Maintaining a clean and hygienic home is essential for both the well-being of your family and the longevity of your belongings. When it comes to carpets, especially those in homes with furry friends, regular cleaning is crucial to remove dirt, pet hair, and allergens. If you own a Bissell Pet Carpet Cleaner, understanding how to clean it properly is paramount to ensure its optimal performance and extend its lifespan. Follow these comprehensive instructions to keep your Bissell Pet Carpet Cleaner in pristine condition and your carpets looking their best.
Before embarking on the cleaning process, it is essential to gather the necessary supplies. These include a clean microfiber cloth, a mild dish soap solution, a vacuum cleaner, and a dry brush. Additionally, you may want to have a pair of rubber gloves on hand to protect your skin from any cleaning agents. Preparing your supplies in advance will streamline the cleaning process and prevent interruptions. Once you have everything you need, you can proceed with the actual cleaning steps.
Begin by unplugging the Bissell Pet Carpet Cleaner from the electrical outlet. This safety precaution prevents any accidental electric shocks during the cleaning process. Next, remove the dirty water tank and empty its contents into a sink or toilet. Rinse the tank thoroughly with clean water and replace it in its designated slot. Fill the clean water tank with fresh water, add the recommended amount of Bissell cleaning solution, and reattach it to the machine. With the preparation complete, you are ready to clean the exterior and interior components of your Bissell Pet Carpet Cleaner, ensuring its continued effectiveness in keeping your carpets pristine.
Preparing Your Bissell Pet Carpet Cleaner
Before you begin cleaning your carpets with your Bissell Pet Carpet Cleaner, it is important to prepare the machine by performing the following steps:
1. Empty the Dirty Water Tank
The first step is to empty the dirty water tank. This tank collects the dirty water and debris that is extracted from the carpet during cleaning. To empty the tank, simply remove it from the machine and pour the contents down the drain. Be sure to rinse the tank thoroughly before reinserting it into the machine.
2. Fill the Clean Water Tank
Next, fill the clean water tank with hot water. Do not use boiling water, as this can damage the machine. Fill the tank to the “max” line, but do not overfill it.
3. Add Cleaning Solution
Once the clean water tank is full, add the recommended amount of Bissell Pet Carpet Cleaner solution to the tank. The amount of solution to add will vary depending on the size of the carpet you are cleaning. Consult the user manual for specific instructions.
4. Attach the Cleaning Head
Attach the cleaning head to the machine by aligning the tabs on the head with the slots on the machine. Push the head down until it clicks into place.
5. Select the Cleaning Mode
Select the cleaning mode that is appropriate for the type of carpet you are cleaning. There are typically two modes to choose from: Regular for everyday cleaning and Deep Clean for heavily soiled carpets.
6. Pretreat Stains
If there are any stains on the carpet, pretreat them with the Bissell Pet Carpet Cleaner Spot & Stain Remover. Apply the remover to the stain and allow it to sit for a few minutes before cleaning with the machine.
7. Test the Machine
Before cleaning the entire carpet, test the machine in an inconspicuous area to make sure that it is working properly and that you are satisfied with the results. This will also allow you to adjust the cleaning settings if necessary.
Removing Clogs and Debris
The hose and filter of your Bissell Pet Carpet Cleaner can become clogged with hair, pet dander, and other debris. This can reduce the cleaner’s suction power and make it less effective. Here’s how to remove clogs and debris:
Hose
1. Turn off the carpet cleaner and unplug it from the outlet.
2. Remove the hose from the machine.
3. Use a wet/dry vacuum cleaner to suck out any debris from the hose.
4. If the clog is still not removed, you can use a snake to clear it.
5. Flush the hose with clean water.
6. Reattach the hose to the machine.
Filter
1. Remove the filter from the machine.
2. Rinse the filter under cold water.
3. Let the filter air dry completely.
4. Reinsert the filter into the machine.
Tips for preventing clogs
* Empty the dirty water tank frequently.
* Clean the filter after each use.
* Use a hose cleaning solution to help prevent clogs.
* Run a vinegar solution through the machine every few months to help dissolve mineral deposits.
Cleaning the Brush Roll and Belts
Regular maintenance of your Bissell Pet Carpet Cleaner’s brush roll and belts is crucial for optimal performance and longevity. Follow these steps to ensure a clean and efficient machine:
Cleaning the Brush Roll
1. Unplug the carpet cleaner and turn it upside down.
2. Locate the brush roll access door (typically on the bottom of the unit) and remove it.
3. Carefully remove the brush roll by gently pulling it out of the housing.
4. Use a soft brush or damp cloth to remove any hair, debris, or dirt from the bristles of the brush roll.
5. Inspect the brush roll for any damage or wear and tear. If it’s worn or damaged, it should be replaced.
6. Rinse the brush roll thoroughly with clean water and allow it to air dry.
Cleaning the Belts
1. With the brush roll removed, locate the drive belts. They are typically located on the sides of the housing.
2. Use a clean, dry cloth to wipe away any dust or debris from the belts.
3. Check the belts for any signs of wear or damage, such as fraying, cracking, or stretching. If a belt is damaged, it should be replaced.
| Warning: |
Never use bleach or harsh chemicals to clean the belts, as it can damage the rubber material.
Emptying and Replacing the Dirty Water Tank
To empty the dirty water tank:
- Turn off the Bissell pet carpet cleaner and unplug it from the electrical outlet.
- Remove the dirty water tank by lifting it straight up and away from the machine.
- Empty the dirty water into a sink or toilet.
- Rinse the dirty water tank with clean water.
- Replace the dirty water tank back onto the machine.
Resetting the Thermal Protector:
If the thermal protector trips, the Bissell pet carpet cleaner will automatically shut off. To reset the thermal protector:
- Unplug the Bissell pet carpet cleaner from the electrical outlet and allow it to cool down for at least 30 minutes.
- Once the machine has cooled down, plug it back into the electrical outlet and turn it on.
- Press the reset button on the back of the machine.
- The thermal protector will reset, and the Bissell pet carpet cleaner will start working again.
After cleaning the dirty water tank, it is important to replace it properly to ensure that the carpet cleaner works correctly. To replace the dirty water tank:
- Make sure that the dirty water tank is empty and clean.
- Lift the dirty water tank up and over the machine base.
- Align the dirty water tank with the tracks on the machine base.
- Lower the dirty water tank into place.
- Make sure that the dirty water tank is securely in place.
| Troubleshooting |
Solution |
| The dirty water tank is leaking |
Inspect the tank for cracks or damage.
Ensure the tank is properly seated on the base. |
| The dirty water tank is not emptying |
Check for clogs in the tank or hose.
Ensure the tank is properly seated on the base. |
| The dirty water tank is overflowing |
Empty the tank more frequently.
Check for clogs in the tank or hose |
Filling and Using the Clean Water Tank
To fill the clean water tank, follow these steps:
- Unplug the carpet cleaner from the outlet and remove the clean water tank.
- Rinse out the tank with clean water and insert it back into the cleaner.
- Fill the tank with hot tap water up to the “MAX” line.
- Add the recommended amount of Bissell cleaning solution to the tank.
- Replace the lid on the tank and plug in the carpet cleaner.
To use the clean water tank, follow these steps:
- Turn on the carpet cleaner and select the desired cleaning mode.
- Pull the trigger on the handle to release the cleaning solution onto the carpet.
- Push the cleaner forward and backward over the carpet, applying even pressure.
- Rinse the carpet with clean water by pulling the trigger on the handle and releasing only water onto the carpet.
- Push the cleaner forward and backward over the carpet again to remove the rinse water.
Here are some additional tips for using the clean water tank:
| Tip |
Benefit |
| Use hot water to fill the tank. |
Hot water helps to dissolve dirt and stains more effectively. |
| Do not overfill the tank. |
Overfilling the tank can cause the cleaner to leak. |
| Add the recommended amount of cleaning solution. |
Too much cleaning solution can cause the cleaner to foam excessively. |
| Rinse the carpet with clean water after cleaning. |
Rinsing the carpet helps to remove any residual cleaning solution and dirt. |
Cleaning the Suction and Hose
Maintaining the suction and hose of your Bissell Pet Carpet Cleaner is crucial for optimal performance. Follow these detailed steps to ensure a thorough and effective cleaning:
1. Drain the Dirty Water Tank
Empty the dirty water tank after each use to prevent bacteria buildup and odors. To do so, remove the tank and pour out the contents into a toilet or sink.
2. Rinse Out the Hose
Disconnect the hose from the cleaner and use a garden hose or faucet to rinse out any debris or cleaning solution. Start at one end and work your way through.
3. Clean the Suction Inlet
Inspect the suction inlet at the bottom of the cleaner for any blockages. Use tweezers or a pipe cleaner to remove any hair or debris that could restrict airflow.
4. Clean the Hose Connection Joint
Examine the joint where the hose connects to the cleaner. Use a soft cloth to wipe away any dirt or solution buildup. Ensure a secure connection when reattaching the hose.
5. Inspect the Belt
The belt that drives the suction motor may need occasional replacement. Check the belt for wear and tear, and replace it if necessary according to the manufacturer’s instructions.
6. Perform a Maintenance Flush
Run a solution of 1 cup of white vinegar mixed with 1 gallon of warm water through the cleaner without using the brushes. This will dissolve any mineral deposits or cleaning solution residue. Rinse the cleaner with clean water afterward.
| Step |
Instructions |
| 1 |
Drain the dirty water tank. |
| 2 |
Rinse out the hose. |
| 3 |
Clean the suction inlet. |
| 4 |
Clean the hose connection joint. |
| 5 |
Inspect the belt. |
| 6 |
Perform a maintenance flush. |
1. Gather Supplies
You’ll need:
– 2 clean microfiber cloths
– White vinegar
– Hot water
2. Remove the Dirty Water Tank
Unplug the cleaner and remove the dirty water tank. Pour out the dirty water and rinse the tank with clean water.
3. Clean the Dirty Water Strainer
Remove the dirty water strainer from the tank. Rinse it with clean water and replace it in the tank.
4. Clean the Nozzle
Remove the nozzle from the cleaner. Rinse it with clean water and remove any debris. Replace the nozzle.
5. Fill the Clean Water Tank
Fill the clean water tank with hot water. Add the recommended amount of Bissell Pet carpet cleaning solution.
6. Attach the Clean Water Tank
Attach the clean water tank to the cleaner.
7. Clean the Cleaner
Turn on the cleaner and select the desired cleaning mode. Spray the cleaning solution onto the carpet and use the brush to agitate the carpet. Vacuum up the dirty water.
8. Rinse the Carpet
After cleaning the carpet, rinse it with clean water. Select the “Rinse” setting on the cleaner and spray the clean water onto the carpet. Vacuum up the dirty water.
9. Clean the Interior of the Cleaner
Remove the Brushroll: Unplug the cleaner and turn it upside down. Remove the brushroll by unscrewing the screws that hold it in place.
Clean the Brushroll: Remove any hair or debris from the brushroll. Rinse it with clean water and replace it.
Clean the Interior: Wipe down the inside of the cleaner with a damp cloth. Mix equal parts white vinegar and hot water in a bowl, dip a cloth in the solution and wipe down the interior of the cleaner to disinfect it.
Dry the Cleaner: Leave the cleaner upside down to dry for several hours.
10. Maintain Your Bissell Pet Carpet Cleaner
Regular upkeep will promote longevity and effectiveness for your carpet cleaner. Refer to below table for optimal maintainenance practices:
| Maintenance Task |
Recommended Schedule |
| Empty and clean rinse tank |
After each use |
| Inspect and clean brushroll |
Every 3-6 months |
| Check and replace filters |
Every 6-12 months |
Follow these regular maintenance steps to keep your Bissell Pet Carpet Cleaner operating at its peak performance:
- Emptying and Cleaning the Rinse Tank: After each cleaning session, empty the rinse tank and thoroughly rinse it with clean water.
- Inspecting and Cleaning the Brushroll: Examine the brushroll for any tangled hair or debris. Use scissors to carefully remove any obstructions and then clean the brushroll with a damp cloth.
- Checking and Replacing Filters: Every 6-12 months, inspect the foam and pre-motor filters for signs of wear or dirt accumulation. Replace them when necessary to ensure optimal suction and filtration.
How to Clean a Bissell Pet Carpet Cleaner
Cleaning your Bissell Pet Carpet Cleaner is an important part of maintaining your home and keeping your carpet looking its best. Here are the steps on how to clean your Bissell Pet Carpet Cleaner:
- Empty the Clean Water Tank. Unplug the carpet cleaner and remove the clean water tank. Empty the tank and rinse it with clean water.
- Clean the Dirty Water Tank. Remove the dirty water tank and empty it. Rinse the tank with clean water and then fill it with fresh water.
- Clean the Pet Hair Strainer. Remove the pet hair strainer from the bottom of the carpet cleaner. Rinse the strainer with clean water and then replace it.
- Clean the Brushroll. Remove the brushroll from the carpet cleaner. Rinse the brushroll with clean water and then replace it.
- Clean the Outside of the Carpet Cleaner. Wipe down the outside of the carpet cleaner with a damp cloth.
- Reassemble the Carpet Cleaner. Reassemble the carpet cleaner and plug it in.
People Also Ask
How often should I clean my Bissell Pet Carpet Cleaner?
You should clean your Bissell Pet Carpet Cleaner after every use.
What type of cleaner should I use in my Bissell Pet Carpet Cleaner?
You should use a carpet cleaner that is specifically designed for use in a Bissell Pet Carpet Cleaner.
How do I troubleshoot my Bissell Pet Carpet Cleaner?
If you are having problems with your Bissell Pet Carpet Cleaner, you can consult the user manual or contact Bissell customer service.
|
