5 Steps to Effortlessly Close a Tommy Bahama Chair

Folding away your Tommy Bahama chair should be as relaxing as sitting in it. However, if you are struggling to close your Tommy Bahama chair, do not worry you are not alone. Thankfully, with a few simple steps, you’ll be able to close your chair and store it away with ease. Follow these step-by-step instructions and helpful tips to make the process a breeze.

The first step to close your Tommy Bahama chair is to ensure that the back of the chair is facing you. Next, pull up on the armrests until they click into place. Once the armrests are locked in place, grip the seat of the chair with both hands and pull it toward you until it is close to your body. Then, lift the seat up and over the back of the chair until it is completely folded.

Finally, secure the chair by tucking the flaps on the sides of the seat under the armrests. Your Tommy Bahama chair should now be closed and ready for storage or transport. Whether you are packing up for a day at the beach or storing your chair for the winter, folding it away should be a quick and easy task. By following these simple steps, you can ensure that your chair is properly closed and ready for your next use.

Dismantling the Seat and Backrest

To begin dismantling the Tommy Bahama chair, you should first remove the seat cushion by unzipping the fabric cover. After removing the seat cushion, you will need to identify the screws and/or bolts that hold the seat frame to the backrest frame. Carefully remove all of the hardware that you find. Once you have removed all of the hardware, you can gently lift the seat frame away from the backrest frame.

To separate the backrest frame into its individual pieces, you’ll need to locate the screws and/or bolts that hold the backrest slats in place. Once you have identified the hardware, carefully remove it and set aside the backrest slats. Next, you should remove any additional hardware that is holding the backrest frame together. Once you have removed this hardware, you can carefully separate the backrest frame into its individual pieces.

Step	Action
1	Remove the seat cushion by unzipping the fabric cover.
2	Identify and remove the screws and/or bolts that hold the seat frame to the backrest frame.
3	Gently lift the seat frame away from the backrest frame.
4	Locate the screws and/or bolts that hold the backrest slats in place and remove them.
5	Remove any additional hardware that is holding the backrest frame together.
6	Carefully separate the backrest frame into its individual pieces.

Detaching the Armrests

Begin by checking if your Tommy Bahama’s armrests have quick-release levers, typically located on the underside of the arms. If so, simply pull the levers to release the arms. If not, you will need to unscrew the bolts that secure the arms to the chair. Using a wrench or socket, carefully unbolt the arms, being mindful not to overtighten or loosen the bolts.

Disassembling the Armrests

once the armrests are detached from the chair, you can disassemble them for further storage or transport. To do this, locate the screws or bolts that secure the two parts of the armrest together. They are typically located on the inner side of the armrest. Unscrew the connectors and separate the two armrest components.

Component	Location
Bolts	Underside of arms
Screws	Inner side of armrests

Disassembling the Fabric

Step 1: Remove the Velcro Straps

Locate the Velcro straps on the underside of the chair. Carefully pull them apart to release the fabric from the frame.

Step 2: Unzip the Fabric

Find the zipper located at the back or bottom of the chair. Unzip it to separate the fabric from the frame.

Step 3: Separate the Fabric Halves

Once the zipper is unzipped, gently pull the two fabric halves apart. They should come away easily.

Step 4: Remove the Fabric Sleeves

Locate the fabric sleeves that enclose the chair’s poles. The sleeves may have Velcro straps or buttons. Carefully remove them to fully disassemble the fabric:

Sleeve Type	Removal Method
Velcro Straps	Gently pull the Velcro straps apart.
Buttons	Press down on the buttons and simultaneously pull the sleeve away.
Zipper	Unzip the zipper to release the sleeve.

Removing the Cushion Stuffing

1. Unzip the bottom of the cushion cover and remove the stuffing.

2. Check if the stuffing is wet or damaged. If it is, you will need to replace it.

3. If the stuffing is still in good condition, you can simply stuff it back into the cushion cover.

4. Zip up the cushion cover and place the cushion back on the chair.

Cleaning and Inspecting the Frame

Regular cleaning and inspection are essential to maintaining the longevity and functionality of your Tommy Bahama chair. Here’s a detailed guide to help you do it effectively:

Step 1: Choose the Right Cleaning Solution

Use a mild soap solution or a commercial cleaner specifically designed for outdoor furniture. Avoid using harsh chemicals or abrasive cleaners, as they can damage the frame.

Step 2: Apply the Cleaning Solution

Use a soft cloth or sponge to apply the cleaning solution to the frame. Work in small sections, gently scrubbing away any dirt or debris.

Step 3: Rinse Thoroughly

Once the dirt and grime have been removed, rinse the frame thoroughly with clean water. Use a garden hose or a bucket of water to remove all traces of the cleaning solution.

Step 4: Allow to Air Dry

After rinsing, allow the frame to air dry completely. Do not use a towel or cloth to dry it, as this can trap moisture and lead to mold or mildew.

Step 5: Inspect for Damage

While the frame is drying, inspect it closely for any signs of damage. Check for cracks, loose joints, or any other issues that need to be addressed.

Step 6: Repair Any Damage

If you find any damage, follow these steps to repair it:

For minor cracks or loose joints, use a marine-grade epoxy or sealant to repair them.
For larger cracks or broken parts, you may need to contact Tommy Bahama customer service or a professional repair shop for assistance.
Once the repairs are complete, allow the frame to cure or dry according to the manufacturer’s instructions.

Recovering the Fabric

1. Remove the Old Fabric

Begin by using a seam ripper to carefully remove the existing fabric from the chair. Take care not to damage the frame of the chair.

2. Prepare the New Fabric

Measure the chair frame to determine how much fabric you will need. Cut the new fabric to the correct size, allowing for a 2-inch overlap on all sides.

3. Stretch the Fabric Over the Frame

Lay the new fabric over the frame and stretch it tightly. Use a staple gun to secure the fabric to the frame, spacing the staples about 1 inch apart.

4. Trim the Excess Fabric

Once the fabric is stapled, trim away any excess fabric around the edges of the chair.

5. Iron the Fabric

Use an iron to gently press the fabric into place and remove any wrinkles.

6. Apply Trim (Optional)

If desired, you can add decorative trim to the edges of the fabric. Secure the trim with fabric glue or a staple gun.

7. Create a Comfortable Cushion

Cut a piece of foam or batting to the size of the chair seat. Cover the foam with fabric and staple it in place. Place the cushion on the chair seat for added comfort.

Attaching the Armrests

Now that the seat and back are attached to the base, it’s time to attach the armrests. Start by identifying the left and right armrests. They will be labeled accordingly. Next, locate the four bolts that will be used to attach the armrests to the frame. These bolts will typically be 5/16″ x 1-1/2″ in size. Once you have identified the bolts, insert them into the holes in the armrests and tighten them until they are snug.

Once the armrests are attached to the frame, you can now attach the armrest covers. Start by slipping the armrest cover over the armrest. Make sure that the cover is properly aligned and that the Velcro straps are facing the inside of the armrest. Next, secure the Velcro straps around the armrest and tighten them until they are snug.


Left armrest	Attach the armrest cover by slipping it over the armrest and securing the Velcro straps around the armrest.
Right armrest	Attach the armrest cover by slipping it over the armrest and securing the Velcro straps around the armrest.

Your Tommy Bahama chair is now complete. Enjoy!

How To Close A Tommy Bahama Chair

Tommy Bahama chairs are a popular choice for outdoor furniture because they are comfortable, stylish, and durable. However, they can be a bit tricky to close, especially if you’re not used to it. Here are the steps on how to close a Tommy Bahama chair:

Locate the release lever. The release lever is located on the side of the chair, near the back. It is usually a small, metal lever.
Pull the release lever. This will release the lock that is holding the chair open.
Fold the chair in half. Once the lock is released, you can fold the chair in half by bringing the two sides together.
Secure the chair. Once the chair is folded, you need to secure it so that it doesn’t come open again. There is usually a strap or buckle that you can use to do this.