5 Easy Steps: How to Install a Delta Shower Faucet

Delta Shower Faucet
$title$

Installing a new shower faucet can be a great way to update your bathroom and improve its functionality. Delta faucets are known for their quality and durability, and their shower faucets are no exception. However, before you start, it’s important to make sure that you have the right tools and materials. You’ll need a screwdriver, a wrench, some pliers, and some Teflon tape. You’ll also need to purchase a new shower faucet and trim kit.

Once you have all of your tools and materials, you can begin the installation process. The first step is to remove your old shower faucet. To do this, simply unscrew the nuts that are holding it in place and pull it out of the wall. Once the old faucet is removed, you can install the new one. To do this, simply insert the new faucet into the hole in the wall and tighten the nuts until it is secure.

Next, you’ll need to install the trim kit. The trim kit includes the handles, escutcheons, and other decorative pieces that will give your new shower faucet its finished look. To install the trim kit, simply snap the pieces into place. Once the trim kit is installed, your new shower faucet will be ready to use.

Tools and Materials Required

To ensure a successful Delta shower faucet installation, it’s essential to gather the necessary tools and materials. Here’s a comprehensive list to assist you:

Basic Tools:

Adjustable wrench
Channel-type pliers
Hex wrench (Allen key)
Slip-joint pliers
Teflon tape
Plumber’s putty
Measuring tape
Level
Safety glasses

Materials:

Item	Description
Delta shower faucet	The new faucet to be installed
Valve cover trim	The decorative plate covering the valve
Handle(s)	The lever(s) controlling water flow
Showerhead	The nozzle that sprays water
Shower arm	The pipe connecting the showerhead to the wall
Escutcheon	The plate around the base of the shower arm

Step 1: Shut Off Water and Remove Old Faucet

Before touching any plumbing, locate the water shut-off valves underneath the sink. Turn both valves clockwise to stop the flow of water to the faucet. Next, use a basin wrench to loosen the nuts holding the old faucet in place. Be careful not to damage the metal finish of the faucet or sink. Gently wiggle the faucet side to side and pull it straight up to remove it from the sink.

Remove the Delta Trim Kit

The Delta trim kit consists of the handle, escutcheon, and cap. Use a small screwdriver or Allen wrench to remove the handle screws and pull the handle straight off. The escutcheon should now be loose enough to lift off by hand or with a putty knife. Finally, remove the cap by unscrewing it or prying it off with a flat-head screwdriver.

Disconnect the Old Delta Faucet

Once the trim kit is removed, you can access the cartridge and supply lines. Use a wrench or pliers to disconnect the supply lines from the cartridge. Depending on your faucet model, you may need to use a cartridge puller to extract the cartridge from the housing. Remove the old cartridge and set it aside.

Delta Faucet Model	Cartridge Puller Required
13/14 Series	No
17 Series	Yes
400 Series	No
500 Series	Yes
600 Series	No
700 Series	Yes

3. Install Escutcheon and Handle

a. Install Escutcheon

Place the escutcheon, the decorative cover plate, over the shower valve body and align it with the screw holes. Use a Phillips head screwdriver to tighten the screws until the escutcheon is snugly in place.

b. Install Handle

Locate the handle set screw on the back of the handle. Remove this screw using a hex key wrench. Slide the handle onto the valve stem, ensuring it is aligned correctly. Replace the handle set screw and tighten it securely.

c. Test the Handle

Turn on the water supply and operate the handle to verify smooth operation. The water should flow smoothly without any leaks or drips. If you encounter any issues, check the connections for tightness or any other potential problems.

Tool Required:

Phillips head screwdriver

Hex key wrench

Tool Required:
Phillips head screwdriver
Hex key wrench

Step 3: Attach Trim Kit and Handle

4. Slide the Handle Over the Stem and Secure It

Now that the trim kit is in place, it’s time to install the handle. Align the handle opening in the trim kit with the valve stem. Slide the handle onto the stem, ensuring it fits snugly. Once fully seated, secure the handle by tightening the set screw located on the bottom of the handle with an Allen key.

Additional Tips:

• Use caution when tightening the set screw; overtightening can damage the handle.
• Check the handle’s orientation before securing it. The handle should be aligned vertically when the water is in the “off” position.
• If the handle feels loose after tightening the set screw, gently tap the top of the handle with a hammer or rubber mallet to secure it further.
• For added durability, apply a small amount of plumber’s tape to the threads of the set screw before tightening it.

Cautions	Additional Tips
Avoid overtightening the set screw.	Check handle orientation before securing.
Gently tap the top of the handle to further secure it (if loose).	Apply plumber’s tape to the set screw threads for added durability.

Step 4: Connect Water Lines and Test Function

Connecting the Water Lines

1. Retrieve the braided water supply lines from the package.
2. Hand-tighten one line onto the hot water port on the valve, indicated by a red marking or handle.
3. Repeat for the cold water line, indicated by a blue marking or handle.
4. Use an adjustable wrench to further tighten the connections, but avoid overtightening.

Testing the Function

Before Installing the Handle

1. Turn on both hot and cold water supplies.
2. Check for any leaks at the water supply connections.
3. Observe the water flow to ensure both hot and cold are flowing smoothly.

Installing the Handle

1. Align the handle in the desired position and press it onto the valve stem.
2. Secure the handle with the provided set screw.

Final Function Test

1. Turn on the water again and check for any leaks from the handle or showerhead.
2. Adjust the temperature and flow using the handle to verify its functionality.
3. If everything functions properly, turn off the water supply and proceed with installing the rest of the shower components.

Step 5: Install Showerhead and Secure

Once the shower arm is secured, it’s time to install the showerhead.

Connect the Showerhead to the Arm

Screw the showerhead onto the shower arm by hand until it is hand-tight. Avoid using excessive force to prevent damaging the threads.

Install the Washer and Nut

Place the rubber washer over the showerhead connection point. Slip the large metal nut over the washer and hand-tighten it securely.

Adjust the Angle (Optional)

If you want to adjust the angle of the showerhead, loosen the nut slightly using pliers. Position the showerhead to your desired angle and retighten the nut.

Secure the Joint

To prevent leaks, apply plumber’s tape around the threads of the shower arm where it connects to the showerhead. Wrap the tape tightly, overlapping it by at least half its width.

Screw the shower arm into the showerhead clockwise until completely hand-tight. Use a wrench or pliers for an additional quarter turn to ensure a secure connection.

Caution:
Do not overtighten the joint, as this can damage the threads or the shower arm.

Step 6: Seal and Finish

6. Seal the Escutcheon

Place the escutcheon over the base of the faucet and tighten the screws to secure it. Apply a bead of clear silicone sealant around the perimeter of the escutcheon, where it meets the wall. Smooth the sealant with your finger or a damp cloth to create a watertight seal.

7. Reinstall the Handle

Insert the handle onto the stem and align the indicator mark with the “hot” or “cold” position. Tighten the handle screw to secure it. If your faucet has a double handle, repeat this step for the other handle.

Handle Type	Screw Size
Single Lever	Hex key or Allen wrench
Two Handles	Phillips head screwdriver

8. Finish Up

Once the faucet is installed, turn on the water supply and check for any leaks. If there are any leaks, tighten the connections and reapply sealant as needed. Wipe down the faucet with a soft cloth to remove any excess sealant or debris. Enjoy your new Delta shower faucet!

Troubleshooting Common Issues

1. Water Not Flowing

Check the water supply lines to ensure they are not kinked or obstructed. Verify if the water valve is turned on completely.

2. Low Water Pressure

Clean the aerator by removing it and soaking it in vinegar. Replace the aerator if necessary.

3. Water Leaking from Handle

Tighten the packing nut behind the handle using a wrench. Replace the O-rings if they are worn or leaking.

4. Water Temperature Fluctuating

Adjust the temperature limit stop screw under the handle to prevent scalding.

5. Knocking Noise

Loosen the cartridge retainer nut slightly to reduce pressure.

6. Squeaky Handle

Apply a lubricant to the stem or cartridge to eliminate friction.

7. Handle Broke Off

Remove the trim plate and replace the broken handle with a new one.

8. Cartridge Not Closing Properly

Remove the cartridge and check for any debris. Clean or replace the cartridge if it is damaged or worn. Ensure that the new cartridge is seated correctly before tightening the retainer nut.

9. Shower Head Leaking

Tighten the shower head by hand or using a wrench. Replace the washer if necessary.

10. Water Spraying Erratically

Clean the shower head nozzles using a wire or toothpick to remove any mineral deposits.

Advanced Features and Customization

Customizable Spray Patterns

Delta shower faucets offer a wide range of spray patterns to cater to different showering preferences. From invigorating full-body sprays to gentle, targeted streams, you can choose the perfect setting to suit your needs.

Multi-Function Showerheads

Experience the ultimate in convenience with multi-function showerheads that combine multiple spray modes in a single unit. Switch between rainfall, massage, and targeted sprays with just a simple turn of the dial.

Integrated Handheld Sprayers

Enhance your bathing experience with a handheld sprayer that provides flexibility and pinpoint accuracy. Rinse off shampoos, soap, and hard-to-reach areas effortlessly.

Temperature Control

Delta’s advanced shower faucets feature precise temperature control, allowing you to effortlessly set your desired water temperature. Choose from models with single-handle or dual-handle designs for optimal comfort.

Water-Saving Technology

Conserve water without sacrificing performance with Delta’s water-saving showerheads. Advanced aerators and low-flow designs reduce water consumption while maintaining high-pressure sprays.

Customization Options

Personalize your shower space with a range of customization options. Choose from various finishes, including chrome, brushed nickel, and oil-rubbed bronze, to match your bathroom decor. Many models also offer interchangeable faceplates for a quick and easy update.

Digital Features

Upgrade your shower experience with digital shower controls that include LCD displays, touchscreens, and smartphone connectivity. Monitor water temperature, adjust spray patterns, and create personalized shower profiles for a truly customized bathing experience.

Integrated Lighting

Create a spa-like ambiance with Delta’s integrated lighting showerheads. Choose from models with LED lights that illuminate the shower area, enhancing visibility and adding a touch of luxury.

Voice Control

Maximize convenience with voice-controlled shower faucets. Connect your shower system to a smart device and control temperature, spray patterns, and other features using voice commands.

Additional Tips for Professional Installation

1. Check for leaks and ensure a tight seal

After completing the installation, thoroughly inspect the faucet for any leaks. If you notice any, tighten the connections as necessary. Use Teflon tape to create a secure seal and prevent future leaks.

2. Install the handle and trim

Assemble the handle according to the manufacturer’s instructions and attach it to the faucet body. Then, install the escutcheon plate and trim to conceal the base of the faucet and enhance its aesthetics.

3. Secure the faucet to the wall

Confirm that the faucet is securely mounted to the wall studs using the supplied mounting screws. Ensure a tight fit to prevent movement or loosening over time.

4. Adjust the water flow rate

Utilize the aerator provided with the faucet to adjust the water flow rate to your preference. This feature allows you to conserve water while maintaining a satisfying water stream.

5. Clean the faucet regularly

For optimal performance and a pristine appearance, clean the Delta faucet regularly. Use a mild cleaning solution and a soft cloth to wipe down the surfaces. Avoid harsh chemicals or abrasive cleaners that may damage the finish.

6. Troubleshoot common issues

If you encounter any issues with your Delta faucet, such as leaks, low water pressure, or difficulty turning the handle, refer to the troubleshooting guide provided by the manufacturer. It will assist you in identifying and resolving common problems.

7. Register your warranty

To ensure that your Delta faucet is covered under the manufacturer’s warranty, register your purchase on the company’s website. This registration process will provide you with peace of mind and access to any necessary repairs or replacements.

8. Contact customer support

If you have any further questions or require technical assistance, do not hesitate to contact Delta’s customer support team. They are knowledgeable and experienced professionals who can guide you through the installation process or resolve any issues you may encounter.

9. Maintain a professional demeanor

When installing the Delta faucet, maintain a professional demeanor and wear appropriate clothing. Take your time, ensure accuracy, and follow all safety guidelines to ensure a successful installation.

10. Go the extra mile

To provide exceptional service and ensure customer satisfaction, go the extra mile by educating your client about the features and benefits of the Delta faucet. Offer guidance on maintenance and care to prolong its lifespan and enhance its performance.

How To Install Delta Shower Faucet

Installing a Delta shower faucet is a relatively simple task that can be completed in a few hours. With the right tools and a little bit of patience, you can have your new faucet up and running in no time.

Here are the steps on how to install a Delta shower faucet:

Gather your tools and materials. You will need the following:
- Phillips head screwdriver
- Adjustable wrench
- Pliers
- Teflon tape
- New Delta shower faucet
Turn off the water supply to the shower. This is usually done by turning off the main water valve to your home.
Remove the old shower faucet. Use the adjustable wrench to loosen the nuts that hold the faucet in place. Once the nuts are loose, you can remove the faucet by hand.
Clean the surface where the new faucet will be installed. Use a damp cloth to clean the surface of the shower wall where the new faucet will be installed. This will help to ensure a good seal between the faucet and the wall.
Apply Teflon tape to the threads of the new faucet. This will help to prevent leaks.
Install the new faucet. Hand-tighten the nuts that hold the faucet in place. Once the nuts are tight, use the adjustable wrench to further tighten them.
Turn on the water supply to the shower. Check for leaks. If there are any leaks, tighten the nuts further.
Enjoy your new shower faucet!