Featured Image: [Image of a Honda CR-V dashboard with the oil life indicator reset]
Introduction:
If you’re like most car owners, you probably don’t think about your oil life indicator until it’s time for an oil change. But what happens if you change your oil yourself and forget to reset the indicator? Don’t worry, it’s a quick and easy process that can be done in just a few minutes. Here’s a step-by-step guide on how to reset the oil life indicator in a 2006 Honda CR-V.
Step 1: Locate the Oil Life Indicator
The oil life indicator is located in the center of the dashboard, between the speedometer and tachometer. It’s a small, round gauge with a needle that moves from "0%" to "100%." When the needle reaches "0%", it’s time for an oil change.
Step 2: Turn the Ignition Key to the "On" Position
Do not start the engine. Simply turn the key to the "On" position, which will power up the dashboard without starting the engine.
Step 3: Press and Hold the Trip Reset Button
The trip reset button is located on the left side of the dashboard, next to the odometer. Press and hold the button for about 5 seconds. The oil life indicator will start to flash.
Step 4: Release the Trip Reset Button
Once the oil life indicator starts to flash, release the trip reset button. The needle will move back to "100%."
Step 5: Turn the Ignition Key to the "Off" Position
Turn the key to the "Off" position to save the new oil life setting.
Conclusion:
Resetting the oil life indicator in a 2006 Honda CR-V is a simple process that can be done in just a few minutes. By following the steps outlined in this guide, you can ensure that your oil life indicator is accurate and that you’re getting the most out of your oil changes.
Locating the Maintenance Minder Reset Button
Identifying the Maintenance Minder Reset Button on your 2006 Honda CR-V is crucial for resetting the oil change indicator. This button is typically located in an inconspicuous position within the vehicle’s dashboard or console, making it essential to follow specific steps to locate it accurately.
To begin, identify the instrument cluster, which houses the speedometer, tachometer, and other gauges. Depending on the trim level of your CR-V, the Maintenance Minder Reset Button may be situated in different locations:
| Location | Description |
|---|---|
| Left side of instrument cluster | Look for a small, recessed button near the odometer or fuel gauge. |
| Right side of instrument cluster | Search for a button located near the tachometer or engine temperature gauge. |
| Steering column | Check the left or right side of the steering column for a stalk or lever with a button labeled “Maintenance Minder.” |
| Center console | Some models have the button positioned near the gear selector or climate controls. |
Once you have located the Maintenance Minder Reset Button, you are ready to proceed with the next step of the reset procedure.
Accessing the Hidden Maintenance Menu
Step 1: Turn on the Ignition:
Insert the key into the ignition switch and turn it to the “On” position. Do not start the engine.
Step 2: Locate the Trip Button:
On the dashboard, locate the “Trip” button. It is usually situated near the speedometer.
Step 3: Press and Hold the Trip Button:
Press and hold the “Trip” button for approximately 10 seconds or until the maintenance minder appears.
Step 4: Navigate the Menu:
Using the “Select/Reset” button, navigate through the maintenance minder menu options to find the oil reset option.
Step 5: Select the Oil Reset Option:
Once you have found the oil reset option, press the “Select/Reset” button to initiate the reset process.
Step 6: Confirm the Reset:
The dashboard will display a confirmation message. Press the “Select/Reset” button again to confirm the reset.
Step 7: Turn Off the Ignition:
Once the oil reset is complete, turn off the ignition switch.
Selecting the Oil Life Reset Option
Now that the oil change is complete, it’s time to reset the oil life indicator system. This will notify your vehicle’s computer that the oil has been changed and reset the oil life counter. Here’s a detailed guide on how to do it:
- Insert the key into the ignition and turn it to the "ON" position, but do not start the engine.
- Locate the "SELECT/RESET" button on the instrument panel. It’s usually found near the speedometer or tachometer.
- Press and hold the "SELECT/RESET" button for approximately 10 seconds until "OIL LIFE RESET" appears on the display.
- Press the "SELECT/RESET" button again to reset the oil life indicator. The display will show "OIL LIFE 100%" or a similar message, indicating that the oil life counter has been reset.
- Turn the key to the "OFF" position to complete the process.
**Note:** The exact steps may vary slightly depending on the model year and trim level of your 2006 Honda CR-V. If you encounter any difficulties, please consult your owner’s manual for specific instructions.
Confirming the Reset
To verify whether the maintenance minder has been successfully reset, perform the following steps:
Step 1: Turn on the Ignition
Insert the key into the ignition and turn it to the “ON” position, but do not start the engine.
Step 2: Access the Maintenance Minder
Press and hold the “Select/Reset” button located on the dashboard for approximately 10 seconds.
Step 3: Check the Display
The maintenance minder display will appear on the dashboard. It should show the current oil life percentage or distance to next oil change.
Step 4: Verify the Reset
With the maintenance minder display visible, press the “Select/Reset” button again. If the reset was successful, the display will now show “100%” oil life or the appropriate distance to next oil change. Additionally, the maintenance light on the dashboard should be extinguished or turned off. If the reset was not successful, the maintenance minder display will show an error message or remain unchanged.
| Maintenance Light Indicator | Reset Status |
|---|---|
| Extinguished or Turned Off | Reset Successful |
| Illuminated or Remains On | Reset Unsuccessful |
Verifying the Reset Success
To confirm that the oil life reset was successful, follow these additional steps:
- Restart your vehicle’s engine and let it idle for a few minutes.
- Press and hold the “Trip” button until the “Maintenance Minder” message appears.
- Release the button and wait for the message to scroll through and display the next maintenance interval.
- Turn off the ignition and restart the engine.
- Press and release the “Trip” button again to display the oil life percentage. It should now read “100%.”
If the oil life percentage does not show 100%, repeat the reset procedure and check again. If it still does not reset, there may be an underlying issue that requires professional attention.
Here’s a table summarizing the verification steps:
| Step | Action |
|---|---|
| 1 | Restart the engine, idle for a few minutes. |
| 2 | Press and hold the “Trip” button until “Maintenance Minder” message appears. |
| 3 | Release the button, wait for the message to scroll and display the next maintenance interval. |
| 4 | Turn off and restart the engine. |
| 5 | Press and release the “Trip” button to display oil life percentage. It should be 100%. |
Turning Off the Ignition and Restarting the Vehicle
Once the oil reset procedure is complete, it’s time to turn off the ignition and restart the vehicle to reset the oil life monitor. Here are the detailed steps:
1. Ensure that the parking brake is engaged.
2. Turn the ignition key to the “OFF” position.
3. Wait for a few moments to allow the system to fully shut down.
4. Restart the vehicle by turning the ignition key to the “ON” position.
5. The oil life monitor should now be reset.
To verify that the reset has been successful, check the oil life monitor on the dashboard. It should now display 100% or 10,000 miles (depending on your vehicle’s model and configuration).
Resetting the Maintenance Indicator Light
1. Turn the ignition switch to the “ON” position. Do not start the engine.
2. Press and hold the “SEL/RESET” button until the maintenance indicator light starts flashing.
3. Release the “SEL/RESET” button. The maintenance indicator light will continue to flash.
4. Press and hold the “TRIP” button.
5. While holding the “TRIP” button, press the “SEL/RESET” button.
6. Release both buttons. The maintenance indicator light will turn off.
7. To verify that the maintenance indicator light has been reset, turn the ignition switch to the “OFF” position and then back to the “ON” position. The maintenance indicator light should not be illuminated.
| Step | Action |
|---|---|
| 1 | Turn ignition to “ON” (don’t start engine) |
| 2 | Hold “SEL/RESET” button until maintenance light flashes |
| 3 | Release “SEL/RESET” button (light continues flashing) |
| 4 | Hold “TRIP” button |
| 5 | While holding “TRIP,” press “SEL/RESET” button |
| 6 | Release both buttons (light turns off) |
| 7 | Verify light is off after cycling ignition switch |
Note: If the maintenance indicator light does not reset, there may be a problem with the vehicle’s electrical system. In this case, it is recommended to take the vehicle to a qualified mechanic for diagnosis and repair.
Resetting the Oil Life Indicator
Step 1: Turn the ignition switch to the “ON” position, but do not start the engine.
Step 2: Press and hold the “Trip” button on the dashboard for about 5 seconds.
Step 3: The “Oil Life” indicator will start flashing. Release the “Trip” button.
Step 4: Press the “Trip” button again to reset the indicator.
Alternative Methods for Oil Change Reset
Using the Scan Tool
Step 1: Connect a scan tool to the vehicle’s diagnostic port.
Step 2: Select the “PCM” module.
Step 3: Navigate to the “Oil Life Reset” function.
Step 4: Follow the on-screen instructions to reset the indicator.
Using the OBDII Port
Step 1: Locate the OBDII port under the dashboard.
Step 2: Connect an OBDII scanner to the port.
Step 3: Turn the ignition switch to the “ON” position, but do not start the engine.
Step 4: Enter the following command into the scanner: “AT DP 04 27 04”
Step 5: The scanner will display the current oil life percentage. Enter “100” to reset the indicator.
Resetting the Oil Life Indicator
1. Turn the ignition switch to the “ON” position without starting the engine.
2. Press and hold the “Select/Reset” button on the dashboard for about 10 seconds.
3. Release the button and the oil life indicator will display “0%”.
4. Start the engine and let it idle for a few minutes.
5. Turn off the engine and restart it. The oil life indicator should now display “100%”.
Troubleshooting Reset Issues
1. Make sure that the oil change was performed correctly.
2. Check that the engine oil is at the correct level.
3. If the oil life indicator still does not reset, there may be a problem with the oil life sensor.
4. The oil life sensor is located on the oil filter housing.
5. Disconnect the electrical connector from the oil life sensor.
6. Start the engine and let it idle for a few minutes.
7. Turn off the engine and reconnect the electrical connector to the oil life sensor.
8. Start the engine and check if the oil life indicator has reset.
If the oil life indicator still does not reset, the oil life sensor may need to be replaced.
The oil life sensor can be replaced by following these steps:
- Locate the oil life sensor on the oil filter housing.
- Disconnect the electrical connector from the oil life sensor.
- Use a wrench to loosen the oil life sensor.
- Remove the oil life sensor and replace it with a new one.
- Tighten the oil life sensor using a wrench.
- Reconnect the electrical connector to the oil life sensor.
- Start the engine and check if the oil life indicator has reset.
If the oil life indicator still does not reset, there may be a problem with the instrument cluster. The instrument cluster may need to be replaced by a qualified mechanic.
Importance of Regular Oil Changes
Maintaining a regular oil change schedule for your vehicle is essential for several reasons. Engine oil lubricates moving parts, reduces friction, and prevents wear and tear. It also helps to dissipate heat, remove contaminants, and protect against corrosion. Neglecting oil changes can lead to a range of problems, including:
- Increased engine wear and premature failure
- Reduced fuel efficiency
- Higher emissions
- Overheating and engine damage
- Voided manufacturer’s warranty
Oil Change Intervals
The recommended oil change intervals for your 2006 Honda CR-V are specified in your owner’s manual. However, it’s generally advisable to change your oil every 5,000 to 7,500 miles, or every six months, whichever comes first. If you drive in severe conditions, such as frequent stop-and-go traffic, heavy towing, or extreme temperatures, you may need to change your oil more frequently.
How to Reset Dash After Oil Change
- Insert the key into the ignition and turn it to the “ON” position, but do not start the engine.
- Press and hold the “ODO/TRIP” button on the dashboard.
- Turn the key to the “OFF” position.
- Release the “ODO/TRIP” button.
- Turn the key back to the “ON” position.
- The maintenance reminder will be reset.
- Press the “ODO/TRIP” button again to confirm the reset.
- Turn the key to the “OFF” position and remove the key.
Additional Notes
- If the maintenance reminder does not reset, repeat steps 1-7.
- If the maintenance reminder still does not reset, you may need to take your vehicle to a qualified mechanic.
- Some 2006 Honda CR-V models may have a different oil change reset procedure. Refer to your owner’s manual for specific instructions.
How To Reset Dash After Oil Change 2006 Honda Crv
To reset the maintenance minder on a 2006 Honda CR-V after an oil change, follow these steps:
- Insert the key into the ignition and turn it to the “ON” position, but do not start the engine.
- Locate the “TRIP” button on the dashboard and press and hold it until the mileage display resets to zero.
- Release the “TRIP” button and press the “SEL/RESET” button.
- The maintenance minder light will turn off and the new oil life percentage will be displayed.
People Also Ask About How To Reset Dash After Oil Change 2006 Honda Crv
How do I reset the oil life on my Honda CR-V?
To reset the oil life on your Honda CR-V, follow the steps outlined in the previous section.
What is the maintenance minder on a Honda CR-V?
The maintenance minder on a Honda CR-V is a system that tracks the vehicle’s maintenance needs and alerts the driver when it is time for service. The maintenance minder takes into account factors such as mileage, engine hours, and driving conditions to determine when specific maintenance tasks are needed.
How often should I change the oil in my Honda CR-V?
Honda recommends changing the oil in your CR-V every 5,000 to 7,500 miles, depending on your driving conditions.
