Featured Picture
[Image of a spinning object with a trail of motion blur]
Within the realm of movement graphics, it is usually fascinating to create objects that appear to maneuver effortlessly and constantly. After Results, a robust movement graphics software program, offers a plethora of instruments to realize this impact. This information will delve into the strategies for creating objects in After Results that exhibit fixed motion, giving your animations a seamless and dynamic really feel.
To kickstart the method, it is important to know the idea of keyframes. Keyframes are like milestones within the animation timeline, marking the beginning and finish of a selected movement. By manipulating the place, rotation, or different properties of an object at completely different keyframes, you’ll be able to create the phantasm of motion. Moreover, After Results presents quite a few built-in results and expressions that may automate the animation course of, simplifying the creation of easy and complicated movement paths.
Incorporating physics ideas into your animations can additional improve the phantasm of pure motion. After Results encompasses a sturdy physics engine that means that you can simulate gravity, friction, and different real-world forces. By making use of these forces to your objects, you’ll be able to create practical animations that reply to collisions, bounce off surfaces, and transfer in a bodily believable method. This degree of element provides depth and credibility to your animations, making them extra participating and lifelike.
Keyframing a Fixed Movement Path
Establishing a relentless movement path for an object in After Results is achieved via a mix of keyframes and the Movement Editor. This is a step-by-step information:
1. Create a New Movement Path:
– Choose the layer you wish to transfer.
– Click on the “Movement Editor” button within the Timeline panel.
– Within the Movement Editor, click on the “Place” property.
– Click on the “Add Place Keyframe” button to create two keyframes on the present time.
2. Set Fixed Velocity:
– Choose the primary keyframe.
– Within the “Movement Editor”, click on the “Velocity” property.
– Enter a relentless velocity worth within the X and Y fields. This worth determines the pace and path of the motion.
| Movement Editor Properties | Description |
|---|---|
| X Velocity | Pace of the item within the X (horizontal) path |
| Y Velocity | Pace of the item within the Y (vertical) path |
3. Prolong Movement Length:
– Choose the second keyframe.
– Drag it to the specified endpoint of the movement path within the Movement Editor timeline.
– This can prolong the period of the movement, whereas sustaining the fixed velocity.
4. Clean Movement:
– To easy the movement transitions between keyframes, click on the “Ease In/Out” drop-down menu within the Movement Editor.
– Choose an acceptable easing curve (e.g., “Ease In and Out”) to manage the acceleration and deceleration.
Working with the Graph Editor
The Graph Editor is a robust software in After Results that means that you can management the motion of your objects over time. It may be used to create easy, natural-looking movement, or to create extra advanced, stylized results. To open the Graph Editor, choose the layer you wish to animate and click on on the “Graph Editor” button within the Timeline panel.
The Graph Editor will show a graph of the chosen layer’s place, rotation, and scale over time. The X-axis of the graph represents time, and the Y-axis represents the worth of the property being animated.
To animate a property, you’ll be able to merely click on on the graph and drag it up or down. It’s also possible to use the keyframes to create extra advanced animations.
Keyframes
Keyframes are factors on the graph that characterize the worth of a property at a selected time. To create a keyframe, merely click on on the graph on the desired time. You possibly can then drag the keyframe up or down to alter the worth of the property.
Keyframes can be utilized to create a wide range of animations. For instance, you need to use keyframes to create an object that strikes from one level to a different, or to create an object that rotates round its axis.
Easing
Easing is a approach to management the pace and acceleration of an animation. After Results presents a wide range of easing presets which you could apply to your animations. To use an easing preset, merely choose the keyframe you wish to ease and click on on the “Easing” menu within the Graph Editor.
Easing can be utilized to create a wide range of results, equivalent to making an object speed up or decelerate easily. The next desk lists a number of the commonest easing presets:
| Identify | Description |
|---|---|
| Linear | The article strikes at a relentless pace. |
| Ease In | The article begins slowly after which accelerates. |
| Ease Out | The article begins shortly after which slows down. |
| Ease In Out | The article begins slowly, accelerates, after which slows down once more. |
| Bounce | The article bounces forwards and backwards. |
Including Velocity to the Movement
To offer a way of acceleration or deceleration to a shifting object, you need to use the “velocity” parameter in After Results. This parameter controls the pace of the item’s motion over time, permitting you to create extra dynamic and practical animations.
1. Choose the Layer
Start by choosing the layer you wish to add velocity to.
2. Apply the Movement Property
Navigate to the “Movement” part of the Properties panel and be certain that the “Movement” property is enabled.
3. Add Velocity
Find the “Velocity” parameter below the “Movement” property. This parameter controls the pace and path of the item’s motion in pixels per second.
4. Set the Worth
Enter a constructive worth to extend the item’s pace or a destructive worth to lower it. It’s also possible to use the up and down arrows subsequent to the sector to regulate the worth.
5. Specify the Path
In order for you the item to maneuver in a selected path, use the “Path” parameter to specify the angle of motion in levels.
6. Create a Velocity Curve
To create a extra natural-looking motion, you need to use the Velocity Graph editor to create a customized velocity curve. This lets you management the item’s acceleration and deceleration over time.
To entry the Velocity Graph editor, click on on the “Velocity” property and choose “Edit Graph.” A graph will seem, the place you’ll be able to add keyframes to outline the speed at completely different deadlines.
| Level | Description |
|---|---|
| Begin Keyframe | Preliminary velocity in the beginning of the animation |
| Finish Keyframe | Remaining velocity on the finish of the animation |
| Intermediate Keyframes | Intermediate factors that outline the speed curve |
Incorporating Acceleration and Deceleration
When creating motion in After Results, it is vital to think about acceleration and deceleration to make the movement look extra pure. This is methods to obtain this:
1. **Keyframe the Place Property**: Alter the place keyframes on the timeline to create the essential motion.
2. **Alter the Easing**: Within the “Remodel” tab, experiment with completely different easing curves (“Ease In”, “Ease Out”) to create a easy transition between keyframes.
3. **Keyframe the Scale Property**: To create a way of acceleration, barely enhance the dimensions over a number of frames as the topic strikes ahead.
4. **Use Movement Blur**: Allow movement blur within the “Render” tab so as to add a sensible blur impact to the shifting topic.
5. **Incorporate Rotation**: Add refined rotation keyframes to simulate inertia and improve the sense of motion.
6. **Use Expressions**: Make use of expressions to manage the pace and acceleration of the motion dynamically, permitting for higher flexibility.
7. **Comply with-By way of and Anticipation**: Research the pure actions of objects to know how they speed up, decelerate, and anticipate adjustments in path. Incorporate these parts into your animations for added realism.
| Acceleration | Deceleration |
|---|---|
| Keyframe the dimensions property to barely enhance over a number of frames as the topic strikes ahead. | Keyframe the dimensions property to barely lower over a number of frames as the topic slows down. |
| Alter the easing to “Ease In” for a gradual acceleration. | Alter the easing to “Ease Out” for a gradual deceleration. |
| Incorporate refined rotation keyframes to simulate inertia. | Add destructive rotation keyframes to compensate for the “overshoot” impact when the topic decelerates. |
Controlling Movement with Expressions
In After Results, expressions can be utilized to manage the motion of layers. This enables for a variety of potentialities, from easy animations to advanced simulations. There are a lot of alternative ways to make use of expressions, however one of the crucial widespread is to make use of the Time expression to drive the movement of a layer. The Time expression merely returns the present time within the composition, and can be utilized to create a wide range of completely different results, equivalent to:
- Transferring a layer throughout the display at a relentless pace
- Rotating a layer round its middle
- Scaling a layer up and down
Moreover utilizing the Time expression, there are a number of different helpful expressions for controlling movement.
Wiggle Expression
The Wiggle expression provides some randomness to the motion of a layer. This can be utilized to create a extra pure, natural look. The Wiggle expression takes three arguments: the amplitude of the wiggle, the frequency of the wiggle, and the seed of the wiggle.
“`
wiggle(10, 5, 100)
“`
This expression would create a wiggle with an amplitude of 10 pixels, a frequency of 5 Hz, and a seed of 100. The seed determines the place to begin of the wiggle, so altering the seed will change the best way the wiggle appears to be like.
LoopOut Expression
The LoopOut expression repeats a layer’s animation over and over. This can be utilized to create looping animations, equivalent to a bouncing ball or a spinning wheel.
“`
loopOut(“cycle”, 1)
“`
This expression would create a loop that repeats the animation for one second. The “cycle” argument specifies the size of the loop, and the “1” argument specifies the variety of occasions the loop ought to repeat.
Ping Pong Expression
The PingPong expression reverses the path of a layer’s animation when it reaches the tip of the composition. This can be utilized to create back-and-forth animations, equivalent to a pendulum swinging or a ball bouncing.
“`
pingPong(1)
“`
This expression would create a ping-pong impact that lasts for one second. The “1” argument specifies the size of the ping-pong impact.
| Expression | Description |
|---|---|
| Time | Returns the present time within the composition |
| Wiggle | Provides some randomness to the motion of a layer |
| LoopOut | Repeats a layer’s animation over and over |
| PingPong | Reverses the path of a layer’s animation when it reaches the tip of the composition |
Animating Relative to Different Layers
When animating parts in After Results, you’ll be able to select to have them transfer relative to different layers within the composition. This may be helpful for creating advanced animations the place parts transfer collectively or in relation to one another.
To animate a component relative to a different layer, choose the component after which click on on the “Remodel” tab within the Timeline panel. Within the “Place” part, you will notice the “X Place” and “Y Place” properties. These properties management the horizontal and vertical place of the component, respectively.
To make the component transfer relative to a different layer, click on on the “Decide Whip” icon subsequent to the “X Place” or “Y Place” property. This can open up the Layer Picker window. Within the Layer Picker window, choose the layer that you really want the component to maneuver relative to.
Upon getting chosen the layer, the “Expression” area subsequent to the “X Place” or “Y Place” property will replace to incorporate an expression that references the chosen layer. This expression will trigger the component to maneuver relative to the chosen layer.
| Property | Description |
|---|---|
| X Place | Controls the horizontal place of the component relative to the chosen layer. |
| Y Place | Controls the vertical place of the component relative to the chosen layer. |
You need to use expressions to manage the motion of the component relative to the chosen layer. For instance, you would use an expression to make the component transfer at a sure distance from the chosen layer or to make the component transfer in the identical path as the chosen layer.
Mastering the Timeline for Exact Management
The timeline in After Results is the central hub for controlling the timing and sequencing of your animations. By manipulating the keyframes and layers on the timeline, you’ll be able to create extremely exact and sophisticated motions.
- Set Keyframes: Keyframes are the anchor factors that outline the beginning and finish of an animation. To create a keyframe, merely click on on the diamond-shaped icon to the left of a layer.
- Animate Keyframes: Upon getting created a keyframe, you’ll be able to animate it by dragging it alongside the timeline. This can change the place, rotation, or different properties of the layer at that time limit.
- Alter Keyframe Properties: You possibly can fine-tune the habits of a keyframe by adjusting its properties. These properties embrace easing, pace, and interpolation.
- Scrub the Timeline: To preview your animation, scrub the timeline by dragging the playhead. This can present you the way the animation will play out in actual time.
- Zoom In and Out: Use the +/- buttons or the mouse wheel to zoom out and in on the timeline. This can show you how to see extra element or get a broader perspective in your animation.
- Add Markers: Markers are vertical strains that may be positioned on the timeline to point particular deadlines. They can be utilized for reference or to set off occasions.
- Use Time Remapping: Time remapping means that you can change the pace or path of animation at particular factors on the timeline. This could create attention-grabbing results equivalent to sluggish movement or reverse playback.
- Set Layer Order: The order of layers on the timeline determines which layers are drawn on high of one another. This could have an effect on the visible hierarchy of your animation.
- Lock Tracks: If you wish to stop sure tracks from being modified, you’ll be able to lock them by clicking the lock icon subsequent to the monitor title.
- Create and Edit Footnotes: Footnotes are textual content notes that may be hooked up to keyframes. They can be utilized to supply extra data or directions.
Learn how to have issues in After Results have fixed motion
Fixed motion is an impact that creates the phantasm of an object shifting with out ever stopping. It may be used to create a wide range of results, from a refined shimmer to a full-blown animation. To create fixed motion, you’ll need to make use of the next steps to:
- Create a brand new composition in After Results.
- Import your footage or create a brand new layer.
- Choose the layer you wish to animate.
- Click on on the “Impact” menu and choose “Distort” > “Wiggle”.
- Within the “Wiggle” impact settings, regulate the next parameters to fit your wants:
- “Amplitude” controls the quantity of motion.
- “Frequency” controls the pace of the motion
- “Chaos” provides randomness and noise to the motion.
- Click on on the “OK” button to use the impact.
- Preview your animation to be sure you are pleased with the outcomes.
- Create two layers in your composition.
- Choose the primary layer and add a keyframe for the “Opacity” property.
- Choose the second layer and add a keyframe for the “Opacity” property similtaneously the primary keyframe.
- Transfer the playhead to the tip of the composition.
- Choose the primary layer and add a keyframe for the “Opacity” property on the finish of the composition.
- Choose the second layer and add a keyframe for the “Opacity” property on the finish of the composition.
- Alter the keyframes to create a easy transition between the 2 layers.
- Import your sound impact into your mission.
- Drag and drop the sound impact onto the timeline.
- Alter the amount and timing of the sound impact.
- Preview your animation to be sure you are pleased with the outcomes.
Folks additionally ask about How To Have Issues In After Results Have Fixed Motion
How do I create a easy transition in After Results?
To create a easy transition in After Results, you need to use the next steps:
How do I add sound results to my After Results mission?
So as to add sound results to your After Results mission, you need to use the next steps:
