Changing the battery in a First Alert smoke alarm is an easy activity that may assist guarantee the security of your property and household. When the battery is low, the alarm will emit a chirping sound. Changing the battery as quickly as attainable is crucial to make sure that the alarm will proceed to perform correctly within the occasion of a fireplace.
To switch the battery, you have to a brand new 9-volt battery. Upon getting the brand new battery, comply with these steps:
1. Take away the alarm from the ceiling or wall.
2. Use a screwdriver to take away the battery compartment cowl.
3. Disconnect the previous battery and join the brand new battery.
4. Exchange the battery compartment cowl.
5. Reinstall the alarm on the ceiling or wall.
Upon getting changed the battery, check the alarm to verify it’s working correctly. To do that, press the check button on the alarm. The alarm ought to sound a loud, piercing sound. If the alarm doesn’t sound, there could also be an issue with the alarm or the battery. On this case, you need to contact First Alert customer support for help.
Collect Important Instruments and Supplies
Making ready the mandatory instruments and supplies beforehand will guarantee a clean and environment friendly battery substitute course of on your First Alert smoke alarm. Here is a complete listing of what you will want:
Instruments:
- Phillips-head screwdriver: A #2 or #3 Phillips screwdriver is usually required to take away and substitute the alarm’s cowl or battery compartment.
- Needle-nose pliers (non-obligatory): Pliers could be useful for extracting the previous battery or reaching small, tight areas.
Supplies:
| Merchandise | Amount |
|---|---|
| 9-volt alkaline battery | 1 |
| Screws (in case your smoke alarm makes use of exterior screws) | 2 |
Observe: Examine the particular mannequin of your First Alert smoke alarm for any variations in instruments or supplies required.
Extra Issues:
- Battery Kind: All the time use a recent 9-volt alkaline battery for optimum efficiency. Keep away from utilizing heavy-duty or rechargeable batteries.
- Battery Orientation: Be certain that the brand new battery is inserted with the proper polarity (+ and -) as indicated within the battery compartment.
- Substitute Frequency: Observe the producer’s suggestions for the frequency of battery substitute, usually inside 6 to 12 months.
Establish Smoke Alarm Mannequin and Battery Kind
Figuring out your First Alert smoke alarm mannequin is essential to find out the proper battery kind. To do that:
- Find the smoke alarm unit.
- Take away the quilt or mounting bracket to show the unit’s again or base.
- The mannequin quantity will usually be printed on a label or stamped into the unit’s physique.
Upon getting the mannequin quantity, seek the advice of the desk under to search out the corresponding battery kind:
| Smoke Alarm Mannequin | Battery Kind |
|---|---|
| SA300 | 9-volt alkaline battery |
| SA500 | 12-volt lithium-ion battery |
| SA600 | 6-volt lithium-ion battery |
| SA700 | 9-volt lithium-ion battery |
Find the Battery Compartment
Figuring out the battery compartment of your First Alert smoke alarm is essential for changing its energy supply. To do that, comply with these steps:
- Take away the smoke alarm from the ceiling or wall: Gently twist the alarm counterclockwise till it detaches from its mounting base.
- Examine the alarm’s again panel: Search for a small, hinged door or panel that often has a diagram of the battery compartment.
- Open the battery compartment: Use a flat-head screwdriver or a coin to rigorously pry open the compartment door. Be cautious to not injury the hinge or the compartment itself.
| Battery Compartment Location | Description |
|---|---|
| Again of the alarm, coated by a hinged door | Commonest location for battery entry |
| Facet of the alarm, secured with a latch | Much less widespread, usually discovered on smaller or slimmer fashions |
| Contained in the alarm, accessible by way of a detachable cowl | Uncommon however discovered on some older fashions |
Disconnect the Alarm from the Ceiling
To disconnect the alarm from the ceiling, comply with these steps:
-
Find the discharge tab or button on the again of the alarm.
-
Press and maintain the discharge tab or button whereas gently pulling the alarm down from the ceiling.
-
If the alarm is hardwired, it’s possible you’ll have to disconnect the wires. To do that, use a screwdriver to loosen the screws holding the wires in place. Watch out to not contact any naked wires.
-
As soon as the alarm is disconnected from the ceiling, you possibly can proceed to exchange the battery.
Take away the Outdated Battery
To take away the previous battery, you have to to find the battery compartment. That is usually discovered on the again of the smoke alarm. Upon getting positioned the battery compartment, you have to to make use of a screwdriver to take away the screws that maintain it in place. As soon as the battery compartment is open, you have to to disconnect the previous battery. To do that, you have to to squeeze the terminals of the battery and pull it out. As soon as the previous battery is eliminated, you have to to eliminate it correctly. Please comply with all native rules relating to battery disposal.
1. Find the battery compartment.
The battery compartment is often positioned on the again of the smoke alarm. It might be coated by a small plastic door.
2. Take away the battery compartment cowl.
Use a screwdriver to take away the screws that maintain the battery compartment cowl in place. The quilt ought to then come off simply.
3. Disconnect the previous battery.
Find the terminals of the previous battery. They’re often positioned on the ends of the battery. Squeeze the terminals collectively and pull the battery out of the compartment.
4. Get rid of the previous battery.
Please comply with all native rules relating to battery disposal. Normally, you possibly can eliminate previous batteries at your native recycling heart.
5. Insert the brand new battery.
Find the terminals of the brand new battery. They’re often positioned on the ends of the battery. Align the terminals of the brand new battery with the terminals within the battery compartment. Push the brand new battery into the compartment till it clicks into place.
6. Exchange the battery compartment cowl.
Place the battery compartment cowl again on the smoke alarm. Safe it with the screws that you just eliminated earlier.
Set up the New Battery
1. Open the battery compartment by sliding the latch on the again of the alarm.
2. Take away the previous battery and eliminate it correctly.
3. Insert the brand new battery into the compartment, ensuring it’s oriented accurately (+/-).
4. Slide the battery compartment door again on, ensuring it latches securely.
5. Take a look at the alarm to verify it’s working correctly by urgent the check button.
6. For 9-volt batteries, comply with these extra steps:
For 9-Volt Batteries
| Single 9-Volt Battery | 2-9-Volt Batteries | |
|---|---|---|
| Battery Compartment | Backside of Alarm | Again of Alarm |
| Polarity | Constructive Terminal on High | Adverse Terminal on High |
| Battery-to-Battery Connection | Not Relevant | Constructive Terminal to Adverse Terminal |
Take a look at the Smoke Alarm
Most First Alert smoke alarms have a check button that initiates a brief burst of smoke simulation, activating the alarm. It’s best to check your smoke alarm often to make sure correct operation.
| Month-to-month Testing |
|---|
| Press and maintain the check button for 5-10 seconds. |
| Launch the button and pay attention for the alarm to sound. |
| If the alarm doesn’t sound, substitute the batteries instantly. |
Weekly Visible Inspection
Along with month-to-month testing, you need to visually examine your smoke alarm weekly to make sure there isn’t a seen injury, resembling cracks or holes within the housing, or proof of bugs or particles contained in the unit.
Annual Cleansing
Yearly, vacuum the smoke alarm to take away mud and particles that will have accrued inside. Use a tender brush attachment to softly clear the outside surfaces, together with the check button and any vents. Keep away from utilizing water or cleansing options on the smoke alarm.
Flip Off the Circuit Breaker
Earlier than you begin engaged on the smoke alarm, you will want to show off the circuit breaker that powers it. This can stop you from getting shocked.
Take away the Smoke Alarm from the Ceiling
As soon as the circuit breaker is off, you possibly can take away the smoke alarm from the ceiling. Most smoke alarms are held in place by a twist-and-lock mechanism. Merely twist the smoke alarm counterclockwise to take away it.
Disconnect the Wires
As soon as the smoke alarm is faraway from the ceiling, you will have to disconnect the wires which might be related to it. Most smoke alarms have two wires, a purple wire and a black wire. Merely use a screwdriver to loosen the screws that maintain the wires in place, after which pull the wires off of the terminals.
Take away the Outdated Battery
As soon as the wires are disconnected, you possibly can take away the previous battery from the smoke alarm. Most smoke alarms use a 9-volt battery. Merely squeeze the battery holder tabs collectively and slide the previous battery out.
Insert the New Battery
Take the brand new 9-volt battery and insert it into the battery holder. Ensure that the optimistic (+) terminal of the battery is going through the optimistic (+) terminal on the battery holder.
Reconnect the Wires
As soon as the brand new battery is inserted, you possibly can reconnect the wires to the smoke alarm. Merely push the wires onto the terminals and tighten the screws to carry them in place.
Exchange the Smoke Alarm on the Ceiling
As soon as the wires are reconnected, you possibly can substitute the smoke alarm on the ceiling. Merely twist the smoke alarm clockwise to lock it into place.
Reset the Alarm
|
As soon as the smoke alarm has been reinstalled, you will have to reset it. To reset the smoke alarm, press and maintain the check button for five seconds. |
|
The smoke alarm will beep as soon as to point that it has been reset. |
|
It’s best to now check the smoke alarm to make it possible for it’s working correctly. |
Reinstall the Alarm on the Ceiling
As soon as the brand new battery is put in, it is time to reinstall the alarm on the ceiling. Listed here are the detailed steps:
- Align the alarm’s mounting bracket with the holes on the ceiling.
- Press the alarm firmly in opposition to the ceiling till it snaps into place.
- Safe the screws that maintain the mounting bracket to the ceiling.
- Be certain the alarm is stage and safe.
- Press the check button to make sure the alarm is working correctly.
- If the alarm doesn’t sound, test the battery connection and substitute the battery if obligatory.
- Shut the battery compartment cowl and safe it with the screw.
- You’ll want to check the alarm month-to-month to make sure it’s functioning accurately.
- Exchange the battery yearly or as really useful by the producer.
Extra Ideas:
- Use the screws supplied with the alarm for the most effective match.
- If the ceiling is drywall, use plastic anchors to safe the screws.
- Think about using a step stool or ladder for simpler entry to the ceiling.
Doc the Battery Substitute
Documenting the battery substitute is essential for a number of causes:
– It gives a report of when the battery was changed, which could be useful for troubleshooting if the alarm malfunctions.
– It may aid you maintain monitor of the age of the battery, so you recognize when it must be changed once more.
– It may be useful if you have to file a guaranty declare for the alarm.
10. Doc the Battery Substitute
Upon getting changed the battery, it is very important doc the substitute. You are able to do this by writing down the date, time, and sort of battery that you just put in. You can even take an image of the alarm with the brand new battery put in. Maintain this data in a secure place so to consult with it later if wanted.
| Date and Time | Kind of Battery | Image |
|---|---|---|
| [Date] | [Type of Battery] | [Image] |
The best way to Exchange Battery on First Alert Smoke Alarm
Changing the battery on a First Alert smoke alarm is an easy activity that may be accomplished in only a few minutes. Observe these steps to make sure your smoke alarm is all the time working correctly and defending your property and household.
1. Take away the smoke alarm from its mounting bracket by twisting it clockwise.
2. Find the battery compartment on the again of the smoke alarm.
3. Use a small screwdriver or coin to open the battery compartment.
4. Take away the previous battery and insert a brand new 9-volt battery.
5. Shut the battery compartment and substitute the smoke alarm on its mounting bracket.
6. Take a look at the smoke alarm by urgent the check button.
Folks Additionally Ask
How typically ought to I substitute the battery in my First Alert smoke alarm?
It’s best to substitute the battery in your First Alert smoke alarm yearly, or extra typically if the alarm begins chirping intermittently. A low battery is likely one of the commonest causes for smoke alarms to fail, so it is essential to exchange the battery often.
The place can I discover a substitute battery for my First Alert smoke alarm?
Yow will discover substitute batteries for First Alert smoke alarms at most {hardware} shops, house enchancment shops, and on-line retailers. Be certain to pick a 9-volt battery that’s designed to be used with smoke alarms.
What ought to I do if my First Alert smoke alarm is chirping?
In case your First Alert smoke alarm is chirping, it’s seemingly that the battery is low. Exchange the battery instantly and check the smoke alarm to verify it’s working correctly. If the smoke alarm continues to chirp after changing the battery, there could also be an issue with the alarm and you need to contact First Alert for help.
