9 Simple Steps To Remove Ring Doorbell

by

Ring Doorbell Off

Ring doorbells are a great way to keep an eye on your home and deter burglars, but there may come a time when you need to remove it. Whether you’re moving, replacing it with a new model, or simply need to clean it, we’ll provide a comprehensive guide on how to take Ring doorbell off effortlessly.

Before you begin, it’s essential to gather the necessary tools and safety equipment. You’ll need a screwdriver, a pair of pliers (optional), and a step stool or ladder for reaching higher installations. Additionally, ensure you have safety glasses and gloves to protect yourself from potential hazards while working with electrical components.

Once you have your tools ready, locate the mounting bracket of the Ring doorbell. In most cases, it’ll be attached to the wall or door frame using screws or bolts. Use the screwdriver to unscrew these fasteners carefully, supporting the doorbell with one hand to prevent it from falling. Disconnect the electrical wires by gently pulling them apart. Make sure to cap off the exposed wires using electrical tape for safety. Finally, lift the Ring doorbell off the mounting bracket and store it in a secure location.

Removing the Faceplate

Before you can remove the doorbell from its mount, you need to remove the faceplate. Here’s how to do it:

  1. Locate the small screw at the bottom of the faceplate. Use a screwdriver to loosen the screw.

  2. Once the screw is loose, gently pull the faceplate away from the doorbell. Be careful not to pull too hard, as the wires connecting the faceplate to the doorbell are delicate.

  3. Once the faceplate is removed, you will see the two wires that connect it to the doorbell. Disconnect the wires by gently pulling them apart.

  4. Now that the faceplate is removed, you can move on to removing the doorbell from its mount.

  5. Warning: Before removing the faceplate, make sure to power down the doorbell at the breaker. Failure to do so could result in electrical shock.

  6. Tip: If you are having trouble removing the faceplate, you can try using a plastic spudger or a small flathead screwdriver to gently pry it off.

Tools You’ll Need:
Phillips head screwdriver
Plastic spudger or small flathead screwdriver (optional)

Disconnecting the Wires

Before disconnecting the wires, it’s important to ensure the Ring Doorbell is powered off and disconnected from the power source. Follow these steps to safely remove the doorbell:

Step 1: Remove the safety screw

Locate the single screw on the bottom of the Ring Doorbell. Use a Phillips head screwdriver to remove the screw.

Step 2: Gently pull the unit towards you

Once the screw is removed, gently grasp the bottom of the Ring Doorbell and pull it towards you. It should easily come off the mounting bracket.

Step 3: Disconnect the wires

The Ring Doorbell has two wires: red and black. To disconnect the wires, follow these steps:

Wire Color Steps
Red Gently press the tab on the connector and pull the wire straight out.

Black Repeat the process to disconnect the black wire.

Step 4: Reattach the safety screw

Once the wires are disconnected, reattach the safety screw to the bottom of the Ring Doorbell. This will secure the unit and prevent any accidental detachment.

Unscrewing the Mount

To unscrew the mount, you will need a Phillips #2 screwdriver. First, locate the two screws that are holding the mount in place. They are typically located on the bottom of the mount. Once you have found the screws, simply use the screwdriver to unscrew them. Be careful not to overtighten the screws, as this could damage the mount or the doorbell.

Once the screws are loose, you can carefully pull the mount away from the wall. The doorbell should now be free and you can remove it from the mount.

Here are some additional tips for unscrewing the mount:

  • If the screws are particularly tight, you may need to use a pair of pliers to loosen them.
  • Be careful not to drop the doorbell when you are removing it from the mount.
  • If you are having any trouble unscrewing the mount, you can contact Ring customer support for assistance.

Removing the Battery (if applicable)

Some Ring doorbells require a battery for operation, while others are powered by a wired connection. If your doorbell uses a battery, you will need to remove it before proceeding to the next steps.

  1. Locate the battery release button, which is usually located on the bottom or back of the doorbell.
  2. Press and hold the release button while sliding the battery out of its compartment.
  3. Dispose of the old battery properly and insert a new one into the compartment, ensuring proper polarity.
  4. Slide the battery back into place and release the release button.

Detaching the Speaker

Step 1: Remove the Security Screw

Locate the security screw on the bottom of the doorbell. Use a screwdriver to remove the screw and set it aside.

Step 2: Unclip the Speaker

Carefully lift the bottom of the speaker housing away from the base of the doorbell. There are spring-loaded clips holding it in place. Use a small screwdriver or pry tool to gently release the clips.

Step 3: Disconnect the Speaker Wire

Locate the speaker wire connected to the base of the doorbell. Gently pull the wire straight up to detach it. Avoid pulling on the wires themselves, as they can be fragile.

Step 4: Remove the Speaker Housing

Using the pry tool, carefully separate the speaker housing from the base of the doorbell. The housing may be slightly adhered, so apply gentle force.

Step 5: Unscrew the Speaker

Inside the housing, locate the two screws holding the speaker in place. Unscrew them and gently lift the speaker out.

Step 6: Disconnect the Speaker Cable (Wired Doorbells Only)

For wired doorbells, an additional step is required.

For Doorbells with a Quick Release Cable For Doorbells with a Screw Terminal Cable

Locate the speaker cable and squeeze the release tab to disconnect it.

Locate the screw terminal and loosen the screws to disconnect the cable.

Taking Apart the Housing

The Ring Doorbell housing consists of a front plate and a back plate. To disassemble the housing and access the doorbell’s internal components:

  1. Locate the release button on the front plate, which is typically on the side or bottom.
  2. Press and hold the release button while gently pulling the front plate towards you.
  3. Unclip the front plate from the rear plate.
  4. Once the front plate is removed, you’ll have access to the doorbell’s wires and mounting screws.
  5. Disconnect the doorbell wires by gently pulling them out of the terminals.
  6. Unscrew the mounting screws to detach the doorbell from the mounting bracket.
  7. Carefully lift the doorbell away from the mounting bracket.
Tool Description
Phillips screwdriver For removing the mounting screws
Torx screwdriver For removing the security screws (in some models)
Plastic opening tool For prying open the housing (optional)

Replacing the Battery or Wiring (if necessary)

It’s important to ensure that your Ring Doorbell has sufficient power to function properly. If the battery needs replacing or the wiring requires attention, follow these steps:

Checking Battery Life

To check the battery level, open the Ring app, tap the “Devices” tab and select your doorbell. The battery icon will indicate the current power status.

Replacing the Battery

To replace the battery, locate the two screws underneath the doorbell and remove them. Gently pull the doorbell off the mounting plate, expose the battery, and swap it with a new one. Reattach the doorbell to the plate and secure it with the screws.

Connecting to Power

If you prefer a wired connection, an electrician can assist with installing a transformer and connecting the doorbell to your home’s electrical system. This will provide continuous power without the need for battery replacements.

Wiring Specifications

Wire Color Purpose
Red Power
White or Black Neutral
Green Ground

Follow the instructions included with your doorbell for specific wiring details.

Reinstalling the Ring Doorbell

Once you have removed the Ring Doorbell from its mount, you can reinstall it by following these steps:

1. Insert the included mounting bracket into the back of the Ring Doorbell.

2. Place the Ring Doorbell on the mounting bracket and tighten the screws.

3. Decide where you want to mount the Ring Doorbell on the wall. Use the included screws to secure the mounting bracket to the wall.

4. Slide the Ring Doorbell onto the mounting bracket and tighten the screw.

5. Connect the wires to the terminals on the back of the Ring Doorbell. The red wire connects to the terminal labeled “R,” and the black wire connects to the terminal labeled “C.”

6. Insert the battery into the Ring Doorbell.

7. Test the Ring Doorbell to make sure it is working properly.

8. Download the Ring app on your smartphone and create an account.

9. Follow the instructions in the app to connect your Ring Doorbell to your Wi-Fi network, complete the setup process, and access live footage and other features.

Testing the Ring Doorbell

Before removing your Ring Doorbell, it’s essential to test it to ensure it’s functioning correctly. Here are the steps to follow:

1. Check the Power

Verify that the Ring Doorbell is receiving power by pressing the front button. If the light ring flashes and you hear a chime, the doorbell is powered.

2. Test the Connectivity

Open the Ring app on your smartphone. Select your Ring Doorbell from the list of devices. If the app connects and shows a live view from the doorbell’s camera, the connectivity is established.

3. Test the Motion Detection

Wave your hand in front of the doorbell or walk past it. If the doorbell detects the motion and sends a notification to your phone, the motion detection is working.

4. Test the Chime

If you have a Ring Chime connected to your doorbell, press the button on the front of the doorbell and listen for the chime at your chime device.

5. Test the Night Vision

At night, cover the doorbell’s lens with your hand and see if the night vision turns on. You will see a black and white image in the Ring app.

6. Test the Two-Way Talk

Press the microphone icon in the Ring app and speak into your phone’s microphone. You should hear your voice coming from the doorbell’s speaker.

7. Test the Live View

Open the Ring app and tap “Live View” to access a real-time video feed from the doorbell’s camera.

8. Test the Recording

If you have a Ring Protect subscription, trigger an event (e.g., motion detection) and check the Ring app for recorded footage.

9. Test the Alerts

Set up motion detection and chime alerts in the Ring app. Trigger an event and check if you receive notifications on your phone and email.

10. [Additional Testing for Wired Doorbells]

For wired doorbells:

Test Description
Remove power from the doorbell Turn off the circuit breaker or remove the fuse that powers the doorbell.
Disconnect the wires Carefully detach the wires from the terminals on the back of the doorbell.
Reconnect the wires Reconnect the wires to the correct terminals on the back of the doorbell.
Restore power to the doorbell Turn on the circuit breaker or replace the fuse to restore power.
Test the doorbell Press the front button on the doorbell and verify that it is functioning correctly.

How to Take Ring Doorbell Off

There are a few reasons why you may need to take your Ring doorbell off. Maybe you’re moving, or maybe you’re just having some trouble with it. Whatever the reason, here are the steps on how to take your Ring doorbell off:

  1. Turn off the power to your Ring doorbell at the breaker.
  2. Remove the two screws that are holding the faceplate on.
  3. Gently pull the faceplate off of the wall.
  4. Disconnect the wires from the back of the doorbell.
  5. Remove the doorbell from the wall.

Once you have removed your Ring doorbell, you can store it in a safe place until you need it again.

People Also Ask

How do I reset my Ring doorbell?

To reset your Ring doorbell, press and hold the orange button on the back of the device for 10 seconds. The doorbell will then reset and you will need to set it up again.

How do I change the battery in my Ring doorbell?

To change the battery in your Ring doorbell, remove the two screws that are holding the faceplate on. Then, gently pull the faceplate off of the wall. The battery is located on the back of the doorbell. Disconnect the wires from the battery and then remove the battery. Insert the new battery and reconnect the wires. Finally, put the faceplate back on and tighten the screws.

How do I troubleshoot my Ring doorbell?

If you are having trouble with your Ring doorbell, there are a few things you can try to troubleshoot the issue. First, check to make sure that the doorbell is properly connected to your Wi-Fi network. If the doorbell is not connected to Wi-Fi, it will not be able to function properly. You can also try restarting your doorbell by pressing and holding the orange button on the back of the device for 10 seconds. If the doorbell is still not working properly, you may need to contact Ring support for further assistance.