Lace-up boots are a popular choice for both men and women, and for good reason. They’re stylish, comfortable, and can be dressed up or down. However, if you’ve never laced up a pair of boots before, it can be a bit tricky to get the hang of it. That’s why we’ve put together this step-by-step guide on how to lace a pair of Bean Boots. With a little practice, you’ll be lacing up your boots like a pro in no time.
First, you’ll need to decide which lacing method you want to use. There are several different methods, but the most common is the “criss-cross” method. To do this method, start by threading the lace through the bottom two eyelets on one side of the boot. Then, cross the laces over each other and thread them through the next two eyelets on the other side of the boot. Continue crossing the laces over each other and threading them through the remaining eyelets until you reach the top of the boot. Once you’ve reached the top, tie the laces together in a knot.
Another popular lacing method is the “straight bar” method. To do this method, start by threading the lace through the bottom two eyelets on one side of the boot. Then, thread the lace straight up through the next eyelet on the same side of the boot. Continue threading the lace straight up through the remaining eyelets until you reach the top of the boot. Once you’ve reached the top, tie the laces together in a knot. The straight bar method is a good choice if you want a more secure fit, as it creates a tighter lace.
Threading the Lower Laces
The first step in lacing your Bean Boot is to thread the lower laces. To do this, you’ll need to start with the two bottom holes on the inner side of the boot. Thread one of the laces through the first hole, then cross it over to the second hole and thread it through. Now, take the other lace. Thread it through the second hole, then cross it over to the first hole and thread it through. You should now have two laces coming out of the top of the boot.
Next, you’ll need to thread the laces through the next two holes up. Do this by crossing the right lace over the left lace and threading it through the first hole. Then, cross the left lace over the right lace and thread it through the second hole. Repeat this process for the next two holes up.
Once you’ve threaded the laces through the last two holes, you can tie them off in a bow. To do this, cross the right lace over the left lace and pull it through the loop. Then, cross the left lace over the right lace and pull it through the loop. Tighten the bow until the laces are snug, but not too tight.
Here’s a table that summarizes the steps for threading the lower laces:
| Step | Instructions |
|---|---|
| 1 | Thread one lace through the first hole on the inner side of the boot. |
| 2 | Cross the lace over to the second hole and thread it through. |
| 3 | Thread the other lace through the second hole. |
| 4 | Cross the lace over to the first hole and thread it through. |
| 5 | Thread the laces through the next two holes up, crossing the laces over each other as you go. |
| 6 | Tie the laces off in a bow. |
Crossing the Lower Laces
Once you’ve threaded the laces through the lower holes, it’s time to cross them. Cross the right lace over the left lace and pull it through the next hole on the left. Then, cross the left lace over the right lace and pull it through the next hole on the right. Continue this pattern all the way up the boot.
Here’s a more detailed breakdown of the steps:
Step 1: Thread the Right Lace
Take the right lace and thread it through the first hole on the right side of the boot. Pull it through until there’s about 6 inches of lace left.
Step 2: Cross the Right Lace
Cross the right lace over the left lace and pull it through the next hole on the left side of the boot. Pull it through until it’s snug.
Step 3: Thread the Left Lace
Take the left lace and thread it through the next hole on the right side of the boot. Pull it through until there’s about 6 inches of lace left.
Step 4: Cross the Left Lace
Cross the left lace over the right lace and pull it through the next hole on the left side of the boot. Pull it through until it’s snug.
Step 5: Repeat
Repeat steps 1-4 until you reach the last hole on the boot.
| Step | Action |
|---|---|
| 1 | Thread the right lace through the first hole on the right side of the boot. |
| 2 | Cross the right lace over the left lace and pull it through the next hole on the left side of the boot. |
| 3 | Thread the left lace through the next hole on the right side of the boot. |
| 4 | Cross the left lace over the right lace and pull it through the next hole on the left side of the boot. |
| 5 | Repeat steps 1-4 until you reach the last hole on the boot. |
Threading the Upper Laces
Once the lower laces are secured, it’s time to thread the upper laces. These laces will crisscross over the front of the boot, providing additional support and a snug fit.
Step 6: Crossing the Laces
This step is crucial for creating the distinctive “Bean Boot” lacing pattern. Follow these detailed instructions:
- Locate the bottom pair of eyelets on the opposite side of the tongue: These eyelets will be the starting point for the upper laces.
- Thread the left lace through the left eyelet: Pull the lace through until the ends are equal in length.
- Cross the left lace over the right lace: Bring the left lace over the right lace and towards the other side of the boot.
- Insert the left lace into the second eyelet on the right side: Thread the lace through the eyelet from top to bottom.
- Repeat steps 2-4 with the right lace: Start by threading the right lace through the right eyelet, then cross it over the left lace and insert it into the second eyelet on the left side.
- Continue crisscrossing the laces: Keep alternating the laces, crossing them over each other and threading them through the opposite eyelets.
- Work your way up the boot: As you continue crisscrossing the laces, gradually move towards the top of the boot.
- Secure the laces at the top: When you reach the top pair of eyelets, tie the laces together with a standard knot.
Finishing the Lace
Once you’ve laced your boots through the top loop, it’s time to finish off the lace. There are a few different ways to do this, but the most common is to tie a square knot.
**To tie a square knot:**
- Cross the left lace over the right lace.
- Bring the right lace under and through the loop formed by the left lace.
- Bring the right lace over the left lace and through the loop formed by the right lace.
- Pull both laces tight to cinch the knot.
Once you’ve tied the square knot, tuck the ends of the laces into the boot or around the ankle to keep them from getting in the way.
Other lacing methods
Here are a few other lacing methods that you may want to try:
| Lacing Method | Description |
|---|---|
| **Surgeon’s knot** | This knot is more secure than a square knot and is often used for climbing or other activities where the laces need to stay tight. |
| **Ian’s Knot** | This knot is also very secure and is easy to tie. It’s a good choice for boots that you’ll be wearing for long periods of time. |
| **Double bow** | This knot is a bit more complicated than a square knot, but it’s very secure and is less likely to come undone. |
Tying the Boot
10. Secure the Ankle
To secure the ankle, grab the bottom lace and pass it through the opposite eyelet. Pull the lace up and out to create a loop. Now, take the other lace and pass it through the loop. Pull it tight to secure the knot.
To tighten the ankle further, you can repeat step 10 with the remaining lace. This will create a double knot that will provide extra support and stability.
| Step | Description |
|---|---|
| 10.1 | Grab the bottom lace and pass it through the opposite eyelet. |
| 10.2 | Pull the lace up and out to create a loop. |
| 10.3 | Take the other lace and pass it through the loop. |
| 10.4 | Pull it tight to secure the knot. |
| 10.5 | Repeat steps 10.1-10.4 if desired to create a double knot. |
Once the ankle is secured, you can move on to the next step and continue lacing up the rest of the boot.
How To Lace A Bean Boot
Step 1: Prepare the laces. Unlace the boots completely and remove any existing laces. Cut two new laces to the desired length, typically 48-60 inches.
Step 2: Insert the laces. Thread the laces through the bottom two eyelets on each side of the boot, from the outside to the inside.
Step 3: Cross the laces over. Bring the left lace over the right lace and through the next eyelet on the right side. Then, bring the right lace over the left lace and through the next eyelet on the left side.
Step 4: Continue crossing. Repeat step 3 until you reach the top eyelets.
Step 5: Tie the laces. Pull the laces tight and tie them in a double knot.
Tips:
- For a more secure fit, double-lace the boots (i.e., cross the laces twice at each eyelet).
- Adjust the tension of the laces as needed to ensure a comfortable fit.
- Use a lace lock or lace keeper to prevent the laces from coming undone.
