Have you ever found yourself struggling to remove the PUR water filter from your pitcher? If so, you’re not alone. Many people find this task to be surprisingly difficult. However, with the right instructions, it can be done quickly and easily. In this article, we will provide you with a step-by-step guide on how to remove a PUR water filter from your pitcher. We will also include some tips and tricks to make the process even easier.
The first step is to locate the filter release button. This button is usually located on the bottom of the pitcher. Once you have found the button, press it and hold it down. While holding down the button, gently pull up on the filter. The filter should come out easily. If it does not, try wiggling it back and forth while pulling up. Once the filter is out, you can discard it and replace it with a new one.
Here are some tips and tricks to make the process even easier: If the filter is stuck, you can try using a pair of pliers to remove it. Be careful not to damage the filter or the pitcher. You can also try running hot water over the filter to loosen it up. If you are having trouble finding the filter release button, you can consult your pitcher’s user manual. With these tips and tricks, you should be able to remove a PUR water filter from your pitcher quickly and easily.
Locate the Filter Housing
Identifying the filter housing in your PUR water pitcher is crucial before initiating the filter removal process. Here’s how you can locate the housing:
1. Identify the Lid: The filter housing is located underneath the lid of the pitcher. Locate the lid, which is typically at the top of the pitcher, and unlatch or unscrew it to reveal the filter housing.
2. Examine the Base: In some PUR pitchers, the filter housing is integrated into the base. Check the bottom of the pitcher for a cylindrical or rectangular housing that extends below the water reservoir.
3. Check the Reservoir: The filter housing may be submerged within the water reservoir. Inspect the reservoir for a protruding or detachable part that contains the filter.
| Pitcher Type | Filter Housing Location |
|---|---|
| Traditional PUR Pitcher | Under the lid |
| PUR Advanced Water Filtration Pitcher | Within the base |
| PUR Ultimate Water Filtration Pitcher | Submerged in the reservoir |
Release the Filter Housing
To release the filter housing on your PUR pitcher, follow these steps:
1. Identify the Filter Housing Lock
Locate the small, circular lock on the top of the filter housing. It may have a notch or tab that you can grab.
2. Depress the Filter Housing Lock
Press down on the filter housing lock with your thumb or finger. This will disengage the lock.
3. Twist the Filter Housing Counterclockwise
While pressing down on the lock, twist the filter housing counterclockwise to release it from the pitcher. The filter housing should come off easily.
4. Remove the Used Filter
Once the filter housing is released, you can remove the old filter cartridge from the inside. Simply pull it straight up and discard it.
Grip and Remove the Filter
To remove the PUR water filter from the pitcher, follow these steps:
-
Locate the filter’s tab: On the bottom of the filter, you will find a small tab. This tab is used to grip and remove the filter.
-
Grip the tab: Use your thumb and index finger to grip the tab firmly.
-
Pull the filter straight up: While gripping the tab, pull the filter straight up and out of the pitcher. Avoid twisting or turning the filter as it may get stuck or break.
Here’s a detailed explanation of step 3:
- Firmly grasp the filter’s tab: Ensure you have a secure grip on the tab to prevent it from slipping.
- Use an upward force: Gently but firmly pull the filter upwards, maintaining a straight motion.
- Avoid twisting: Resist the urge to twist or turn the filter during removal. This can strain the filter’s connection points and potentially damage the filter or pitcher.
- Pull to the top: Continue pulling the filter upwards until it completely disengages from the pitcher.
Insert the New Filter
Now that your old filter is removed, it’s time to insert the new one. Take the new filter out of its packaging and inspect it for any damage. If there is any damage, do not use the filter. Instead, return it to the store or contact the manufacturer.
Once you have inspected the filter, hold it upside down and gently shake it to remove any loose particles.
5. Align the Filter With the Pitcher
The next step is to align the filter with the pitcher. To do this, hold the filter in one hand and the pitcher in the other. Insert the pointed end of the filter into the hole in the bottom of the pitcher. Make sure that the filter is aligned properly so that the water can flow through it. The filter will have some pushback when you start to insert it. You may need to apply some downward pressure to get it started. Once the pointed end of the filter is inserted, the rest of the filter should fall into place.
Lock the Filter Housing
The final step in removing a PUR water filter from a pitcher is to lock the filter housing securely in place. This step ensures that the water will flow through the new filter and not leak around it. Follow these steps to lock the filter housing:
1. Hold the filter housing upside down.
2. Insert the new filter into the filter housing, ensuring that it is properly seated.
3. Turn the filter housing clockwise about a quarter of a turn.
4. Stop turning when you feel resistance.
5. The filter housing is now locked in place.
Additional Tips:
- Do not overtighten the filter housing, as this can damage the filter or the pitcher.
- If you have difficulty locking the filter housing, try using a damp cloth or paper towel to grip it.
| Step | Action |
|---|---|
| 1 | Hold the filter housing upside down |
| 2 | Insert the new filter into the filter housing, ensuring that it is properly seated |
| 3 | Turn the filter housing clockwise about a quarter of a turn |
| 4 | Stop turning when you feel resistance |
| 5 | The filter housing is now locked in place |
Flush the Filter
8. **Flush the Filter (Optional):** Flushing the filter before inserting it into the pitcher ensures that any loose carbon particles are removed. To flush the filter:
| Step | Action |
|---|---|
| a | Remove the filter from its packaging. |
| b | Hold the filter upright in your hand. |
| c | Run cold water over the filter for 15 seconds. |
| d | Shake the filter gently to remove any excess water. |
| e | Insert the filter into the pitcher as instructed. |
Remove the Filter Indicator
After replacing the filter, you need to reset the filter indicator. To do this:
- Press and hold the “Filter Indicator” button for 5 seconds.
- The filter indicator will flash once, then turn off.
- The filter indicator is now reset.
Reset the Filter Indicator
The filter indicator light will turn red when it’s time to replace the filter. To reset the filter indicator:
- Remove the old filter and insert a new one.
- Fill the pitcher with cold water.
- Press and hold the “Filter Indicator” button for 5 seconds.
- The filter indicator light will turn green.
- The filter indicator is now reset.
Detailed Steps for Resetting the Filter Indicator
- Locate the Filter Indicator Button: The button is usually located on the front of the pitcher, near the top.
- Press and Hold: Press and hold the “Filter Indicator” button for approximately 5 seconds.
- Release the Button: Once the filter indicator light flashes once and turns off, release the button.
- Check the Indicator: The filter indicator should now be reset and will turn green when a new filter is installed.
How To Remove PUR Water Filter From Pitcher
1. Gather Your Materials
You will need:
– A PUR water pitcher with a filter
– A large bowl or bucket
– A pair of pliers (optional)
2. Empty the Pitcher
Pour out any remaining water from the pitcher.
3. Remove the Lid
Push the button on the top of the pitcher to release the lid.
4. Locate the Filter Release Button
Find the small button located on the bottom of the pitcher, near the base of the filter.
5. Press the Filter Release Button
Press the button and hold it down.
6. Grasp the Filter
Reach into the pitcher and grasp the filter.
7. Pull the Filter Straight Up
Gently pull the filter straight up and out of the pitcher.
8. Rinse the Pitcher
Rinse the pitcher thoroughly with clean water.
9. Insert the New Filter
Insert the new filter into the pitcher.
10. Press the Filter Into Place
Press the filter down firmly until it clicks into place. Make sure the filter is seated properly and there are no gaps around the edges.
11. Replace the Lid
Put the lid back on the pitcher and press down until it clicks into place.
12. Fill the Pitcher with Water
Fill the pitcher with cold water and let it sit for 5 minutes.
13. Enjoy Clean Filtered Water
Your water is now filtered and ready to drink.
How To Remove PUR Water Filter From Pitcher
To remove a PUR water filter from a pitcher, follow these steps:
- Empty the pitcher’s water into a sink or other container.
- Flip the lid of the pitcher over ( it has to be upside down)
- Press on the filter’s lid and turn to unlock it.
- Pull the filter straight up and out of the pitcher.
- Discard the old filter according to your local regulations.
Note: Some PUR pitchers have a different filter design. If your pitcher has a small, round filter, you will need to remove the lid and then pull a small tab on top of the filter to release it.
People also ask about How To Remove PUR Water Filter From Pitcher
How often should I replace my PUR water filter?
It is recommended to replace your PUR water filter every 2 months or 100 gallons of water, whichever comes first.
How do I know when it’s time to replace my PUR water filter?
There are a few signs that it’s time to replace your PUR water filter, including:
- The water flow from the pitcher has slowed down.
- The water tastes or smells bad.
- The filter has turned brown or black.
What are the benefits of using a PUR water filter?
PUR water filters effectively remove a wide range of contaminants from tap water, including lead, chlorine, and bacteria. This can improve the taste, smell, and safety of your drinking water.
