The Armitron Professional Sport Watch is a feature-packed timepiece that provides a variety of features, together with a stopwatch, countdown timer, and a number of alarms. Probably the most vital options of any watch is its skill to maintain correct time, and the Armitron Professional Sport Watch isn’t any exception. Setting the time on this watch is a straightforward course of that may be accomplished in just some steps.
First, find the 2 buttons on the precise aspect of the watch. The higher button is the “Mode” button, and the decrease button is the “Alter” button. To enter time-setting mode, press and maintain the “Mode” button for about three seconds. The show will present the present time, and the seconds digits will begin flashing. Use the “Alter” button to vary the seconds digits, then press the “Mode” button to maneuver to the minutes digits.
Repeat this course of to set the hours, month, and day. As soon as the time is about accurately, press and maintain the “Mode” button once more to exit time-setting mode. The time will now be displayed accurately on the watch face. The Armitron Professional Sport Watch is a flexible and sturdy watch that’s excellent for a wide range of actions. With its easy-to-use time-setting characteristic, you possibly can all the time make sure that you’re on time in your appointments and commitments.
Discovering the Time Setting Button
The Armitron Professional Sport Watch has a particular design with varied buttons situated round its casing. To establish the time setting button, look at the watch’s options carefully and observe these steps:
1. **Find the Buttons:** Examine the perimeters of the look ahead to small, raised buttons. The watch sometimes has two or three buttons, relying on the mannequin.
2. **Press and Launch:** Gently press every button a few times to look at its operate. The time setting button is normally labeled with an icon representing a clock or the letter “T.”
If there isn’t any seen label, seek advice from the watch’s person guide or on-line sources for particular button features.
3. **Decide the Time Setting Button:** After getting recognized the button that shows the time, press and maintain it for a number of seconds till the time begins flashing or a “SET” immediate seems on the show. This means that you’ve discovered the time setting button.
| Button Location | Button Perform |
|---|---|
| High Left | Time Setting Button |
| Backside Proper | Mode Button |
| Backside Left | Begin/Cease Button |
Getting into Set Mode
To enter set mode in your Armitron Professional Sport Watch, start by urgent and holding the decrease proper button. Proceed holding the button till the hour digits begin flashing on the show. This means that you’ve efficiently entered set mode.
Setting the Time
After getting entered set mode, use the higher proper and decrease proper buttons to regulate the hour and minute digits. The higher proper button increments the digits, whereas the decrease proper button decrements them. To toggle between adjusting the hours and minutes, press the decrease left button.
When the time is about accurately, press and maintain the higher proper button till the time begins flashing once more. This may point out that the time has been saved and you’ll exit set mode. To exit set mode, merely launch the button.
| Button | Perform |
|---|---|
| Higher proper | Increment digits |
| Decrease proper | Decrement digits |
| Decrease left | Toggle between hours and minutes |
Adjusting the Hour
To regulate the hour in your Armitron Professional Sport watch, observe these steps:
1. Pull out the crown to the primary place (one click on).
2. Flip the crown clockwise to maneuver the hour hand ahead or counterclockwise to maneuver it backward.
3. After getting reached the specified hour, fastidiously push the crown again into its authentic place and guarantee it’s absolutely seated to forestall water harm.
Observe:
For correct timekeeping, it is strongly recommended to regulate the watch by setting the hour hand first, then the minute hand, and at last the second hand (if relevant). This sequence helps to reduce any potential error in synchronization between the arms.
Here’s a desk summarizing the steps for adjusting the hour in your Armitron Professional Sport watch:
| Step | Motion |
|---|---|
| 1 | Pull out the crown to the primary place. |
| 2 | Flip the crown clockwise to maneuver the hour hand ahead or counterclockwise to maneuver it backward. |
| 3 | Push the crown again into its authentic place. |
Setting the Minutes
To set the minutes, press and maintain the “Mode” button for 3 seconds to enter the time-setting mode. The minutes will blink on the show. Use the “Begin/Cease” button to extend the minutes by one, or the “Cut up/Reset” button to lower the minutes by one.
After getting set the minutes, press the “Mode” button to substantiate your choice and exit the time-setting mode.
| Button | Perform |
|---|---|
| Mode | Enter/exit time-setting mode |
| Begin/Cease | Improve minutes by one |
| Cut up/Reset | Lower minutes by one |
Setting the Time
To set the time in your Armitron Professional Sport watch, observe these steps:
- Pull out the crown to the second click on.
- Flip the crown clockwise to set the hour hand.
- Flip the crown counterclockwise to set the minute hand.
- Press the crown again in to the primary click on.
- Flip the crown clockwise to set the seconds hand.
Confirming the Time
To verify the time, observe these steps:
- Pull out the crown to the primary click on.
- Flip the crown clockwise to set the hour hand.
- Flip the crown counterclockwise to set the minute hand.
- Press the crown again in.
- Observe the time.
If the time shouldn’t be right, repeat steps 1-4.
| Hour Hand | Minute Hand | Seconds Hand |
|---|---|---|
| Factors to the hour | Factors to the minute | Sweeps across the dial as soon as per second |
Observe: When setting the time, it is very important notice that the date will change robotically at midnight. Nevertheless, if you should manually change the date, pull out the crown to the primary click on and switch it counterclockwise.
Setting the Date
To set the date in your Armitron Professional Sport watch, observe these steps:
- Press and maintain the “Mode” button till the date show begins flashing.
- Use the “Ahead” and “Again” buttons to regulate the month.
- Press the “Mode” button to substantiate the month.
- Use the “Ahead” and “Again” buttons to regulate the day.
- Press the “Mode” button to substantiate the day.
- Use the “Ahead” and “Again” buttons to regulate the yr.
- Press the “Mode” button to substantiate the yr.
- Press the “Begin/Cease” button to exit the date setting mode.
Further Notes
The date format may be set to both MM/DD/YY or DD/MM/YY.
To alter the date format, press and maintain the “Mode” button till the date show begins flashing. Then, press the “Ahead” button to toggle between the 2 codecs.
Troubleshooting
If you’re having hassle setting the date in your Armitron Professional Sport watch, strive the next:
- Guarantee that the watch is within the right timekeeping mode.
- Guarantee that the battery shouldn’t be low.
- Strive resetting the watch by urgent the “Reset” button.
Confirming the Date
1. Press and maintain the “Mode” button for about three seconds. This may take you to the “Date” mode.
2. Use the “+” and “-” buttons to regulate the yr.
3. Press the “Mode” button once more to maneuver to the “Month” mode.
4. Use the “+” and “-” buttons to regulate the month.
5. Press the “Mode” button once more to maneuver to the “Day” mode.
6. Use the “+” and “-” buttons to regulate the day.
7. After getting adjusted the date, press and maintain the “Mode” button for about three seconds to save lots of the modifications and exit the “Date” mode.
For Armitron Professional Sport watches with a digital show:
| Button | Perform |
|---|---|
| “Alter” | Press and maintain to enter the date and time setting mode.
Press to toggle between date and time settings. Press and maintain to exit the setting mode. |
| “Mode” | Press to cycle via the date and time settings (yr, month, day, hour, minute, second). |
| “+” | Press to extend the worth of the chosen setting. |
| “-“ | Press to lower the worth of the chosen setting. |
| Step | Motion |
|---|---|
| 1 | Press the “Mode” button till you attain the alarm setting mode. |
| 2 | Use the “+” and “-” buttons to set the hour for the alarm. |
| 3 | Press the “Mode” button to maneuver to the minute setting. |
| 4 | Use the “+” and “-” buttons to set the minute for the alarm. |
| 5 | Press the “Mode” button once more to save lots of the settings. |
| 6 | To show the alarm on or off, press the “Alarm On/Off” button. |
Confirming the Alarm
After getting set the alarm, press the “SET” button as soon as to substantiate. The show will flash, and the alarm icon will seem within the show. To verify the alarm settings, press the “SET” button once more. The show will cease flashing, and the alarm will probably be set.
9. Setting the Alarm Period
After setting the alarm time, you possibly can set the length of the alarm. The default alarm length is 10 minutes. To alter the length, press the “MODE” button twice to enter alarm mode. Then, press the “SET” button to pick out the “DURATION” possibility. Use the “+” and “-” buttons to regulate the alarm length. The length may be set between 1 and 60 minutes.
| Alarm Period | Hours:Minutes |
|---|---|
| 1 | 00:01 |
| 5 | 00:05 |
| 10 | 00:10 (default) |
| 30 | 00:30 |
| 60 | 01:00 |
Time Setting Process
1. Press and maintain Mode button for 3 seconds to entry the Time Setting mode.
2. Use the Begin/Cease and Cut up/Reset buttons to regulate the hour.
3. Press the Mode button to substantiate the hour setting and proceed to the minute setting.
4. Use the Begin/Cease and Cut up/Reset buttons to regulate the minutes.
5. Press the Mode button to substantiate the minute setting and proceed to the second setting.
6. Use the Begin/Cease and Cut up/Reset buttons to regulate the seconds.
7. Press the Mode button to substantiate the second setting and proceed to the date setting.
8. Use the Begin/Cease and Cut up/Reset buttons to regulate the month.
9. Press the Mode button to substantiate the month setting and proceed to the day setting.
10. Use the Begin/Cease and Cut up/Reset buttons to regulate the day.
Exiting Set Mode
1. Press the Mode button as soon as to exit the Set Mode and return to the Timekeeping mode.
2. To enter the Set Mode once more, press and maintain the Mode button for 3 seconds.
| Perform | Button |
|---|---|
| Alter Hour | Begin/Cease or Cut up/Reset |
| Verify Hour and Proceed to Minutes | Mode |
| Alter Minutes | Begin/Cease or Cut up/Reset |
| Verify Minutes and Proceed to Seconds | Mode |
| Alter Seconds | Begin/Cease or Cut up/Reset |
| Verify Seconds and Proceed to Date | Mode |
| Alter Month | Begin/Cease or Cut up/Reset |
| Verify Month and Proceed to Day | Mode |
| Alter Day | Begin/Cease or Cut up/Reset |
| Exit Set Mode | Mode |
How To Set Time On Armitron Professional Sport Watch
To set the time in your Armitron Professional Sport Watch, simply observe these easy steps:
- Pull out the crown. The crown is the small knob on the aspect of the watch. Pull it out to the primary click on.
- Flip the crown to set the hour. Flip the crown clockwise to maneuver the hour hand ahead, and counterclockwise to maneuver it backward.
- Push within the crown. After getting set the hour, push the crown again in to the primary click on.
- Flip the crown to set the minutes. Flip the crown clockwise to maneuver the minute hand ahead, and counterclockwise to maneuver it backward.
- Push within the crown. After getting set the minutes, push the crown again in all the best way.
Your watch is now set to the right time.
Folks Additionally Ask
How do I set the date on my Armitron Professional Sport Watch?
To set the date in your Armitron Professional Sport Watch, simply observe these easy steps:
- Pull out the crown. The crown is the small knob on the aspect of the watch. Pull it out to the second click on.
- Flip the crown to set the date. Flip the crown clockwise to maneuver the date ahead, and counterclockwise to maneuver it backward.
- Push within the crown. After getting set the date, push the crown again in all the best way.
Your watch is now set to the right date.
How do I set the alarm on my Armitron Professional Sport Watch?
To set the alarm in your Armitron Professional Sport Watch, simply observe these easy steps:
- Pull out the crown. The crown is the small knob on the aspect of the watch. Pull it out to the primary click on.
- Flip the crown to set the hour. Flip the crown clockwise to maneuver the hour hand ahead, and counterclockwise to maneuver it backward.
- Push within the crown. After getting set the hour, push the crown again in to the primary click on.
- Flip the crown to set the minutes. Flip the crown clockwise to maneuver the minute hand ahead, and counterclockwise to maneuver it backward.
- Push within the crown. After getting set the minutes, push the crown again in all the best way.
- Slide the alarm swap to the on place. The alarm swap is situated on the aspect of the watch. Slide it to the on place to activate the alarm.
Your alarm is now set. It’s going to sound on the time you set it.
