Are you tired of your dull, boring Sharpies? Do you wish you could create your own custom Sharpies with unique designs and colors? If so, then you’re in luck! In this article, we will teach you how to make a G10 Sharpie. G10 is a durable and lightweight material that is perfect for making custom Sharpies. It is also resistant to water and chemicals, making it a great choice for outdoor use. So what are you waiting for? Let’s get started!
To make a G10 Sharpie, you will need the following materials:
- A G10 sheet
- A Sharpie ink cartridge
- A drill
- A saw
- Sandpaper
- A finishing compound
Once you have gathered your materials, you can begin making your G10 Sharpie. First, you will need to cut a piece of G10 to the desired size and shape. You can use a saw or a drill to do this. Once you have cut the G10, you will need to sand it smooth. You can use sandpaper or a finishing compound to do this.
Once the G10 is smooth, you will need to drill a hole in the center of the G10. This hole will be used to insert the Sharpie ink cartridge. Once you have drilled the hole, you can insert the ink cartridge into the hole. Finally, you can assemble the G10 Sharpie by screwing the cap onto the G10. Your G10 Sharpie is now complete! You can now use it to create your own custom designs and colors.
How To Make a G10 Sharpie
G10 is a composite material made of fiberglass and epoxy resin. It is known for its strength, durability, and resistance to chemicals and solvents. G10 is often used in the manufacture of knife handles, gun parts, and other products that require a high degree of strength and durability.
Making a G10 sharpie is a relatively simple process that can be done at home with a few basic tools and materials.
Materials:
* G10 sheet
* Sharpie pen
* Epoxy resin
* Hardener
* Mixing cups and sticks
* Sandpaper
* Polishing compound
Instructions:
1. Cut a piece of G10 to the desired size and shape of the sharpie.
2. Sand the edges of the G10 to smooth them out.
3. Apply a thin layer of epoxy resin to the G10.
4. Insert the Sharpie pen into the epoxy resin.
5. Mix the epoxy resin and hardener according to the manufacturer’s instructions.
6. Pour the epoxy resin mixture into the mold.
7. Allow the epoxy resin to cure for 24 hours.
8. Once the epoxy resin has cured, remove the sharpie from the mold.
9. Sand the sharpie to remove any rough edges.
10. Apply a polishing compound to the sharpie to give it a smooth, glossy finish.
People Also Ask About Making a G10 Sharpie
What is the best type of G10 to use?
The best type of G10 to use for a sharpie is one that is thick enough to provide strength and durability, but thin enough to be easily cut and shaped. A G10 sheet with a thickness of 1/8 inch is a good choice for making a sharpie.
What type of epoxy resin should I use?
Any type of epoxy resin can be used to make a G10 sharpie, but a two-part epoxy resin is the most commonly used. A two-part epoxy resin consists of a resin and a hardener. The resin and hardener are mixed together and then applied to the G10.
How long does it take for the epoxy resin to cure?
The epoxy resin will typically take 24 hours to cure. However, the curing time may vary depending on the temperature and humidity of the environment.
How do I sand the sharpie?
The sharpie can be sanded using a variety of sandpaper grits. Start with a coarse grit sandpaper to remove any rough edges. Then, gradually move to finer grit sandpaper to smooth out the surface of the sharpie.
How do I polish the sharpie?
The sharpie can be polished using a polishing compound. Apply a small amount of polishing compound to a cloth and then rub it over the surface of the sharpie. The polishing compound will help to give the sharpie a smooth, glossy finish.
