Your iPhone is near and dear to you. That’s why getting it wet can be so unnerving. However, if you acted quickly, you can get water out of your iPhone without causing any damage. The first step is to turn off your iPhone and remove all cables and accessories. Next, use a soft cloth to gently pat your iPhone dry. Then, place your iPhone in a sealed bag filled with uncooked rice. The rice will help absorb the moisture from your iPhone.
After 24-48 hours, remove your iPhone from the rice and check if it is dry. If it is, turn it back on. If your iPhone is still wet, you can try using a hair dryer to blow dry it. However, be sure to hold the hair dryer at least 6 inches away from your iPhone and do not use heat. If you have tried all of these methods and your iPhone is still wet, you should take it to a professional for repair.
Getting water out of your iPhone can be a stressful experience. However, by following these steps, you can increase the chances of saving your iPhone without causing any damage. Just remember to act quickly and do not try to turn on your iPhone until it is completely dry.
Turn Off and Unplug Your iPhone
If your iPhone has come into contact with water, it’s crucial to act quickly to prevent further damage. Here’s a step-by-step guide on how to turn off and unplug your iPhone:
Step 1: Turn Off Your iPhone Immediately
If possible, turn off your iPhone immediately. This will help prevent any electrical shorts that could potentially damage the device. To turn off your iPhone, press and hold the power button until the “slide to power off” slider appears. Swipe the slider to the right to turn off your iPhone. If the power button is not working due to water damage, you can force restart your iPhone by pressing and holding the power button and the volume down button simultaneously for about 10 seconds.
Step 2: Unplug All Cables and Accessories
Once your iPhone is turned off, disconnect all cables and accessories, including the charging cable, headphones, and any other devices connected to your iPhone. This will help prevent any further electrical damage. If any cables or accessories are wet, dry them thoroughly before reconnecting them to your iPhone.
Step 3: Remove the SIM Card and Memory Card (If Applicable)
If your iPhone has a removable SIM card or memory card, remove it carefully. This will help prevent any further damage to the cards. Wipe them down with a clean, dry cloth and let them air dry completely before reinserting them into your iPhone.
| Step | Action |
|—|—|
| 1 | Turn off your iPhone immediately. |
| 2 | Unplug all cables and accessories. |
| 3 | Remove the SIM card and memory card (if applicable). |
Remove Any Case or Screen Protector
Before attempting to remove water from your iPhone, it is essential to remove any protective case or screen protector that may be covering the device. These accessories can trap water and make it more difficult to access and dry the affected areas of the iPhone.
To remove the case, gently pry it off the phone starting from one corner. Be careful not to damage the phone or the case in the process. If the case is particularly resistant, you may need to use a thin tool such as a plastic card or spudger to carefully loosen it.
For screen protectors, gently lift one corner of the protector and peel it off the screen. Avoid using your fingers directly on the adhesive side of the protector, as this can transfer oils or dirt that may interfere with reapplying the protector later.
Once the case and screen protector are removed, you can proceed with the following steps to dry out your iPhone.
Shake Your Phone to Dislodge Water
Gently shake your iPhone up and down several times. This will help dislodge any water that may have gotten inside the device. Be sure to point the charging port downwards so that any water can drain out.
Repeat this step several times until you no longer see any water coming out of the charging port.
If you have a case on your iPhone, remove it before shaking the device. This will allow the water to drain out more easily.
Tips for Shaking Your iPhone to Dislodge Water
Here are some tips for shaking your iPhone to dislodge water effectively:
- Shake the device gently up and down, not side to side.
- Point the charging port downwards so that any water can drain out.
- Repeat this step several times until you no longer see any water coming out of the charging port.
- If you have a case on your iPhone, remove it before shaking the device.
| Tip | Description |
|---|---|
| Shake gently up and down | This will help dislodge water without damaging the device. |
| Point charging port downwards | This will allow water to drain out easily. |
| Repeat until no water comes out | Ensure all water is removed to prevent further damage. |
| Remove case before shaking | The case can obstruct water drainage. |
Use a Vacuum Cleaner to Suck Out Water
If you have access to a vacuum cleaner, you can use it to suck out water from your iPhone. First, make sure that the vacuum cleaner is set to a low suction setting. Then, place the vacuum cleaner nozzle over the charging port or headphone jack. Be careful not to insert the nozzle too far into the phone, as this could damage the device. Turn on the vacuum cleaner and allow it to suck out the water for 10-15 seconds. Once the water has been removed, turn off the vacuum cleaner and wipe down the phone with a dry cloth.
Tips for Using a Vacuum Cleaner to Remove Water from Your iPhone
- Make sure that the vacuum cleaner is set to a low suction setting.
- Do not insert the vacuum cleaner nozzle too far into the phone.
- Turn on the vacuum cleaner and allow it to suck out the water for 10-15 seconds.
- Turn off the vacuum cleaner and wipe down the phone with a dry cloth.
Use Rice to Absorb Moisture
Rice is a natural desiccant, meaning it absorbs moisture. This makes it an effective way to dry out a wet iPhone. To use rice to absorb moisture from your iPhone:
1. Turn off your iPhone and remove any accessories.
2. Place your iPhone in a container filled with uncooked rice.
3. Cover the iPhone completely with rice.
4. Seal the container and place it in a warm, dry location.
5. **Leave the iPhone in the rice for at least 24 hours, although 48 hours is preferred. The longer the iPhone is in the rice, the more moisture will be absorbed.**
6. After 24-48 hours, remove the iPhone from the rice and inspect it for any remaining moisture.
7. If the iPhone is still wet, repeat the process for another 24-48 hours.
**Tips for using rice to absorb moisture:**
– Use uncooked rice, as cooked rice may contain moisture.
– Place the iPhone in a sealed container to prevent moisture from entering the device.
– Place the container in a warm, dry location to speed up the drying process.
– Leave the iPhone in the rice for at least 24 hours, although 48 hours is preferred.
– If the iPhone is still wet after 48 hours, repeat the process for another 24-48 hours.
Use Silica Gel Packets to Dry Out Your Phone
What You’ll Need:
- Silica gel packets
- A sealable container (e.g., a plastic bag or airtight box)
Step-by-Step Instructions:
- Remove Your Phone from Water: Immediately remove your phone from the water and power it off.
- Wipe Down Your Phone: Use a soft, absorbent cloth to gently wipe down the exterior of your phone, removing any excess water.
- Open Up Your Phone (Optional): If possible, remove the battery and SIM card from your phone to increase airflow.
- Place in a Sealable Container: Place your phone in a sealable container along with the silica gel packets.
- Seal the Container: Close the container tightly to create an airtight environment.
- Wait for 24-48 Hours: Allow your phone to sit in the sealed container with the silica gel packets for at least 24 hours, preferably 48 hours. The silica gel packets will absorb moisture from the phone, gradually drying it out.
Tips:
- Use multiple silica gel packets to ensure maximum absorption.
- If silica gel packets are not available, you can use dry rice or uncooked oatmeal as an alternative.
- Do not attempt to use a hairdryer or other heat source to dry your phone, as this could damage the device.
Place Your Phone in a Bag of Uncooked Rice.
This is a classic method that has been used for years to absorb moisture from electronic devices. Rice is a natural desiccant, meaning it absorbs moisture. To use this method:
1. Turn off your phone and remove any accessories.
2. Place your phone in a bag of uncooked rice.
3. Seal the bag and place it in a warm, dry place.
4. Leave your phone in the rice for at least 24 hours, or longer if possible.
5. Remove your phone from the rice and check for moisture.
6. If your phone is still wet, repeat steps 2-5.
7. Once your phone is dry, turn it on and check for any damage.
Here are some additional tips for using this method:
- Use white rice, as brown rice may contain moisture.
- Place the rice in a sealable bag, such as a Ziploc bag.
- Place the bag of rice in a warm, dry place, such as a sunny windowsill or near a heat source.
- Leave the phone in the rice for at least 24 hours, or longer if possible.
- If your phone is still wet after 24 hours, repeat steps 2-5.
- Once your phone is dry, turn it on and check for any damage.
Contact Apple Support
If you have tried the above methods but your iPhone is still not working properly, you can contact Apple Support for further assistance. They may be able to provide you with additional troubleshooting steps or arrange for a repair if necessary.
To contact Apple Support, you can:
| Method | Instructions |
|---|---|
| Phone | Call Apple Support at 1-800-MY-APPLE (1-800-692-7753) |
| Online | Visit the Apple Support website and click on the “Contact Support” button |
| Apple Store | Visit your local Apple Store and speak to a Genius |
When you contact Apple Support, be sure to have your iPhone’s serial number ready. You can find your serial number on the back of your iPhone or in the Settings app.
Apple Support may also ask you to provide a description of the problem you are experiencing and any steps you have already taken to troubleshoot it. The more information you can provide, the better Apple Support will be able to help you.
Use a Wireless Charger to Power Up Your Phone
It’s a valid concern to worry about damaging your iPhone after accidentally getting it wet. The good news is that getting water out of your phone is possible, and one of the effective ways to do it is by using a wireless charger. Here’s a step-by-step guide on how to do it:
1. Turn Off Your Phone
As soon as your iPhone gets wet, turn it off immediately. This will help prevent any further damage to the internal components.
2. Remove Any Accessories
Take off any accessories such as cases, screen protectors, or headphones from your iPhone.
3. Wipe Down the Exterior
Use a clean, dry cloth to gently wipe down the exterior of your iPhone, removing any visible water droplets.
4. Place Your Phone in a Dry Environment
Find a warm, dry place to place your iPhone. Avoid using a hairdryer or other heat sources, as this can damage the internal components.
5. Use a Wireless Charger
Position your iPhone on a wireless charger and let it charge for at least 24 hours. The wireless charging process will help draw out any moisture from the phone.
6. Monitor Your Phone’s Status
Keep an eye on your phone as it charges. If you notice any unusual behavior, such as overheating or flickering, stop charging immediately and contact Apple Support.
7. Wait at Least 24 Hours
After 24 hours of charging, turn on your iPhone and check if it’s working properly. If it’s still not working, repeat the charging process for another 24 hours.
8. Contact Apple Support
If your iPhone still doesn’t work after multiple charging attempts, contact Apple Support for further assistance.
9. Tips for Using a Wireless Charger
-
Use a reputable brand: Choose a wireless charger from a reputable manufacturer to ensure it’s safe and efficient.
-
Place your phone correctly: Make sure your iPhone is properly aligned on the charger.
-
Monitor the charging process: Keep an eye on your phone’s temperature and behavior during charging.
-
Ventilate the area: Ensure the area where you’re charging your phone is well-ventilated to prevent overheating.
-
Avoid excessive charging: Don’t leave your phone on the charger for extended periods after it’s fully charged.
Monitor Your Phone for Any Signs of Damage
After retrieving your phone from the water, it’s crucial to carefully monitor it for signs of damage. Here’s a comprehensive guide to help you assess the situation:
- Water in the Speaker Grilles: Place your phone face down and gently shake it to see if water droplets emerge from the speaker grilles. If they do, use a cotton swab to absorb them.
- Condensation on the Display: Inspect the screen for any condensation or fogging. If present, turn your phone off and leave it in a warm, dry place to evaporate the moisture.
- Button Responsiveness: Check if all the buttons on your phone, including the Power and Volume buttons, are working correctly.
- Charging Port: Connect a charging cable to see if the phone charges properly. Any resistance or sparking indicates water damage.
- Camera Lens: Examine the camera lens for any smudges or fogginess. Water trapped inside the lens can impair image quality.
- Touchscreen Functionality: Test the touchscreen’s responsiveness by tapping, swiping, and typing. Any lag or unresponsiveness may indicate water damage.
- Battery Life: Monitor your phone’s battery life closely. If it drains rapidly or fluctuates erratically, it could be a sign of water damage to the battery.
- Other Unusual Behavior: Observe if your phone exhibits any other unusual behavior, such as overheating, freezing, or random shutdowns. These could all be indicators of internal water damage.
- Troubleshooting: If you suspect water damage, it’s essential to address the issue promptly. Refer to the manufacturer’s instructions for specific troubleshooting steps.
- Professional Repair: If all else fails, seek professional repair to diagnose and fix any water damage. This is especially important for major components like the motherboard or battery.
| Sign of Damage | Potential Consequences |
|---|---|
| Water in Speaker Grilles | Muffled or distorted sound |
| Condensation on Display | Impaired visibility, touch sensitivity issues |
| Unresponsive Buttons | Difficulty using the phone’s functions |
| Charging Port Issues | Unable to charge or connect to accessories |
| Blurry Camera Lens | Reduced image quality, potential lens damage |
| Unresponsive Touchscreen | Difficulty using the phone’s interface |
| Rapid Battery Drain | Limited phone usage, potential fire hazard |
| Unusual Behavior | Difficult to diagnose, may cause further damage |
How to Get Water Out of Your iPhone
If your iPhone has been exposed to water, it’s important to act quickly to prevent damage. Here are a few steps you can follow:
- Turn off your iPhone. This will help prevent any further damage to the electrical components.
- Remove any accessories. This includes the SIM card, memory card, and case.
- Dry the outside of your iPhone. Use a soft, absorbent cloth or paper towels to gently pat the outside of your iPhone dry.
- Place your iPhone in a bowl of uncooked rice. The rice will help absorb any moisture from the inside of your iPhone.
- Leave your iPhone in the rice for at least 24 hours. Do not turn it on or plug it in during this time.
- After 24 hours, remove your iPhone from the rice and inspect it for any signs of damage. If your iPhone is still wet, you can repeat steps 4-6.
- If your iPhone shows no signs of damage, turn it on and test it to make sure it’s working properly.
People Also Ask
How do I know if my iPhone has water damage?
There are a few signs that may indicate your iPhone has water damage, including:
- The screen is black or distorted.
- The battery is draining quickly.
- The iPhone is making a buzzing or crackling sound.
- The iPhone is not charging.
- The iPhone is overheating.
What should I do if my iPhone has water damage?
If you think your iPhone has water damage, it’s important to act quickly to prevent further damage. Follow the steps outlined above to dry out your iPhone and assess the damage.
Can I fix my iPhone if it has water damage?
Depending on the severity of the water damage, you may be able to fix your iPhone yourself. However, if the damage is extensive, you may need to take your iPhone to a professional for repair.
