The American flag is a strong image of our nation’s values and beliefs. It’s a reminder of the sacrifices which have been made to guard our freedoms and a beacon of hope for the longer term. As such, you will need to show the flag with respect and in accordance with the Flag Code. A technique to do that is to hold the flag vertically.
There are just a few other ways to hold the flag vertically. A technique is to make use of a flagpole adapter. This machine suits onto the highest of a daily flagpole and permits you to dangle the flag vertically. One other solution to dangle the flag vertically is to make use of a wall-mounted flag bracket. This bracket is connected to the wall and has a hook or rod from which the flag will be hung.
Irrespective of which technique you select, be sure you observe the Flag Code when hanging the flag vertically. The Flag Code states that the flag must be displayed with the union (the blue area with 50 stars) on the high and the stripes hanging down. The flag also needs to be flown at half-staff on Memorial Day and different days of mourning.
Vertical Flag Pointers
When displaying the American flag vertically, it is vital to stick to the next pointers to make sure correct decorum:
-
Orientation:
The flag must be hung with the blue union (the sector of stars) on the high, and the purple and white stripes hanging vertically to the suitable. If the flag is held on a wall, the union must be on the left facet as seen from the entrance.
For a vertical show, the flag must be at the least so long as it’s broad, with a minimal width of 20 inches. If the flag is flown outdoors, it must be at the least 6 toes broad and 10 toes lengthy.
When hanging the flag vertically, it is vital to make sure that the union is clearly seen and that the stripes circulation naturally in direction of the underside. Keep away from obscuring the flag with different objects or hanging it in a method that distorts its form.
Choosing the Correct Flag
Selecting the Right Dimension
The vertical positioning of an American flag necessitates a distinct measurement than its horizontal counterpart. The ratio for a vertical flag must be 2:3, whereas the horizontal flag follows a ten:19 ratio.
Check with the desk beneath for particular measurements primarily based on the variety of stars:
| Variety of Stars | Top (ft.) | Width (ft.) |
|---|---|---|
| 13 | 3 | 2 |
| 15 | 3.5 | 2.5 |
| 20 | 4 | 3 |
| 25 | 4.5 | 3.5 |
| 30 | 5 | 4 |
Materials Issues
For a vertical flag supposed for out of doors show, sturdy supplies like nylon or polyester are beneficial. These materials can stand up to the weather and preserve their vibrant colours over time. For indoor use, a lighter materials like cotton will be appropriate.
Flag Orientation
When hanging a vertical American flag, make sure that it’s displayed with the celebrities on the high and the stripes on the right-hand facet (when dealing with the flag). That is the proper orientation for a vertical flag, versus a horizontal flag the place the celebrities are positioned within the higher left nook.
Measuring the Wall and Flag
Measuring the Wall
To make sure a exact and aesthetically pleasing show, it’s essential to measure the wall the place you plan to hold the flag. Use a measuring tape to find out its width and peak, from the ground to the ceiling.
Measuring the Flag
Retrieve the American flag you propose to hold vertically and lay it out flat on a desk or different even floor. Measure the width (size of the stripes) and peak (peak of the blue area) of the flag utilizing a measuring tape.
Figuring out the Optimum Placement
To realize a balanced and visually interesting association, observe these pointers:
- Centering: Place the flag within the middle of the wall horizontally (centered between the left and proper edges) and vertically (centered between the ground and ceiling).
- Flag’s Top vs. Wall’s Top: The flag’s peak must be roughly two-thirds to three-quarters of the wall’s peak. This proportion creates a visually harmonious show.
- Star Subject Placement: For a vertical show, the blue star area must be positioned on the higher proper nook of the flag when seen from the entrance. This orientation represents the place of the celebrities within the night time sky.
- Adjusting for Non-Normal Wall Sizes: If the wall’s peak or width just isn’t appropriate for a standard-sized flag, you might must buy a custom-sized flag or modify its placement accordingly.
Here’s a desk summarizing the beneficial proportions for hanging a flag vertically:
| Wall Top | Really helpful Flag Top |
|---|---|
| 6-8 toes | 4-6 toes |
| 9-12 toes | 6-9 toes |
| Over 12 toes | Customized-sized flag beneficial |
Figuring out the Top and Width
To find out the suitable peak and width for a vertically hung American flag, contemplate the next pointers:
Flagpole Top
The flagpole peak must be at the least 1.5 occasions the flag’s peak. For instance, a 3′ x 5′ flag would require a flagpole peak of at the least 4.5′.
Flag Width
The flag’s width must be roughly 7/10 of its peak. A 3′ x 5′ flag has a width of seven/10 x 3′ = 2.1′.
Flag Facet Ratio
The flag’s facet ratio (peak to width ratio) must be 1.9:1. Which means for each 1.9 inches of peak, there must be 1 inch of width.
| Flag Dimensions | |
|---|---|
| Top | Width |
| 3′ | 2.1′ |
| 4′ | 2.8′ |
| 5′ | 3.5′ |
Marking the Middle Level
To make sure the flag hangs appropriately and symmetrically, it’s essential to mark the middle level. Observe these steps to precisely find the middle:
1. Measure the Top
Utilizing a measuring tape or ruler, decide the general peak of the flag from high to backside.
2. Divide by Two
Divide the peak measurement by two to seek out the midway level. This will provide you with the approximate location of the middle.
3. Mark the Again
Flip the flag over to the again facet. Utilizing a material marker or chalk, mark the middle level on the again of the flag utilizing a straight line.
4. Create a Assist
If you’re hanging the flag on a floor that doesn’t have a vertical assist, reminiscent of a wall, you’ll need to create a assist rod. This could be a picket dowel, metallic rod, or another sturdy materials that may maintain the flag in place.
5. Dangle the Rod
Connect the assist rod to the floor, making certain that it’s stage. Align the rod with the middle line you marked on the again of the flag. The rod will act because the anchor level for hanging the flag vertically.
Utilizing String or Measuring Tape
Marking the High of the Flag
1. Lay the flag flat on a clear floor.
2. Fold the flag in half lengthwise, bringing the star area and stripes collectively.
3. Crease the middle fold from high to backside, securing it with binder clips or tape.
4. Unfold the flag, leaving the middle crease seen.
5. Discover the middle of the highest fringe of the flag by measuring it from both facet.
6. Lower a chunk of string or measuring tape to the size you want for the flag’s hanging peak.
7. Fold the string or tape in half and mark the midpoint.
8. Place the midpoint of the string or tape on the middle of the highest fringe of the flag, aligning it with the middle crease.
9. Tape or clip the string or tape to the flag, leaving a loop on the high for hanging.
Securing the Flag
1. Tie a knot on the finish of the string or tape to create a loop.
2. Hook the loop onto a hook or nail pushed into the wall.
3. Regulate the string or tape to make sure the flag hangs vertically and the stripes are parallel to the ground.
Hanging the Flag with Nails or Hooks
Hanging the American flag vertically requires particular measurements and methods to make sure it’s displayed respectfully and correctly. When utilizing nails or hooks for vertical hanging, observe these steps:
1. Decide the Middle of the Flag
Fold the flag in half lengthwise, then in half once more widthwise. The intersection of the folds marks the middle of the flag.
2. Mark the Wall
Measure the space from the ceiling to the ground the place the flag ought to dangle. Divide this measurement by two and mark this level on the wall.
3. Discover the Flag’s High Edge
Measure the peak of the flag and subtract 2 inches. That is the space from the highest of the pole to the highest of the flag.
4. Mark the Flag’s High Edge on the Wall
Measure down from the marked level on the wall by the peak calculated in step 3. That is the place the highest fringe of the flag must be hung.
5. Drive Nails or Insert Hooks
Drive two nails or insert two hooks into the wall, spaced evenly about 6 inches aside. The nails or hooks must be on the peak marked in step 4.
6. Connect the Pole to the Nails or Hooks
Insert the flagpole into the rings or grommets on the highest fringe of the flag. Dangle the flag by looping the pole over the nails or hooks on the wall.
7. Place the Flag Appropriately
Be sure that the celebrities on the flag are dealing with the highest and that the blue area is on the left facet of the observer. The stripes ought to dangle vertically and be parallel to the wall.
| Star Subject | Stripe Subject |
|---|---|
| High | Backside |
| Left | Proper |
Extra Suggestions for Stability
8. Safe the Rope to the Pole Utilizing a Knot
There are various several types of knots that can be utilized to safe a rope to a pole. Nevertheless, not all knots are created equal. When selecting a knot, you will need to contemplate the next components:
- The energy of the knot: The knot ought to have the ability to stand up to the pressure of the wind and the burden of the flag.
- The benefit of tying the knot: The knot must be simple to tie, even in sturdy winds.
- The sturdiness of the knot: The knot ought to have the ability to stand up to the weather and repeated use.
Primarily based on these components, there are three knots which might be generally used to safe a rope to a pole:
- The clove hitch: The clove hitch is an easy and safe knot that’s simple to tie. It’s generally used to safe a ship to a dock or to tie a rope to a tree.
- The sq. lashing: The sq. lashing is a robust and sturdy knot that’s superb for securing a rope to a pole. It’s generally used to construct constructions reminiscent of bridges and fences.
- The taut-line hitch: The taut-line hitch is a flexible knot that can be utilized to safe a rope to a pole or to regulate the strain of a rope. It’s generally used to tie down a tent or to safe a load to a truck.
Upon getting chosen a knot, observe these steps to safe the rope to the pole:
- Cross the rope across the pole and produce the ends collectively.
- Tie the knot in line with the directions.
- Pull on each ends of the rope to tighten the knot.
- Trim any extra rope.
Hanging the Flag in Outside Areas
When displaying the American flag vertically, it must be oriented in order that the blue area with the celebrities is on the left and the stripes are on the suitable from the viewer’s perspective. This orientation ensures that the Union (blue area) is within the right place of honor.
Flagpole Show
- The flag must be flown from a flagpole that’s tall sufficient for the flag to fly freely with out touching the bottom or another objects.
- The flagpole must be sturdy sufficient to resist the wind and climate situations.
- The flag must be raised and lowered in a dignified method.
- The flag must be flown throughout the day, from dawn to sundown, except it’s illuminated at night time.
Wall Show
- The flag must be displayed on a wall or different vertical floor.
- The flag must be hung in order that the blue area with the celebrities is on the high.
- The flag must be taut and wrinkle-free.
- The flag shouldn’t be displayed in a method that it may very well be broken or dirty.
Different Issues
- The American flag ought to by no means be flown the other way up besides as a misery sign.
- The American flag shouldn’t be flown in inclement climate, reminiscent of throughout a storm.
- The American flag must be disposed of correctly when it turns into worn or torn.
| Really helpful Flagpole Heights |
|---|
| 15 toes for a 3’x5′ flag |
| 20 toes for a 4’x6′ flag |
| 25 toes for a 5’x8′ flag |
Respecting the American Flag
1. It must be displayed ready of honor.
This implies it must be positioned on the right-hand facet of different flags, or above them if they’re hung vertically.
2. No different flag ought to fly increased than the American flag.
If there’s one other flag flown, it must be positioned on the left or on the similar stage.
3. The flag mustn’t contact the bottom.
If it does, it must be cleaned or changed instantly.
4. The flag shouldn’t be used as clothes or for another objective.
It ought to solely be used for ceremonial or ornamental functions.
5. The flag must be handled with respect.
This implies not folding it up haphazardly or utilizing it as a doormat.
6. The flag must be correctly folded when not in use.
As stipulated by the flag code, the flag is to be folded within the following method:
- Fold the flag lengthwise, bringing the striped finish to the highest and the blue area to the underside.
- Fold the flag in half widthwise, bringing the striped finish to the blue area.
- Tuck the underside nook of the flag up and over the blue area, making a triangle.
- Proceed folding the flag on this method till it’s utterly folded.
7. The flag must be flown at half-mast on sure events.
To point out respect, the flag must be flown at half-mast after the loss of life of a president, vp, or different high-ranking official. It also needs to be flown at half-mast on Memorial Day, and on Peace Officers Memorial Day.
8. The flag must be displayed always of day.
The flag mustn’t solely be displayed throughout the day, it will also be displayed at night time, nevertheless it have to be illuminated.
9. The flag must be correctly saved when not in use.
One of the simplest ways to retailer the flag is in a dry, darkish, and funky place. It also needs to be positioned in a container that may shield it from mud and moisture.
10. The flag must be changed when it’s worn or torn.
To point out respect, the flag shouldn’t be displayed whether it is worn or torn. The next are some particular guidelines for when to interchange the flag:
| Situation | When to Change |
|---|---|
| Fading or fraying | When the colours begin to fade or the material begins to fray |
| Tearing | When there’s a tear or gap within the cloth |
| Soiling | When the flag is soiled or stained |
How To Dangle American Flag Vertically
The American flag is a logo of our nation and our freedom. It must be handled with respect and displayed in a correct method. When hanging the flag vertically, there are some things to remember.
First, the flag must be hung with the blue area on the left and the white stripes on the suitable. The celebrities must be on the high of the flag and the stripes must be hanging down. The flag must be hung at a peak the place will probably be seen to all who move by.
If you’re hanging the flag from a wall, it’s best to use a flagpole or different applicable assist. The flag must be hung from the highest of the employees, and it must be taut sufficient in order that it isn’t wrinkled or sagging.
If you’re hanging the flag from a flagpole, it’s best to be sure that the flagpole is sturdy sufficient to assist the burden of the flag. The flag must be raised to the highest of the pole, and it must be secured with a rope or clasp.
Individuals Additionally Ask
Which Facet of the Flag Faces Out When Displayed Vertically?
When the American flag is displayed vertically, the blue area with the celebrities must be positioned on the left facet of the flag and the white stripes must be on the suitable facet.
How Excessive Ought to I Dangle the Flag When Displayed Vertically?
When the American flag is displayed vertically, it must be hung at a peak the place will probably be seen to all who move by.
Can I Dangle the Flag from My Home or Condo?
Sure, you may dangle the American flag from your own home or condominium. Nevertheless, it’s best to be sure that the flag is displayed in a respectful method and that it isn’t broken or desecrated.
