. They may provide additional troubleshooting steps or arrange for repair or replacement.
Part |
Estimated Cost |
|---|---|
| Backlight | $100-$250 |
| Main Board | $200-$500 |
| Power Supply | $50-$200 |
Reset to Factory Settings
There may be times when you need to reset your Hisense U8N TV to its factory settings. This can be necessary if you are experiencing problems with the TV, or if you want to start over with a fresh slate. Resetting the TV to factory settings will erase all of your personal settings, so it is important to back up any important data before you proceed.
To reset your Hisense U8N TV to factory settings, follow these steps:
| 1. | Press the “Settings” button on your remote control. |
|---|---|
| 2. | Select “System” from the menu. |
| 3. | Select “Reset & Admin.” from the menu. |
| 4. | Select “Factory Reset” from the menu. |
| 5. | Enter your TV’s password. The default password is “0000.” |
| 6. | Select “OK” to confirm the reset. |
| 7. | The TV will now reset to factory settings. This process may take a few minutes. |
| 8. | Once the reset is complete, the TV will automatically restart. |
| 9. | You will now need to set up the TV again, including setting up your Wi-Fi connection and your preferred picture and sound settings. |
| 10. | If you are having trouble resetting your TV to factory settings using the remote control, Alternatively, you can also reset the TV by using the buttons on the back of the TV.
|
