Unclogging a bathtub drain is a common plumbing problem that can be easily fixed with a few simple tools and techniques. However, if the clog is severe or located deep within the drain, you may need to call a plumber to snake or hydro-jet the drain.
Before you start, gather a few tools and materials: a pair of rubber gloves, a flashlight, a small bucket, a drain snake, and a chemical drain cleaner (optional). If you have a pop-up drain, you will also need a pair of pliers or a screwdriver to remove the stopper.
To begin, put on your rubber gloves and shine a flashlight down the drain to see if you can see the clog. If you can see the clog, you may be able to remove it with a drain snake. Insert the drain snake into the drain and turn the handle clockwise to extend the snake into the drain. Once the snake reaches the clog, push and pull the snake to break up the clog. If the clog is not visible, you can try using a chemical drain cleaner. Pour the drain cleaner down the drain and let it sit for the amount of time specified on the bottle. After the drain cleaner has had time to work, flush the drain with hot water.
How To Put A Drain In A Bathtub
Installing a bathtub drain is a relatively simple plumbing project that can be completed in a few hours. Here are the steps on how to do it:
1.
Remove the old drain. Using a screwdriver or wrench, remove the screws or bolts that hold the drain in place. Then, carefully pull the drain out of the bathtub.
2.
Clean the drain hole. Use a rag or sponge to clean the drain hole of any debris. Make sure that the hole is free of any rust or corrosion.
3.
Apply a bead of plumber’s putty to the new drain. Apply a thin bead of plumber’s putty to the bottom of the new drain. This will help to create a watertight seal.
4.
Insert the new drain into the hole. Carefully insert the new drain into the hole. Make sure that the drain is level and that the plumber’s putty is evenly distributed around the base of the drain.
5.
Tighten the screws or bolts. Tighten the screws or bolts that hold the drain in place. Do not overtighten the screws or bolts, as this could damage the bathtub.
6.
Test the drain. Turn on the water and check for any leaks. If there are any leaks, tighten the screws or bolts until the leak stops.
People Also Ask
How do you replace a bathtub drain flange?
To replace a bathtub drain flange, you will need to remove the old drain flange, clean the drain hole, and apply a bead of plumber’s putty to the new drain flange. Then, insert the new drain flange into the hole and tighten the screws or bolts that hold it in place.
How do you fix a leaking bathtub drain?
There are a few ways to fix a leaking bathtub drain. One way is to tighten the screws or bolts that hold the drain in place. Another way is to replace the drain washer. If the leak is coming from the drain flange, you will need to replace the drain flange.
How do you remove a bathtub drain stopper?
To remove a bathtub drain stopper, you will need to use a pair of pliers to gently pull the stopper out of the drain. If the stopper is stuck, you can try using a screwdriver to pry it out.
