Quarters are a compact and dynamic group of residential districts near downtown Edmonton, Alberta, Canada. Composed of six distinct neighborhoods (Oliver, Queen Alexandra, Strathcona, Ritchie, McCauley, and Boyle Street), Quarters presents a compelling mix of historic charm, cultural vibrancy, and urban renewal. Whether you’re a seasoned urban explorer or a prospective resident, prepare to be captivated by the unique character and timeless appeal of Quarters.
Nestled along the North Saskatchewan River Valley, Quarters has a rich history dating back to Edmonton’s early origins. Historic buildings blend seamlessly with modern structures, creating a captivating architectural tapestry. The area is revered for its Victorian and Edwardian homes, many of which have been meticulously restored and serve as charming reminders of a bygone era. Stroll along the tree-lined streets, admire the intricate details of these architectural gems, and immerse yourself in the neighborhood’s palpable sense of history.
Quarters is a cultural melting pot where diverse communities converge and contribute to the neighborhood’s vibrant tapestry. The area is brimming with independent shops, cozy cafes, and eclectic restaurants, each reflecting the distinct character of its enclave. From vintage boutiques and art galleries to organic grocers and international eateries, Quarters caters to a wide range of tastes and interests. Moreover, the neighborhood is home to several cultural institutions, including the renowned Royal Alberta Museum and the Art Gallery of Alberta, making it a hub for arts, culture, and education.
Measure the Inside Corner Angle
When it comes to cutting inside corners on quarter round, measuring the angle is crucial. By accurately determining the angle, you can ensure that your cuts fit perfectly and provide a seamless transition between the quarter round and the adjacent walls. Here are some detailed steps on how to measure the inside corner angle:
Tools You’ll Need:
- Inside angle protractor
- Pencil
- Ruler
Steps:
-
Identify the Inside Corner: Locate the point where the two walls meet at the inside corner.
-
Position the Angle Protractor: Place the edge of the angle protractor along one wall, aligning the "0" mark with the corner.
-
Measure the Angle: Open the protractor’s arms and extend them along the other wall. The angle reading will be displayed in degrees.
-
Mark the Reference Line: On the wall where the protractor is aligned, draw a reference line parallel to the protractor’s edge. This line will be used for cutting the quarter round.
| Example |
|---|
| Suppose you measure an inside corner angle of 85 degrees. This means that the two walls meet at an angle of 85 degrees. |
- Transfer the Measurement: Using a ruler, transfer the angle measurement to the quarter round. Mark the point where the angle will be cut.
By following these steps, you can accurately measure the inside corner angle and ensure a precise fit for your quarter round installation.
Transfer the Angle to the Quarter Round
Now that the correct angle has been calculated, it’s time to transfer it to the quarter round. To do this, follow these steps:
1. Mark the Length on the Quarter Round
Measure and mark the length of the inside corner along the edge of the quarter round.
2. Set Up a Compass
Set the compass to the measurement that was previously obtained for the inside angle. One leg of the compass should be placed at the mark made in step 1, while the other leg should extend past the edge of the quarter round.
3. Draw an Arc
Hold the compass steady and draw an arc that intersects the edge of the quarter round.
4. Connect the Points
Use a ruler to connect the point where the arc intersects the edge of the quarter round to the mark made in step 1. This line represents the inside angle that needs to be cut.
5. Verify the Angle
Double-check that the angle is correct by placing the miter joint tool against the quarter round. The tool should fit snugly against the line that was drawn.
Mark the Inside Edge
Now that you have your measurements, transfer them to the quarter round. Using a tape measure and pencil, mark the desired length of the inside edge. This is the length of the straight portion of the quarter round that will be mitered to create the inside corner.
Next, determine the angle of the inside corner. You can do this using a protractor or by measuring the angle with a measuring tape. Once you know the angle, mark it on the inside edge of the quarter round.
To ensure accuracy, repeat these steps for both pieces of quarter round that will form the inside corner. Make sure the markings on both pieces are aligned before cutting.
Tips for Marking the Inside Edge:
| Tip | Description |
|---|---|
| Use a sharp pencil | This will help you make precise markings that are easy to see. |
| Measure carefully | Ensure that the measurements for both pieces of quarter round are accurate to avoid mistakes. |
| Check your angles | Verify the angles of the inside corner before cutting to ensure a proper fit. |
Cut the Inside Edge
4. Trim the inside edge of the trim piece. Use a sharp utility knife to score the inside edge of the trim piece, following the pencil line. Be careful not to cut through the entire piece of trim. The depth of the cut should be about 1/3 of the thickness of the trim.
In some cases, it may be easier to use a coping saw or a jigsaw to cut the inside edge. If you are using a coping saw, insert the blade into the slot on the side of the trim piece and follow the pencil line. If you are using a jigsaw, attach a fine-tooth blade and follow the pencil line, keeping the blade perpendicular to the trim piece.
Once you have cut the inside edge of the trim piece, test fit it into the inside corner. The trim piece should fit snugly into the corner. If the trim piece is too long, trim off the excess with a utility knife or a miter saw. If the trim piece is too short, you will need to replace it with a longer piece.
Check the Fit
Once you have made your cuts, it’s important to check the fit of the quarter round before you glue it in place. Place the cut piece into the corner to ensure that it fits snugly and there are no gaps. If the fit is not quite right, you may need to make some minor adjustments to the cut. Once you are satisfied with the fit, you can move on and glue the quarter round in place.
Here are some additional tips to cutting inside corners on quarter round:
| Tip | Description |
|---|---|
| Use a sharp saw | A sharp saw will produce clean, precise cuts. |
| Cut slowly | Cutting slowly will help you to avoid mistakes. |
| Use a miter box | A miter box will help you to cut accurate 45-degree angles. |
| Test the fit | Before gluing the quarter round in place, test the fit to make sure that it is correct. |
Adjust the Cut as Needed
Once you have made the initial cuts, inspect them closely to ensure they fit together properly. If necessary, adjust the cuts slightly with a sharp knife. Be careful not to cut too much, as you can always remove more material, but it is difficult to add it back.
To fine-tune the fit, you can use a sanding block or sandpaper to gently smooth the edges of the cuts. This will help them to fit together more seamlessly and create a professional-looking finish.
Here’s a table summarizing the steps for adjusting the cut:
| Step | Action |
|---|---|
| 1 | Inspect the cuts to ensure proper fit. |
| 2 | Adjust the cuts slightly with a sharp knife if necessary. |
| 3 | Sand the edges of the cuts to smooth them. |
Sand and Finish the Edge
Once the inside corner is cut, it’s typically best to smooth and refine the edge for a blemish-free finish. Follow these steps for a professional-looking outcome:
- **Use a sanding block or a palm sander with fine-grit sandpaper (120-grit or higher).** Gently sand along the cut edge at a slight angle to remove any splinters or rough spots.
- **Continue sanding until the edge is smooth to the touch.** Avoid over-sanding, as this can create a rounded edge instead of a crisp corner.
- **Wipe down the sanded area with a damp cloth to remove any dust or debris.** Allow the edge to dry completely before applying any finish.
- **If desired, apply a thin coat of wood filler to fill any gaps or imperfections in the cut.** Allow the wood filler to dry and sand it smooth before applying the finish.
- **Apply a coat of wood stain or paint to the quarter round to match the surrounding surface.** Allow the finish to dry completely before handling or using the quarter round.
- **Once the finish is dry, you can use a wax or polyurethane to protect and enhance the look of the edge.** This will help prevent any wear or damage to the cut edge over time.
- **Polish the edge with a soft cloth for a gleaming finish.** This will remove any excess wax or polyurethane and leave the edge looking its best.
Tips for Sanding Inside Corners:
- Use a sanding sponge or a small sanding block to get into the tight corners.
- Sand in both directions to ensure even sanding.
- Avoid applying too much pressure when sanding, as this can damage the wood.
- Protect your hands with gloves while sanding.
Apply Quarter Round to the Corner
Once you have coped the first piece of quarter round, you can apply it to the corner.
1. Apply a thin bead of wood glue to the back of the quarter round, along the edge that will be against the wall.
2. Align the quarter round with the corner, and press it firmly into place.
3. Use a nail gun or a hammer and nails to secure the quarter round.
4. Countersink the nails slightly below the surface of the quarter round.
5. Fill the nail holes with wood filler.
6. Sand the nail holes smooth.
7. Paint or stain the quarter round to match the wall and baseboard.
8. If you are applying quarter round to a door casing, you will need to cut the quarter round at a 45-degree angle to fit around the door casing. To do this, you can use a miter saw or a coping saw.
To use a miter saw:
– Set the saw to a 45-degree angle.
– Place the quarter round on the saw table, with the edge that will be against the door casing facing up.
– Hold the quarter round firmly in place and lower the saw blade onto the quarter round.
– Cut the quarter round at a 45-degree angle.
– Repeat the process to cut the other end of the quarter round at a 45-degree angle.
To use a coping saw:
– Mark the quarter round at a 45-degree angle.
– Hold the quarter round in place and insert the coping saw blade into the mark.
– Cut the quarter round at a 45-degree angle.
– Repeat the process to cut the other end of the quarter round at a 45-degree angle.
Secure the Quarter Round
9. **Fine-tune the fit (optional)**: Once the quarter round is in place, you can make slight adjustments to ensure a perfect fit. Use a utility knife or a sanding block to shave off small amounts of material from the inside edge of the quarter round where it meets the adjacent piece. Alternatively, you can apply wood filler to gaps and sand it down once it dries. Here’s a table summarizing the fine-tuning options:
| Option | Advantages | Disadvantages |
|---|---|---|
| Shaving with a Utility Knife | Precise and controlled; minimal material loss | Requires careful handwork; risk of cutting too much |
| Sanding with a Sanding Block | Smooths out edges; less risk of cutting too much | May remove too much material if not done carefully |
| Applying Wood Filler | Fills in gaps and creates a seamless finish | May require multiple applications and sanding; can be more time-consuming |
Finishing Touches
Once you’ve installed the quarter round, it’s time to add the finishing touches.
1. Fill the Nail Holes
Use a putty knife to fill the nail holes with wood filler. Allow the filler to dry completely and then sand it smooth.
2. Caulk the Seams
Caulk the seams between the quarter round and the baseboard and the floor. This will help to seal any gaps and prevent moisture from getting in.
3. Paint the Quarter Round
Paint the quarter round to match the baseboard and the floor. You can use a brush or a roller to apply the paint.
4. Attach the Shoe Molding
If you’re installing shoe molding, attach it to the bottom of the quarter round. Shoe molding is a thin piece of molding that helps to hide the gap between the floor and the baseboard.
5. Install the Corner Blocks
Corner blocks are used to cover the inside corners of the quarter round. Miter the corners of the corner blocks and then attach them to the quarter round with glue or nails.
6. Sand and Finish the Corner Blocks
Sand the corner blocks smooth and then finish them with paint or stain to match the quarter round.
7. Enjoy Your New Quarter Round!
Now that you’ve installed the quarter round and added the finishing touches, you can enjoy your new, professional-looking floor!
8. Caulk the Outside Corners
If you’re not installing corner blocks, you can caulk the outside corners of the quarter round instead. This will help to seal any gaps and prevent moisture from getting in.
9. Use a Mitre Box
If you’re not sure how to miter the corners of the corner blocks, you can use a mitre box. A mitre box is a tool that helps you to cut angles accurately.
10. Practice Makes Perfect
If you’re new to woodworking, it’s important to practice cutting and installing quarter round before you start on your actual project. This will help you to avoid mistakes and ensure that your finished project looks its best.
How To Cut Inside Corners On Quarter Round
To cut inside corners on quarter round, you will need a miter saw, a measuring tape, and a pencil. First, measure the length of the inside corner and mark it on the quarter round. Next, set the miter saw to a 45-degree angle and align the quarter round with the saw blade. Carefully hold the quarter round in place and cut it at the marked length. Repeat this process for the other side of the inside corner. Finally, dry fit the two pieces together to ensure that they fit properly. If necessary, make small adjustments to the cuts until the pieces fit together snugly.
People Also Ask About How To Cut Inside Corners On Quarter Round
How do you cut inside corners on quarter round for bay windows?
To cut inside corners on quarter round for bay windows, you will need to use a coping saw. First, measure the length of the inside corner and mark it on the quarter round. Next, align the quarter round with the saw blade and carefully cut it at the marked length. Finally, use a coping saw to cut the inside corner. Be sure to cut slowly and carefully to avoid splintering the wood.
How do you cut inside corners on quarter round for crown molding?
To cut inside corners on quarter round for crown molding, you will need a miter saw and a miter box. First, measure the length of the inside corner and mark it on the quarter round. Next, set the miter saw to a 45-degree angle and align the quarter round with the saw blade. Carefully hold the quarter round in place and cut it at the marked length. Repeat this process for the other side of the inside corner. Finally, dry fit the two pieces together to ensure that they fit properly. If necessary, make small adjustments to the cuts until the pieces fit together snugly.
How do you cut inside corners on quarter round for baseboards?
To cut inside corners on quarter round for baseboards, you will need a miter saw and a miter box. First, measure the length of the inside corner and mark it on the quarter round. Next, set the miter saw to a 45-degree angle and align the quarter round with the saw blade. Carefully hold the quarter round in place and cut it at the marked length. Repeat this process for the other side of the inside corner. Finally, dry fit the two pieces together to ensure that they fit properly. If necessary, make small adjustments to the cuts until the pieces fit together snugly.
