The Nest Thermostat is a well-liked good thermostat that may enable you to get monetary savings in your power payments. It is simple to put in and use, but when it’s essential take it off the wall for any cause, this is find out how to do it. First, you may want to show off the facility to the thermostat. You are able to do this by flipping the breaker that controls the facility to your HVAC system. As soon as the facility is off, you’ll be able to take away the faceplate of the thermostat by gently pulling it straight in direction of you.
As soon as the faceplate is off, you may see 4 screws that maintain the thermostat to the wall. Use a screwdriver to take away these screws, after which rigorously carry the thermostat off the wall. Watch out to not injury the wires which are related to the thermostat. If it’s essential disconnect the wires, merely unscrew the wire nuts that maintain them in place. As soon as the wires are disconnected, you’ll be able to take away the thermostat from the wall.
For those who’re having bother eradicating the thermostat from the wall, do not drive it. You could must name a professional electrician that can assist you. As soon as the thermostat is off the wall, you’ll be able to clear it or change it with a brand new one. To reinstall the thermostat, merely reverse the steps that you simply took to take away it. You’ll want to tighten the screws that maintain the thermostat to the wall, and switch the facility again on to your HVAC system.
Eradicating the Faceplate
Earlier than you start, energy down your thermostat by flipping the breaker or eradicating the batteries. It will stop any electrical shocks or injury to the gadget.
As soon as the facility is off, gently grasp the faceplate of the thermostat along with your fingers. There ought to be a small notch or indentation on one facet of the faceplate, normally close to the underside. Place your fingernail or a skinny object into this notch and thoroughly pry upwards.
As you pry upwards, the faceplate ought to come unfastened from the bottom. Proceed prying gently till the faceplate is totally indifferent from the thermostat. Watch out to not use extreme drive, as this might injury the faceplate or the thermostat itself.
As soon as the faceplate is eliminated, you’ll have entry to the thermostat’s wires and terminals. You’ll want to label every wire earlier than disconnecting it, so that you could reconnect every little thing appropriately afterward.
To take away the thermostat from the wall, merely unscrew the mounting screws which are positioned on both facet of the bottom. As soon as the screws are eliminated, the thermostat could be rigorously lifted off the wall.
| 1. Energy down the thermostat |
| 2. Find the notch or indentation on the faceplate |
| 3. Rigorously pry upwards along with your fingernail or a skinny object |
| 4. Proceed prying till the faceplate is totally indifferent |
Disconnecting the Wires
1. Flip off the facility to your Nest thermostat on the breaker. It will stop any electrical shock when you are working.
2. Rigorously take away the faceplate of your Nest thermostat. To do that, gently pry the faceplate off with a flat-head screwdriver or an identical instrument. Watch out to not injury the faceplate or the thermostat itself.
3. As soon as the faceplate is eliminated, you will note the wires which are related to your Nest thermostat. These wires are usually color-coded, with crimson wires indicating energy, inexperienced wires indicating floor, and yellow wires indicating warmth.
4. Use a small screwdriver to loosen the screws which are holding the wires in place. Watch out to not over-tighten the screws, as this might injury the wires.
5. As soon as the screws are unfastened, gently pull the wires out of the terminals. Watch out to not pull too exhausting, as this might injury the wires or the thermostat.
6. As soon as the entire wires are disconnected, you’ll be able to rigorously take away your Nest thermostat from the wall.
**Here’s a desk that summarizes the steps for disconnecting the wires out of your Nest thermostat:**
| Step | Motion |
|---|---|
| 1 | Flip off the facility to your Nest thermostat on the breaker. |
| 2 | Rigorously take away the faceplate of your Nest thermostat. |
| 3 | Find the wires which are related to your Nest thermostat. |
| 4 | Use a small screwdriver to loosen the screws which are holding the wires in place. |
| 5 | Gently pull the wires out of the terminals. |
| 6 | Rigorously take away your Nest thermostat from the wall. |
Detaching the Base Plate
As soon as the Nest thermostat has been absolutely indifferent from the wall, it’s essential proceed to separate its base plate from the sub-base by following these detailed steps.
Find the Launch Button
Step one is to establish the discharge button on the bottom plate. This button is often positioned on the underside or facet of the plate and could also be labeled with an emblem or the phrase “launch.” Discover this launch button and gently press on it.
Detach the Base Plate
As soon as the discharge button has been pressed, rigorously carry the bottom plate upwards, away from the sub-base. The bottom plate ought to come off simply with minimal drive. You’ll want to maintain onto each the bottom plate and the sub-base to forestall them from falling or getting broken.
Disconnect the Wires
After the bottom plate has been eliminated, you will note a number of wires related to the sub-base. These wires are usually color-coded and could also be labeled for straightforward identification. Earlier than disconnecting the wires, take an image of the wiring configuration for reference later when reconnecting the thermostat.
To disconnect the wires, gently pull them straight out of the corresponding terminals on the sub-base. Don’t pull on the wires themselves, however slightly on the plastic connectors on the finish of the wires.
| Shade | Perform |
|---|---|
| Crimson | Energy (24V) |
| Inexperienced | Fan |
| Yellow | Heating (stage 1) |
| White | Heating (stage 2) |
| Blue | Cooling (stage 1) |
| Orange | Cooling (stage 2) |
Figuring out the Sort of Wall Plate
Earlier than eradicating your Nest thermostat from the wall, it is essential to establish the kind of wall plate you have got. Completely different fashions of Nest thermostats might require totally different wall plates. Comply with these steps to find out the kind of wall plate you have got:
- Take away the faceplate: Gently pull the faceplate of your Nest thermostat away from the wall plate.
- Verify the again of the faceplate: Study the again of the faceplate for any markings or labels that point out the wall plate kind.
- Examine the wall plate: Search for bodily traits on the wall plate itself which will point out the kind, akin to the form, dimension, and variety of holes or slots.
- Confer with the Nest person handbook: For those who can not establish the wall plate kind by inspection, seek the advice of your Nest thermostat’s person handbook, which can present particular directions for various wall plate varieties.
- Flip off the facility to the thermostat. This may be completed by flipping the circuit breaker or eradicating the fuse that provides energy to the thermostat.
- Take away the faceplate of the thermostat. That is normally completed by gently pulling on the faceplate till it pops off.
- Unscrew the 2 screws that maintain the wall plate in place. These screws are usually positioned on the high and backside of the wall plate.
- Pull the wall plate straight off the wall. Watch out to not injury the wires which are related to the thermostat.
- Disconnect the wires from the thermostat. The wires are usually related to the thermostat utilizing screw terminals. To disconnect the wires, merely loosen the screws and pull the wires off the terminals. You’ll want to word which wire is related to which terminal so that you could reconnect them appropriately once you set up the brand new thermostat.
- Guarantee that the wires are securely related to the thermostat. If the wires aren’t related correctly, the thermostat is not going to work correctly.
- Use a wire nut to attach the wires collectively. It will assist to forestall the wires from coming unfastened.
- Take a look at the thermostat to make it possible for it’s working correctly. To do that, activate the thermostat and set the temperature. The thermostat ought to activate the heating or cooling system to achieve the specified temperature.
- Gently pull the faceplate straight towards you to detach it from the bottom.
- Align the brand new faceplate with the bottom and gently snap it into place.
- Be sure that the faceplate is securely hooked up and sits flush towards the bottom.
- Deal with the faceplate with care to keep away from damaging the sensors or show.
- If the faceplate is caught or tough to take away, apply light stress and wiggle it barely to loosen it.
- Be certain the brand new faceplate is the proper dimension and coloration in your Nest thermostat mannequin.
- As soon as the faceplate is changed, verify if the thermostat is functioning correctly by adjusting the temperature and observing the show.
- For those who expertise any points with changing the faceplate, consult with the Nest assist web site or contact Nest buyer assist for help.
- Flip off the facility to the thermostat on the breaker or fuse field.
- Take away the faceplate of the thermostat by gently pulling it straight in direction of you.
- Find the 2 screws which are holding the thermostat to the wall plate. Take away these screws.
- Gently pull the thermostat straight off the wall plate.
- Press the ring on the entrance of the thermostat to wake it up.
- Swipe down from the highest of the display and faucet on the Settings icon.
- Scroll down and faucet on Reset.
- Faucet on Manufacturing unit reset.
- Enter your thermostat’s PIN.
- Faucet on Reset.
- Flip off the facility to the thermostat on the breaker or fuse field.
- Take away the faceplate of the thermostat by gently pulling it straight in direction of you.
- Find the 2 AA batteries which are positioned on the again of the thermostat. Take away the batteries by gently pulling them out.
- Insert two new AA batteries into the thermostat, ensuring that the constructive and unfavourable terminals are aligned appropriately.
- Reattach the faceplate to the thermostat.
- Flip the facility again on on the breaker or fuse field.
Most Nest thermostats are suitable with a number of kinds of wall plates, together with the next:
| Wall Plate Sort | Appropriate Nest Thermostats |
|---|---|
| Spherical Wall Plate | Nest Studying Thermostat, Nest Thermostat E, Nest Thermostat |
| Sq. Wall Plate | Nest Thermostat E, Nest Thermostat |
Eradicating the Previous Wall Plate
To take away the previous wall plate, comply with these steps:
| Wire Shade | Terminal |
|---|---|
| Crimson | R |
| White | W |
| Inexperienced | G |
| Yellow | Y |
Putting in the New Wall Plate
As soon as the previous wall plate is eliminated, it is time to set up the brand new one. This is a step-by-step information:
1. Take away the previous wires from the terminal screws.
Utilizing a screwdriver, gently unscrew the terminal screws and take away the wires from them. Observe the place of every wire so you’ll be able to reconnect them correctly later.
2. Join the wires to the brand new wall plate.
Match the wires to the corresponding terminals on the brand new wall plate and insert them into the screw terminals. Tighten the screws to safe the wires.
The terminals are normally color-coded to make it simpler to establish the place every wire goes. This is a standard color-coding scheme:
| Shade | Wire |
|---|---|
| Crimson | Energy (R) |
| White | Frequent (C) |
| Yellow | Warmth (W) |
| Blue | Cool (Y) |
| Brown | Fan (G) |
3. Mount the brand new wall plate to the wall.
Align the brand new wall plate over the mounting bracket and press it firmly into place. Be sure that it snaps securely into place.
4. Screw within the mounting screws.
Use the supplied screws to safe the wall plate to the mounting bracket. Tighten the screws till they’re comfortable however keep away from overtightening.
5. Join the thermostat to the wall plate.
Align the thermostat with the wall plate and press it firmly into place. The thermostat ought to snap securely onto the wall plate.
6. Take a look at the thermostat.
Activate the facility and verify if the thermostat is functioning correctly. Regulate the temperature and fan settings to ensure it responds as anticipated. If there are any points, recheck the wiring and connections till you resolve them.
Step 1: Unmount the Thermostat
Gently pull the thermostat away from the bottom plate. It ought to come off simply, but when it does not, use a flathead screwdriver to rigorously pry it unfastened.
Step 2: Take away the Wires
As soon as the thermostat is indifferent, you may see a number of wires hooked up to the bottom plate. Observe the place of every wire and thoroughly disconnect them.
Step 3: Unscrew the Base Plate
Find the 2 screws that maintain the bottom plate in place. Use a screwdriver to unscrew them.
Step 4: Pull the Base Plate Away
As soon as the screws are eliminated, rigorously pull the bottom plate away from the wall. It could be hooked up with adhesive, so use a delicate prying movement if essential.
Step 5: Reattach the Wires
Reconnect the wires to the bottom plate, guaranteeing that they’re securely mounted.
Step 6: Mount the Base Plate
Place the bottom plate again towards the wall and screw it into place. Be certain it’s stage and firmly hooked up.
Step 7: Reattach the Thermostat
Slide the thermostat again onto the bottom plate till it clicks into place. The thermostat ought to now be securely mounted on the wall.
Reattaching the Base Plate
To reattach the bottom plate, comply with these steps:
| Step | Motion |
|---|---|
| 1 | Take away the 2 screws that maintain the bottom plate in place. |
| 2 | Rigorously pull the bottom plate away from the wall. |
| 3 | Reconnect the wires to the bottom plate. |
| 4 | Place the bottom plate again towards the wall and screw it into place. |
As soon as the bottom plate is reattached, you’ll be able to slide the thermostat again onto it till it clicks into place.
Reconnecting the Wires
Earlier than you take away the thermostat from the wall, it’s essential disconnect the wires which are related to it. To do that, use a small screwdriver to loosen the screws that maintain the wires in place. As soon as the screws are unfastened, you’ll be able to pull the wires out of the thermostat.
Watch out to not lose monitor of which wire goes the place. You need to use a bit of tape to label every wire earlier than you disconnect it.
After getting disconnected the entire wires, you’ll be able to take away the thermostat from the wall. To do that, merely pull the thermostat straight off of the wall plate.
Listed below are some extra suggestions for reconnecting the wires to the thermostat:
| Wire Shade | Terminal |
|---|---|
| Crimson | R |
| White | W |
| Inexperienced | G |
| Yellow | Y |
| Blue | C |
| Orange | O/B |
Changing the Faceplate
The Nest thermostat faceplate is magnetically hooked up to the bottom, making it simple to take away and change. To exchange the faceplate, comply with these steps:
Further Notes for Changing the Faceplate:
| Instrument Required |
|---|
| None |
Please word that the steps for changing the Nest thermostat faceplate might range barely relying in your particular mannequin. Confer with the person handbook or on-line documentation in your explicit gadget for detailed directions.
Flip Off Energy on the Circuit Breaker
Step one is to show off the facility to the thermostat on the circuit breaker. It will stop any electrical shock hazard when you are engaged on the thermostat.
Take away the Faceplate
The faceplate is the entrance cowl of the thermostat that shows the temperature and different settings. To take away the faceplate, gently pull it straight in direction of you. It ought to come off simply.
Disconnect the Wires
As soon as the faceplate is eliminated, you will note the wires which are related to the thermostat. These wires are usually color-coded, but when they aren’t, remember to label them so that you could reconnect them appropriately afterward.
Take away the Mounting Plate
The mounting plate is the metallic plate that’s hooked up to the wall and holds the thermostat in place. To take away the mounting plate, unscrew the screws which are holding it in place.
Pull the Thermostat Straight Down
As soon as the mounting plate is eliminated, you’ll be able to pull the thermostat straight right down to take away it from the wall.
Troubleshooting Frequent Points
The thermostat just isn’t responding
If the thermostat just isn’t responding, verify to make it possible for the facility is turned on on the circuit breaker. If the facility is on, strive resetting the thermostat by urgent the reset button. If the thermostat nonetheless doesn’t reply, it could have to be changed.
The thermostat is displaying an error message
If the thermostat is displaying an error message, verify the person handbook to see what the error message means. The error message might present directions on find out how to repair the issue.
The thermostat just isn’t heating or cooling correctly
If the thermostat just isn’t heating or cooling correctly, verify to make it possible for the thermostat is ready to the proper mode. The thermostat can also be in want of calibration. To calibrate the thermostat, comply with the directions within the person handbook.
The thermostat is making a noise
If the thermostat is making a noise, it could be on account of a unfastened wire or a defective element. Verify the wires to make it possible for they’re all related securely. If the wires are all related securely, the thermostat might have to be changed.
The thermostat just isn’t connecting to the Wi-Fi community
If the thermostat just isn’t connecting to the Wi-Fi community, verify to make it possible for the Wi-Fi community is working correctly. You may as well strive resetting the thermostat by urgent the reset button. If the thermostat nonetheless doesn’t hook up with the Wi-Fi community, it could have to be changed.
How To Take A Nest Thermostat Off The Wall
To take a Nest thermostat off the wall, you may must do the next:
As soon as the thermostat is off the wall, you’ll be able to disconnect the wires from the again of the thermostat. You’ll want to pay attention to which wire goes to which terminal, so that you could reconnect them appropriately once you reattach the thermostat.
To reattach the thermostat, merely reverse the steps above. You’ll want to tighten the screws that maintain the thermostat to the wall plate, and switch the facility again on on the breaker or fuse field.
