A stacked angled bob is a versatile haircut that can be styled in a variety of ways. It is a great choice for women who want a low-maintenance haircut that is still stylish.
To direct hair for a stacked angled bob, start by parting the hair in the middle. Then, section off the top of the head and clip it out of the way. Next, divide the remaining hair into two sections, one on each side of the head. Take the left section and direct it towards the right, using a round brush. Repeat this process on the right side, directing the hair towards the left. Finally, blow dry the hair until it is dry and smooth.
Once the hair is dry, you can style it as desired. You can leave it straight, curl it, or add waves. A stacked angled bob is a versatile haircut that can be styled in a variety of ways, so you can find a style that suits your personality and your lifestyle.
Choose the Right Tools
To achieve a perfect stacked angled bob, it’s essential to have the right tools at your disposal. Here’s what you’ll need:
Combs: Choose a combination of fine-tooth and wide-tooth combs. The fine-tooth comb will help to create precise sections, while the wide-tooth comb will detangle and smooth hair.
Scissors: Invest in high-quality, sharp cutting shears. Precision is key when creating an angled bob, so make sure your scissors are up to the task.
Sectioning clips: These will help you keep hair organized and out of the way as you work.
Blow dryer and round brush: A round brush and blow dryer will be necessary for styling the bob once it’s cut.
Optional:
RAZOR: A razor can be used to create a softer, piecey edge on the bob.
| Tool | Description |
|---|---|
| Fine-tooth comb | Create precise sections |
| Wide-tooth comb | Detangle and smooth hair |
| Cutting shears | Precision for angled bob |
| Sectioning clips | Organize and keep hair out of the way |
| Round brush | Style the bob |
| Blow dryer | Style the bob |
| Razor (optional) | Softer, piecey edge |
Section and Part the Hair
Sectioning and parting the hair is crucial for achieving a precise stacked angled bob. Follow these steps:
- Part the hair in the center: Using a comb, create a clean part down the center of the head, from the hairline to the nape.
- Section the hair horizontally: Divide the hair into three horizontal sections. Section the first section from the hairline to about mid-ear level and secure it with a clip. Section the middle section from mid-ear level to about 1-2 inches below the occipital bone and secure it with a second clip. Leave the bottom section loose.
- Subdivide the front section: Take the front section and divide it into two vertical subsections, one on each side of the part. Secure each subsection with a clip.
| Section | Parting |
|---|---|
| Top | Mid-ear to 1-2 inches below occipital bone |
| Middle | Hairline to mid-ear |
| Bottom | Loose |
| Front (subdivided) | Vertical parting on each side of center part |
Elevate and Angle the Hair
The key to achieving a successful stacked angled bob is to properly elevate and angle the hair. This technique creates the desired shape and movement in the haircut. Here’s a detailed, step-by-step guide:
Step 1: Section the Hair
Begin by sectioning the hair into four main quadrants: front, back, left, and right. Secure each quadrant with a hair clip.
Step 2: Elevate the Hair at the Nape
At the nape of the neck, elevate a small section of hair using a brush or comb. Hold the hair straight up at a 90-degree angle to the scalp. This will create the foundation for the stacked effect.
Step 3: Angle the Sides and Back
Starting from the nape, gradually angle the hair on the sides and back. Elevate each section slightly and angle it away from the head, creating a diagonal cut. The angle should be more pronounced at the top and gradually less severe as you move down towards the ends.
| Elevation Angle | Angle of Diagonal Cut |
|---|---|
| 90 degrees at the nape | 45 degrees |
| 45 degrees at the temples | 30 degrees |
| 30 degrees at the crown | 15 degrees |
Direct with a Round Brush
Step 1: Section the Hair
Divide the hair into three sections: top, left side, and right side. Clip the top section up out of the way.
Step 2: Brush the Sides
Take a round brush and place it at the roots of the hair on one side. Roll the brush up and down, directing the hair forward and towards the face. Repeat on the other side.
Step 3: Blow Dry the Top
Unclip the top section of hair. Using the round brush, blow dry the hair up and back, creating volume at the crown. Use the nozzle attachment to direct the airflow.
Step 4: Style the Ends
To create a stacked angled bob, style the ends of the hair with a slight angle. Take the round brush and place it at the mid-shaft of the hair. Roll the brush up and down, directing the ends towards the face. Use the nozzle attachment to concentrate the airflow on the ends.
Here is a table summarizing the steps for directing hair with a round brush:
| Step | Action |
|---|---|
| 1 | Section the hair into three sections. |
| 2 | Brush the sides of the hair forward. |
| 3 | Blow dry the top of the hair up and back. |
| 4 | Style the ends of the hair with a slight angle. |
Use Tension to Create Volume
Use tension to create volume by directing the hair away from the head when blow-drying.
This will help to lift the roots and give your hair more body.
To do this, start by blow-drying your hair upside down.
Once your hair is about 80% dry, flip it back and continue blow-drying, directing the airflow from the roots to the ends.
Here are some additional tips for using tension to create volume:
- Use a round brush. A round brush will help to create tension and lift the roots. Hold the brush at the roots and wrap the hair around the brush, then blow-dry the hair while pulling the brush away from the head.
- Use a volumizing spray. A volumizing spray will help to give your hair more body and lift.
Apply the spray to the roots of your hair before blow-drying. - Tease your hair. Teasing your hair is a quick and easy way to add volume.
To tease your hair, backcomb the hair at the roots, then smooth the hair over the top. - Use a root lifter. A root lifter is a product that is designed to give your hair more volume at the roots.
Apply the root lifter to the roots of your hair and then blow-dry your hair as usual. - Use a blow-dryer with a diffuser. A diffuser is an attachment that fits on the end of a blow-dryer and helps to disperse the airflow.
This can help to create volume and prevent frizz.
Flip and Smooth the Ends
The final step in perfecting a stacked angled bob is to flip and smooth the ends. This will create a sleek, polished look that will highlight the shape of the haircut.
To flip and smooth the ends, begin by applying a heat protectant to your hair. This will help to prevent damage from the heat of the styling tools.
Next, use a round brush to blow dry your hair straight. As you blow dry, use your hands to gently flip the ends under. This will create a slight curl that will add movement and volume to the hair.
Once your hair is dry, use a flat iron to smooth out the ends of the hair. Use the flat iron on a low setting to avoid damaging the hair.
To finish, apply a small amount of hair oil or serum to the ends of the hair. This will help to add shine and prevent frizz.
Tips for Flipping and Smoothing the Ends
- Use a round brush with a large barrel for best results.
- Start blow drying at the roots and work your way down to the ends.
- Flipping the ends under as you blow dry will create a more dramatic curl.
- Use a flat iron on a low setting to avoid damaging the hair.
- Apply a small amount of hair oil or serum to the ends of the hair to add shine and prevent frizz.
Control Flyaways with Hairspray
To keep your stacked angled bob looking sleek and polished, it’s important to control flyaways. Here are some tips for using hairspray to keep your hair in place:
Select a suitable hairspray
Choose a hairspray that is specifically designed for your hair type and needs. If you have fine hair, a light hold hairspray will be sufficient. If you have thick or coarse hair, you may need a stronger hold hairspray.
Apply hairspray to a brush or comb
Instead of spraying hairspray directly onto your hair, apply it to a brush or comb first. This will help to distribute the product evenly and prevent you from applying too much hairspray.
Brush or comb your hair
Once you have applied hairspray to your brush or comb, brush or comb your hair as usual. This will help to smooth out your hair and keep it in place.
Focus on the ends of your hair
When applying hairspray, focus on the ends of your hair. This is where flyaways are most likely to occur.
Reapply hairspray as needed
Throughout the day, your hair may start to lose its hold. If this happens, reapply hairspray as needed to keep your hair in place.
Avoid overusing hairspray
While hairspray can be helpful for controlling flyaways, it’s important to avoid overusing it. Too much hairspray can make your hair look stiff and unnatural.
Finish with Texturizing Spray
To complete the stacked angled bob, a texturizing spray can be used to add volume, separation, and definition to the hair. Here’s a step-by-step guide on how to apply texturizing spray:
- Shake the can thoroughly: Before using the texturizing spray, shake the can vigorously to ensure the ingredients are evenly distributed.
- Hold the can 6-8 inches away from the hair: Maintaining the proper distance between the can and the hair is crucial for avoiding over-spraying and achieving a natural-looking result.
- Spray in short bursts: To avoid weighing down the hair or creating a crunchy texture, spray in short, controlled bursts rather than prolonged streams.
- Target the roots and mid-lengths: Focus on spraying the texturizing spray at the roots and mid-lengths of the hair, where it will enhance volume and create the desired stacked effect.
- Brush or finger-comb through the hair: Once the texturizing spray has been applied, use a brush or your fingers to gently distribute the product evenly throughout the hair.
- Allow the hair to air-dry or blow-dry on a low heat setting: Allow the hair to air-dry naturally or blow-dry it on a low heat setting to preserve the volume and texture created by the texturizing spray.
| Tips for Using Texturizing Spray |
|---|
| Use a light hand and avoid over-applying the spray, as this can weigh down the hair. |
| Experiment with different texturizing spray formulas to find the one that best suits your hair type and desired effect. |
| Apply the spray to damp hair for a more defined and structured look, or to dry hair for a more natural and voluminous finish. |
Adjust and Refine the Style
Once you have established the baseline shape, it’s time to fine-tune the style to suit the individual’s face shape and preferences. Here are some additional considerations for refining the angled bob:
Face Shape
The angle of the bob can be adjusted to complement different face shapes. For example, a sharp angle with a shorter length can create the illusion of a longer face, while a more gradual angle with a longer length can balance out a rounder face.
Hair Texture
The texture of the hair also plays a role in determining the best angle for the bob. Thicker hair may require a more pronounced angle to avoid looking bulky, while finer hair can benefit from a more subtle angle to add volume.
Personal Preference
Ultimately, the decision of how to angle the bob should be guided by personal preference. The individual may prefer a more dramatic or a more subtle effect, depending on their personality and style.
Maintenance Requirements
It’s important to consider the maintenance requirements for the bob before committing to a certain angle. A sharp angle will require more frequent trims to maintain the shape, while a more gradual angle may be more forgiving.
Stacking the Bob
Stacking refers to creating layers within the bob that graduate in length, creating a fuller and more textured look. Stacking can be added to both straight and angled bobs, and the placement and intensity of the layers can be adjusted to create different effects.
When stacking a bob, the layers can be placed anywhere from the chin to the nape of the neck. Shorter layers can be used to create a more dramatic and voluminous look, while longer layers can add movement and texture.
Here is a table summarizing the key considerations for adjusting and refining a stacked angled bob:
| Consideration | Options |
|---|---|
| Face shape | Sharp angle for longer faces, gradual angle for rounder faces |
| Hair texture | Pronounced angle for thicker hair, subtle angle for finer hair |
| Personal preference | Dramatic or subtle angle based on personal style |
| Maintenance | Sharp angle requires more frequent trims, gradual angle is more forgiving |
| Stacking | Layers graduated in length to create volume and texture |
Maintain and Style Regularly
The following tips will help you maintain and style your stacked angled bob:
1. Wash your hair regularly with a gentle shampoo and conditioner.
2. Use a heat protectant spray before blow drying or styling your hair.
3. Blow dry your hair using a round brush to create volume and shape.
4. Use a flat iron to smooth out any frizz or flyaways.
5. Use a texturizing spray to add volume and hold.
6. Cut your hair every 6-8 weeks to maintain the shape and length.
7. Color your hair as desired.
8. Use a leave-in conditioner to hydrate and protect your hair.
9. Avoid using harsh chemicals or heat styling tools too often.
10. Here are some additional tips for styling a stacked angled bob:
a. Use a volumizing mousse or spray to create volume at the roots.
b. Backcomb the top layer of hair to add height.
c. Use a flat iron to flip the ends of your hair under for a sleek and polished look.
d. Use a curling iron to create loose waves or curls.
e. Use a hairspray to hold your style in place.
How to Direct Hair for a Stacked Angled Bob
A stacked angled bob is a versatile and stylish haircut that can be customized to suit any face shape. The key to getting the perfect stacked angled bob is to direct the hair correctly during the cutting process. Here are step-by-step instructions on how to direct hair for a stacked angled bob:
- Start by sectioning the hair into four quadrants. The front section should be from the top of the forehead to the crown of the head, and the back section should be from the crown of the head to the nape of the neck. The two side sections should be divided from the front section to the back section.
- Divide the front section into two equal triangles, with the point of each triangle at the crown of the head. Direct the hair from the front section downward and forward, towards the face.
- Divide the back section into two equal triangles, with the point of each triangle at the nape of the neck. Direct the hair from the back section upward and backward, towards the back of the head.
- Direct the hair from the side sections downward and forward, towards the face. Make sure that the hair from the side sections is blended into the hair from the front and back sections.
- Once you have directed the hair correctly, cut the hair to the desired length. The hair should be shorter in the back and sides, and longer in the front.
People Also Ask
How do you style a stacked angled bob?
There are many different ways to style a stacked angled bob. You can wear it sleek and straight, or add some waves or curls. You can also add some texture to the hair by using a texturizing spray or mousse.
How do you cut a short stacked bob?
To cut a short stacked bob, you will need to follow the same steps as outlined above. However, you will need to cut the hair shorter in the back and sides. The hair should be no longer than 2 inches in the back, and no longer than 3 inches in the sides.
How do you cut a stacked bob with layers?
To cut a stacked bob with layers, you will need to add some layers to the hair. You can do this by cutting the hair at different lengths. The hair should be shorter in the back and sides, and longer in the front. You can also add some layers to the top of the head to add some volume.
