The Armitron digital watch is a popular and affordable timepiece that is known for its durability and reliability. However, one of the most common questions that users have is how to change the time on the watch. If you are one of those users, then you are in luck, as adjusting the time on an Armitron digital watch is a relatively simple process, and this guide will lead you through it, explaining everything you need to know in both a clear and concise manner. It’s worth noting that the process can vary slightly depending on the model of your watch, but the general steps will be similar.
First, you need to locate the “Mode” button on your watch. This button is typically located on the side of the watch, and it is used to cycle through the different modes of the watch, such as time, date, and alarm. Once you have found the “Mode” button, press it until you reach the timekeeping mode. This mode will be indicated by a time display on the watch’s face. Next, you will need to press the “Adjust” button, which is typically located on the other side of the watch. This button will allow you to adjust the time on the watch.
Once you have pressed the “Adjust” button, you will be able to use the “Up” and “Down” buttons to adjust the time. The “Up” button will increase the time, while the “Down” button will decrease the time. Once you have set the correct time, press the “Adjust” button again to save your changes. Finally, press the “Mode” button again to exit the timekeeping mode. That’s it! Now you know how to change the time on your Armitron digital watch. It’s a simple process that should only take a few seconds to complete.
Understanding the Armitron Digital Watch’s Time Display
Armitron digital watches typically display the time in a 12-hour or 24-hour format, with the hours, minutes, and seconds separated by colons or dashes. The time display may also include additional information, such as the day of the week, date, alarm, or stopwatch function.
The specific time display format will vary depending on the watch model. However, most Armitron digital watches will have the following basic layout:
| Position | Display |
|---|---|
| Left-most digits | Hours (12-hour or 24-hour format) |
| Middle digits | Minutes |
| Right-most digits | Seconds |
Some Armitron digital watches also have a small “PM” or “AM” indicator to the left of the hours display, indicating whether the time is in the afternoon or the morning. Additionally, many models feature a “military time” mode, which displays the time in a 24-hour format without the AM/PM indicator.
To change the time display format on your Armitron digital watch, consult the watch’s user manual for specific instructions. Typically, you will need to press and hold a button for a few seconds to enter the time setting mode, then use the other buttons to adjust the hours, minutes, seconds, and other settings as desired.
Identifying the Time Adjustment Buttons
Most Armitron digital watches have two buttons located on the right-hand side of the watch, labeled “A” and “B.” These buttons are used to adjust the time, date, and other settings on the watch.
To identify the time adjustment buttons, look for the following button labels:
| Button Label | Function |
|---|---|
| A | Adjusts the hours |
| B | Adjusts the minutes |
Some Armitron digital watches may also have a third button labeled “C.” This button is typically used to adjust the seconds, but it can also be used to switch between different display modes.
Entering Time Adjustment Mode
To enter time adjustment mode on an Armitron digital watch, follow these steps:
1. Check the Button Labels
Armitron watches typically have four buttons labeled “A,” “B,” “C,” and “D.” Their functions may vary depending on the model.
2. Identify the “Mode” Button
Locate the button labeled “Mode” or “Select.” This button is typically used to switch between different modes, including time adjustment.
3. Press and Hold “Mode” or “Select”
Hold down the “Mode” or “Select” button for several seconds until the time display begins to flash. This indicates that you have entered time adjustment mode.
| Model | Button |
|---|---|
| Standard Armitron | “Mode” or “Select” |
| Armitron Sport | “C” |
| Armitron Advance | “B” |
Changing the Hours
To change the hours on your Armitron digital watch, follow these steps:
- Press and hold the “SET” button for about two seconds. The hour digits will start flashing.
- Use the “+” and “-” buttons to adjust the hours. Press the “+” button to advance the hours, and press the “-” button to decrease the hours.
- Press the “SET” button again to save the new hours setting.
4. Troubleshooting Common Time-Setting Issues
If you encounter any issues while changing the time on your Armitron digital watch, try the following troubleshooting steps:
| Problem | Possible Cause and Solution |
|---|---|
| The hour digits are not flashing when I press the “SET” button. | The watch may be in a different mode. Press the “MODE” button repeatedly until you enter the time-setting mode. |
| The “+” and “-” buttons are not working. | The battery may be weak. Replace the battery and try again. |
| The new time setting is not saved when I press the “SET” button. | The “SET” button may not have been held down long enough. Press and hold the “SET” button for at least two seconds to save the new setting. |
Setting the Minutes
Step 5: Setting the Minutes
Now, you’ll need to adjust the minutes. Press the “Mode” button repeatedly until the minutes start blinking. Use the “Adjust” buttons to change the minutes. If you hold down the “Adjust” buttons, the minutes will quickly scroll through. Press the “Mode” button to save your changes.
Here’s a table summarizing the steps:
| Step | Action |
|---|---|
| 1 | Press “Mode” until minutes blink |
| 2 | Press “Adjust” to change minutes |
| 3 | Hold “Adjust” to scroll minutes faster |
| 4 | Press “Mode” to save |
Selecting the 12-Hour or 24-Hour Format:
Armitron digital watches offer the flexibility to choose between the 12-hour (AM/PM) and 24-hour (military time) formats. Follow these detailed steps to adjust the time format:
1. Enter Timekeeping Mode:
Long-press the “Mode” button until the timekeeping mode is displayed, which typically indicates the current time.
2. Access the Time Setting Menu:
Press the “Set” button once to enter the time setting menu. This will usually show flashing digits for the hours.
3. Select Time Format:
Short-press the “Mode” button repeatedly to cycle through the available time formats. You should see “12H” for the 12-hour format and “24H” for the 24-hour format.
4. Confirm Selection:
Once the desired time format is displayed, long-press the “Set” button to confirm your selection. The watch will switch to the selected time format.
5. Adjust Time:
If necessary, use the “Adjust” buttons to adjust the hours, minutes, and seconds to the correct time. Long-press the “Adjust” buttons to advance the digits quickly.
6. Exit Timekeeping Mode:
Once the time is adjusted, short-press the “Mode” button to exit the timekeeping mode. The watch will now display the time in the selected format.
| Time Format | Display |
|---|---|
| 12-Hour (AM/PM) | 12:00 AM – 11:59 PM |
| 24-Hour (Military Time) | 00:00 – 23:59 |
Adjusting the Seconds (Optional)
While most digital watches do not allow you to adjust the seconds, some advanced models may provide this option. If your Armitron digital watch has this feature, you can set the seconds as follows:
- Press and hold the “Mode” button until you enter the “Timekeeping” mode.
- Press the “Adjust” button repeatedly until the seconds start flashing.
- Use the “Forward” or “Back” buttons to adjust the seconds to the desired value.
- Press the “Adjust” button again to save the changes.
- Repeat steps 2-4 to adjust the minutes and hours as well.
- Once all the time settings are correct, press the “Mode” button to exit the “Timekeeping” mode.
- Note that adjusting the seconds may affect the accuracy of your watch over time, as it may introduce slight errors in the timekeeping mechanism.
Adjusting the Time on an Armitron Digital Watch
Adjusting the time on an Armitron digital watch is a simple process that can be completed in a few steps. Follow the instructions below to set the correct time on your watch.
Step 1: Enter Adjustment Mode
To enter adjustment mode, press and hold the “Mode” button for about 3 seconds.
Step 2: Select the Time Setting
Once in adjustment mode, use the “Adjust” and “Next” buttons to navigate to the time setting. The time setting is usually denoted by an icon of a clock or the word “Time.”
Step 3: Adjust the Hours
Use the “Adjust” and “Next” buttons to increase or decrease the hours. Holding down the buttons will make the numbers scroll faster.
Step 4: Adjust the Minutes
Once the hours have been set, use the “Adjust” and “Next” buttons to increase or decrease the minutes.
Step 5: Select the Seconds (Optional)
If your watch displays seconds, you can also adjust them using the “Adjust” and “Next” buttons.
Step 6: Adjust the Month (If Applicable)
Some Armitron digital watches also display the date. To adjust the month, use the “Adjust” and “Next” buttons to select the correct month.
Step 7: Adjust the Day of the Week (If Applicable)
If your watch displays the day of the week, use the “Adjust” and “Next” buttons to select the correct day.
Step 8: Saving the New Time and Exiting Adjustment Mode
| OS | Steps |
|---|---|
| iOS | Press the “Mode” button once to save the new time and exit adjustment mode. |
| Android | Hold the “Mode” button for about 3 seconds to save the new time and exit adjustment mode. |
**Adjusting Time**
1. Locate and press the “Mode” button until you reach the timekeeping mode.
2. Press and hold the “Set” button until the hour digits begin flashing.
3. Use the “Up” and “Down” buttons to adjust the hour forward or backward.
4. Press the “Mode” button again to move to the minute digits.
5. Use the “Up” and “Down” buttons to adjust the minutes forward or backward.
6. Press the “Mode” button once more to move to the second digits if you wish to adjust them.
7. Use the “Up” and “Down” buttons to adjust the seconds forward or backward.
8. Press the “Mode” button a final time to exit the timekeeping mode.
9. If the “PM” or “AM” indicator is not correct, press and hold the “Set” button until the indicator starts flashing. Then, use the “Up” and “Down” buttons to toggle between “AM” and “PM.”
**Troubleshooting Common Time Adjustment Issues**
**Time keeps resetting**
Loose battery: Replace the battery with a new one.
Reset the watch: Hold down the “Mode” and “Set” buttons simultaneously for 10 seconds.
**Buttons not responding**
Dirty contacts: Clean the contacts on the back of the watch or inside the band attachment area.
Faulty buttons: Contact Armitron for repair or replacement.
**Time is inaccurate**
Weak battery: Replace the battery with a new one.
Magnetism: If the watch has been exposed to a magnetic field, demagnetize it by waving a strong magnet near it.
**Cannot change time in 12-hour format**
Some Armitron watches are only capable of displaying time in 24-hour format.
How To Change Time On Armitron Digital Watch
1. Press and hold the “Mode” button until the time starts flashing.
2. Press the “Set” button to adjust the hours.
3. Press the “Mode” button to move to the minutes.
4. Press the “Set” button to adjust the minutes.
5. Press the “Mode” button to move to the seconds.
6. Press the “Set” button to adjust the seconds.
7. Press the “Mode” button to move to the AM/PM setting.
8. Press the “Set” button to toggle between AM and PM.
9. Press the “Mode” button to exit the time setting mode.
Additional Tips for Maintaining Accurate Timekeeping
10. Keep the watch away from strong magnetic fields, which can interfere with its accuracy.
– Avoid exposing the watch to extreme temperatures, as this can cause the components to expand or contract and affect timekeeping.
– Regularly clean the watch with a soft, dry cloth to remove dirt and debris that can build up and affect the watch’s performance.
– If the watch comes into contact with water, dry it thoroughly with a clean cloth as soon as possible to prevent damage.
– Store the watch in a dry place when not in use to prevent the battery from draining and to maintain its accuracy.
How To Change Time On Armitron Digital Watch
Armitron digital watches are known for their durability and affordability. They are also relatively easy to use, but changing the time can be a bit tricky if you don’t know the right steps.
Here are the steps on how to change time on Armitron digital watch:
- Press the “Mode” button until the time display starts flashing.
- Use the “Up” or “Down” buttons to adjust the hour.
- Press the “Mode” button again to move to the minutes.
- Use the “Up” or “Down” buttons to adjust the minutes.
- Press the “Mode” button one final time to save the changes.
That’s all there is to it! Changing the time on your Armitron digital watch is a quick and easy process.
People Also Ask About How To Change Time On Armitron Digital Watch
How do I change the date on my Armitron digital watch?
To change the date on your Armitron digital watch, press the “Mode” button until the date display starts flashing. Then, use the “Up” or “Down” buttons to adjust the date. Press the “Mode” button one final time to save the changes.
How do I set the alarm on my Armitron digital watch?
To set the alarm on your Armitron digital watch, press the “Mode” button until the alarm display starts flashing. Then, use the “Up” or “Down” buttons to adjust the alarm time. Press the “Mode” button one final time to save the changes.
How do I turn off the alarm on my Armitron digital watch?
To turn off the alarm on your Armitron digital watch, press the “Alarm” button. The alarm will sound for a few seconds and then turn off.
