Maintaining the optimal performance of your Ariens XD 52 snowblower requires regular maintenance, including the replacement of worn or damaged parts. The drive belt, which transmits power from the engine to the transmission, is a critical component that needs periodic replacement. By following these comprehensive instructions, you can confidently replace the drive belt on your Ariens XD 52 snowblower, ensuring its smooth operation during the snowy season.
Before embarking on the replacement process, gather the necessary tools: a 1/2-inch socket wrench, a 3/8-inch socket wrench, a flathead screwdriver, and a replacement drive belt. Additionally, ensure that your workspace is well-lit and provides ample room for maneuverability. To begin, disconnect the spark plug wire from the spark plug to prevent accidental starting of the engine. Next, tilt the snowblower to provide access to the underside and remove the belt guard by loosening the bolts that secure it using the 1/2-inch socket wrench.
With the belt guard removed, you will have clear visibility of the drive belt. Locate the tensioner pulley, which is responsible for maintaining the proper tension on the belt. Using the 3/8-inch socket wrench, loosen the nut that secures the tensioner pulley. Once loosened, you can manually move the tensioner pulley away from the drive belt, creating slack. Carefully remove the old drive belt from the pulleys and inspect it for any signs of wear or damage that may have caused its failure. With the old belt removed, align the new drive belt onto the pulleys and slowly release the tensioner pulley, allowing it to engage with the belt and maintain proper tension. Finally, reattach the belt guard, tighten the bolts using the 1/2-inch socket wrench, and reconnect the spark plug wire. Double-check all connections, ensuring they are secure, and your Ariens XD 52 snowblower is now ready for action, equipped with a new drive belt that will power it through the winter season.
How To Replace An Ariens XD 52 Drive Belt
The Ariens XD 52 is a powerful snow blower that is designed to clear large areas of snow quickly and efficiently. However, like any machine, the XD 52 can experience problems from time to time. One common problem is a broken drive belt. If the drive belt breaks, the XD 52 will not be able to move forward or backward.
Replacing the drive belt on an Ariens XD 52 is a relatively simple task that can be completed in about an hour. Here are the steps on how to do it:
1. Gather your tools and materials. You will need a new drive belt, a 1/2-inch wrench, a 9/16-inch socket wrench, and a pair of pliers.
2. Disconnect the spark plug wire. This is a safety precaution to prevent the engine from starting while you are working on it.
3. Remove the belt guard. The belt guard is located on the front of the XD 52. It is held in place by two bolts. Remove the bolts and lift off the belt guard.
4. Remove the old drive belt. The old drive belt is located around the drive pulley and the transmission pulley. Use the pliers to remove the old belt from the pulleys.
5. Install the new drive belt. Place the new drive belt around the drive pulley and the transmission pulley. Make sure that the belt is routed correctly, according to the diagram in your XD 52 owner’s manual.
6. Tighten the belt tensioner. The belt tensioner is located on the side of the XD 52. Use the 1/2-inch wrench to tighten the tensioner until the belt is tight.
7. Reinstall the belt guard. Place the belt guard back on the XD 52 and secure it with the two bolts.
8. Reconnect the spark plug wire. Reconnect the spark plug wire to the spark plug.
9. Start the XD 52 and test the drive belt. Start the XD 52 and let it run for a few minutes. Check to make sure that the drive belt is working properly.
People Also Ask About How To Replace An Ariens XD 52 Drive Belt
How long does it take to replace an Ariens XD 52 drive belt?
It takes about an hour to replace an Ariens XD 52 drive belt.
How much does it cost to replace an Ariens XD 52 drive belt?
The cost to replace an Ariens XD 52 drive belt varies depending on the make and model of the belt. However, you can expect to pay between $20 and $50 for a new belt.
Can I replace the Ariens XD 52 drive belt myself?
Yes, you can replace the Ariens XD 52 drive belt yourself. However, if you are not comfortable working on small engines, you may want to have a qualified mechanic do the job for you.
How often should I replace the Ariens XD 52 drive belt?
The Ariens XD 52 drive belt should be replaced every 2 to 3 years, or more often if you use the snow blower frequently.
