In case you are planning on buying a case to your iPad, you will need to know the proper dimension. The identical goes for those who simply need to know the mannequin of your iPad. There are just a few other ways to measure the scale of your iPad, relying on whether or not you may have the gadget available or not. On this article, we’ll offer you step-by-step directions on measure the scale of your iPad, whatever the mannequin.
When you’ve got your iPad available, the simplest approach to measure the scale is to make use of a ruler or measuring tape. Measure the size and width of the iPad, from edge to edge. The size is the measurement from the highest to the underside of the iPad, whereas the width is the measurement back and forth. Upon getting the size and width, you need to use the next desk to find out the scale of your iPad:
| Size (in) | Width (in) | Dimension |
|---|---|---|
| 9.7 | 7.0 | 9.7-inch iPad |
| 10.2 | 7.5 | 10.2-inch iPad (seventh and eighth era) |
| 10.5 | 7.9 | 10.5-inch iPad Professional |
| 11.0 | 8.1 | 11-inch iPad Professional (1st, 2nd, and third era) |
| 12.9 | 8.7 | 12.9-inch iPad Professional (1st, 2nd, third, 4th, and fifth era) |
Measuring the Bodily Dimensions
Earlier than discussing the technical dimensions of an iPad, it is important to grasp the bodily measurements. These dimensions straight impression the gadget’s portability, consolation of use, and compatibility with equipment. Here is an in depth information on measuring the bodily dimensions of an iPad.
1. Size and Width
To measure the size and width of the iPad, you will want a ruler or measuring tape. Place the ruler alongside the gadget’s longest facet, from one edge to the opposite. Document the measurement in inches or centimeters. Repeat the method for the width, which is the shorter facet perpendicular to the size. The size usually corresponds to the peak of the iPad when held in portrait mode, whereas the width corresponds to the width in portrait mode or the peak in panorama mode.
2. Peak
The peak of an iPad is measured by putting the gadget on a flat floor with the display dealing with up. Use a ruler or measuring tape to measure from the underside edge to the highest fringe of the gadget. This measurement is normally taken when the iPad is in portrait mode. The peak is essential for figuring out the gadget’s total dimension and for making certain compatibility with circumstances and docks.
3. Thickness
To measure the thickness, place the iPad on its facet and use a ruler or caliper to measure from the highest edge to the underside edge. This measurement is mostly taken on the thickest level of the gadget, which can range relying on the mannequin and design. The thickness can impression the gadget’s portability and luxury of holding it for prolonged durations.
Calculating the Display Dimension Diagonally
The commonest technique for measuring the scale of an iPad is to calculate the display dimension diagonally. That is completed by measuring the space from one nook of the display to the other nook. The result’s the diagonal size of the display, which is usually expressed in inches.
To calculate the display dimension diagonally, you will have a ruler or measuring tape. Place the ruler or measuring tape alongside the diagonal of the display, from one nook to the other nook. Ensure that the ruler or measuring tape is straight and that it’s not touching the bezel of the display.
Upon getting measured the diagonal size of the display, you need to use the next desk to find out the scale of your iPad:
| Diagonal Size (inches) | iPad Mannequin |
|---|---|
| 7.9 | iPad mini |
| 9.7 | iPad (2018) |
| 10.2 | iPad (2021) |
| 10.5 | iPad Air (2019) |
| 11 | iPad Professional (2018) |
| 12.9 | iPad Professional (2018) |
Figuring out the Side Ratio
To find out the facet ratio of an iPad, it’s essential to measure the display’s width and peak. The facet ratio is usually expressed as a ratio of the width to peak, equivalent to 4:3 or 16:9. Listed here are detailed steps on measure the iPad’s display dimensions:
-
Measure the Width
Use a ruler or measuring tape to measure the horizontal distance throughout the iPad display from the left edge to the appropriate edge. Document this measurement in millimeters (mm) or inches (in).
-
Measure the Peak
Subsequent, measure the vertical distance from the highest fringe of the iPad display to the underside edge. Document this measurement in mm or in.
-
Calculate the Side Ratio
Divide the width measurement by the peak measurement to acquire the facet ratio. For instance, if the width is 240 mm and the peak is 160 mm, then the facet ratio can be 240/160 = 3:2.
The next desk summarizes the facet ratios of various iPad fashions:
iPad Mannequin Side Ratio iPad (1st era) 4:3 iPad 2 4:3 iPad 3 4:3 iPad 4 4:3 iPad Air 4:3 iPad Air 2 4:3 iPad Professional (9.7-inch) 4:3 iPad Professional (10.5-inch) 4:3 iPad Professional (11-inch) 4:3 iPad Professional (12.9-inch) 4:3
Using On-line Instruments for Accuracy
There are quite a few on-line instruments that may present fast and correct measurements to your iPad. These instruments usually require you to enter the mannequin or dimensions of your gadget. Listed here are just a few fashionable choices:
| Instrument | Options |
|---|---|
| Apple Assist | Official measurements offered by Apple |
| Speccy | Detailed {hardware} data, together with gadget dimensions |
| iFixit Restore Guides | Detailed measurements and directions for gadget repairs |
To make use of these instruments, merely go to the web site and enter the mannequin or dimensions of your iPad. The device will then offer you the corresponding measurements.
Utilizing a Bodily Ruler or Measuring Tape
Should you desire a extra hands-on method, you need to use a bodily ruler or measuring tape to measure your iPad. To do that, place the ruler or tape alongside the sting of the gadget and skim the measurement. Be certain that you measure from the sting of the display to the sting of the gadget, together with any bezels or frames.
Contemplating the Side Ratio
When measuring the scale of your iPad, it is also essential to think about the facet ratio. This refers back to the ratio of the width to the peak of the display. For instance, an iPad with a 4:3 facet ratio can have a distinct display dimension than an iPad with a 16:9 facet ratio, even when they’ve the identical diagonal measurement.
Extra Suggestions for Correct Measurement
* Use a high-quality ruler or measuring tape for exact measurements.
* Measure from the middle of the display to keep away from any distortion.
* If potential, use a device that gives measurements in each inches and centimeters.
* Evaluate your measurements with the official Apple specs to make sure accuracy.
Assessing the Decision
The decision of an iPad, measured in pixels, refers back to the variety of particular person pixels displayed on its display. Increased resolutions lead to sharper and extra detailed pictures. To measure the decision of an iPad, observe these steps:
- Navigate to the “Settings” app in your iPad.
- Faucet on “Show & Brightness”.
- Scroll all the way down to the “Decision” part.
- The present decision of your iPad will probably be displayed right here.
- Faucet on “Extra Resolutions” to see a listing of different resolutions out there to your gadget.
- Measure the peak from the highest of the show to the underside.
- Measure the width from the left fringe of the show to the appropriate edge.
- Measure the thickness at its thickest level, normally alongside the facet the place the buttons are positioned.
- Millimeters to inches: To transform millimeters to inches, multiply the variety of millimeters by 0.0393701.
- Centimeters to inches: To transform centimeters to inches, multiply the variety of centimeters by 0.393701.
- Toes to inches: To transform ft to inches, multiply the variety of ft by 12.
- Obtain and set up the appliance from the App Retailer.
- Open the appliance and observe the directions on the display.
- Level the gadget’s digital camera at your iPad.
- Measure the size, width, and peak of your iPad utilizing the app’s instruments.
The out there resolutions for every iPad mannequin range relying on its display dimension and {hardware} capabilities. Some frequent resolutions for iPads embrace:
| iPad Mannequin | Decision |
|---|---|
| iPad (ninth era) | 10.2 inches, 2160 x 1620 pixels |
| iPad Air (fifth era) | 10.9 inches, 2360 x 1640 pixels |
| iPad Professional 12.9-inch (sixth era) | 12.9 inches, 2732 x 2048 pixels |
Checking the General Dimensions
To precisely measure the general dimensions of your iPad, seek advice from the official specs offered by Apple or seek advice from the consumer handbook that got here along with your gadget. The scale range relying on the particular iPad mannequin and era.
Here is a desk offering the general dimensions for the most recent generations of iPad fashions:
| Mannequin | Peak | Width | Thickness |
|---|---|---|---|
| iPad Professional 12.9-inch (fifth era) | 11.04 inches (280.6 mm) | 8.46 inches (214.9 mm) | 0.25 inches (6.36 mm) |
| iPad Professional 11-inch (third era) | 9.74 inches (247.6 mm) | 7.02 inches (178.5 mm) | 0.23 inches (5.9 mm) |
| iPad Air (fifth era) | 9.76 inches (247.6 mm) | 7.03 inches (178.5 mm) | 0.24 inches (6.1 mm) |
| iPad mini (sixth era) | 7.69 inches (195.4 mm) | 5.30 inches (134.8 mm) | 0.28 inches (7.2 mm) |
When measuring the size, preserve the next in thoughts:
Understanding Show Phrases
Show dimension: Measured diagonally from nook to nook, excluding any rounded edges or bezels (ie. the body across the display). Show dimension is usually expressed in inches.
Side ratio: The ratio of the show’s width to its peak. Frequent facet ratios embrace 4:3 (sq.), 16:9 (widescreen), and 16:10 (wider than widescreen).
Decision: The variety of pixels displayed on the display. Decision is usually expressed by way of the variety of pixels within the horizontal course by the variety of pixels within the vertical course (e.g., 1920×1080).
Pixel density: The variety of pixels per inch (PPI) of the show. Pixel density impacts the readability and sharpness of the picture, with greater pixel densities leading to sharper pictures.
Coloration depth: The variety of bits used to signify every pixel’s coloration. Coloration depth impacts the vary and accuracy of colours that may be displayed, with greater coloration depths leading to extra vibrant and correct colours.
Show sort: The kind of expertise used to show the picture, equivalent to LCD (liquid crystal show), OLED (natural light-emitting diode), or IPS (in-plane switching). Totally different show sorts supply totally different benefits and downsides by way of picture high quality, coloration accuracy, and viewing angles.
Retina show: A high-resolution show with a pixel density that’s excessive sufficient that the person pixels are usually not seen to the human eye at a typical viewing distance. Retina shows present sharp and clear pictures which might be simple on the eyes.
| Show Dimension (inches) | Side Ratio | Decision | Pixel Density (PPI) |
|---|---|---|---|
| 9.7 | 4:3 | 1024 x 768 | 264 |
| 10.2 | 4:3 | 1024 x 768 | 326 |
| 10.5 | 4:3 | 1668 x 2224 | 265 |
| 10.9 | 4:3 | 1668 x 2388 | 264 |
| 12.9 | 4:3 | 2048 x 2732 | 265 |
| 11 | 16:10 | 2388 x 1668 | 265 |
| 12.4 | 16:10 | 2560 x 1600 | 265 |
Changing Models of Measurement
Should you’re extra comfy measuring with totally different models than inches or centimeters, you may simply convert your iPad’s dimensions utilizing the next desk:
| Unit | Conversion Issue to Inches |
|---|---|
| Millimeters (mm) | 0.0393701 |
| Centimeters (cm) | 0.393701 |
| Toes (ft) | 12 |
For instance, to transform the iPad Professional 12.9-inch mannequin’s peak of 11.04 inches to millimeters, you’ll multiply 11.04 by 25.4 (the variety of millimeters in an inch), which supplies you 280.44 millimeters.
Here is an in depth clarification of the conversions:
By following these directions, you may simply measure the scale of your iPad in any unit of measurement you like.
Utilizing Third-Occasion Functions
A number of third-party functions can be found that may allow you to measure the scale of your iPad. One fashionable choice is the Measure app, which is offered without spending a dime on the App Retailer. This app means that you can measure the size, width, and peak of your iPad utilizing the gadget’s digital camera. An alternative choice is the Ruler app, which can also be out there without spending a dime on the App Retailer. This app offers a wide range of measuring instruments, together with a ruler, a protractor, and a tape measure. To make use of a third-party utility to measure the scale of your iPad:
The next desk summarizes the important thing options of the 2 hottest third-party functions for measuring the scale of an iPad:
| Characteristic | Measure | Ruler |
|---|---|---|
| Value | Free | Free |
| Instruments | Ruler, protractor, tape measure | Ruler, protractor, tape measure |
| Digicam | Sure | Sure |
| Accuracy | Excessive | Excessive |
Evaluating to Different Gadget Sizes
When evaluating the scale of an iPad to different gadgets, it is useful to think about the size of frequent sizes. Here is a desk exhibiting the size of varied iPad sizes and their comparability to different gadgets:
| Gadget | Show Dimension (inches) | Dimensions (inches) |
|---|---|---|
| iPad mini (sixth era) | 8.3 | 7.9 x 5.3 x 0.24 |
| iPad (ninth era) | 10.2 | 9.8 x 6.8 x 0.29 |
| iPad Air (fifth era) | 10.9 | 9.7 x 7 x 0.24 |
| iPad Professional 11-inch (4th era) | 11.0 | 9.7 x 7 x 0.23 |
| iPad Professional 12.9-inch (sixth era) | 12.9 | 11 x 8.5 x 0.25 |
| iPhone 14 Professional | 6.1 | 5.8 x 2.8 x 0.31 |
| Samsung Galaxy S23+ | 6.6 | 6.2 x 3 x 0.31 |
| MacBook Air (M2) | 13.6 | 11.97 x 8.36 x 0.44 |
| MacBook Professional 14-inch (M2) | 14.2 | 12.31 x 8.91 x 0.61 |
As you may see, iPads are available in a spread of sizes, from the compact iPad mini to the bigger iPad Professional. When selecting the best dimension to your wants, think about what actions you will be utilizing the gadget for. Should you’re primarily utilizing it for studying, shopping the net, or watching movies, a smaller iPad could also be adequate. Nonetheless, for those who’re planning on utilizing it for extra intensive duties like gaming or video modifying, a bigger iPad with the next decision show could also be a better option.
The way to Measure Dimension of iPad
To measure the scale of an iPad, it is advisable to decide the diagonal display dimension. This measurement is usually given in inches and represents the space from one nook of the display to the other nook diagonally.
To measure the diagonal display dimension, you need to use a ruler or tape measure. Place the ruler or tape measure alongside the diagonal of the display, making certain that it runs from one nook to the other nook. The measurement you get hold of would be the diagonal display dimension of the iPad.
For instance, for those who measure the diagonal display dimension of an iPad and procure a measurement of 9.7 inches, then the iPad has a 9.7-inch display.
Folks Additionally Ask
The way to measure iPad peak and width?
To measure the peak and width of an iPad, you need to use the next steps:
1. Place the iPad on a flat floor.
2. Use a ruler or measuring tape to measure the space from the highest fringe of the iPad to the underside edge. This gives you the peak of the iPad.
3. Subsequent, measure the space from the left fringe of the iPad to the appropriate edge. This gives you the width of the iPad.
