Changing the oil on your Kia 2022 Seltos is an important part of maintaining your vehicle. Regular oil changes help to keep your engine clean and running smoothly, and they can also help to prevent costly repairs in the future. Changing the oil on your Kia 2022 Seltos is a relatively simple process that can be completed in about an hour, even if you’re a beginner. Here’s a step-by-step guide on how to do it.
Before you start, you’ll need to gather a few supplies. You’ll need a new oil filter, a new drain plug washer, and 5 quarts of new oil. You’ll also need a few tools, including a wrench, a socket, and an oil filter wrench. Once you have your supplies, you’re ready to get started. First, you’ll need to locate the oil drain plug. The oil drain plug is located on the bottom of the oil pan, which is the large metal pan that holds the oil in your engine. Once you’ve found the oil drain plug, place a drain pan under it to catch the old oil.
Next, you’ll need to loosen the oil drain plug. Be careful not to drop the bolt into the drain pan. Once the oil drain plug is loose, allow the oil to drain out completely. This may take a few minutes. Once the oil has drained out, replace the oil drain plug and tighten it securely. Next, you’ll need to replace the oil filter. The oil filter is located on the top of the engine. Use the oil filter wrench to loosen the old oil filter and remove it. Apply a small amount of new oil to the gasket of the new oil filter and screw it on by hand until it’s tight. Finally, you’ll need to add new oil to your engine. Add 5 quarts of new oil to the engine and check the oil level. The oil level should be between the “min” and “max” marks on the dipstick.
Materials Needed for Oil Change
To ensure a smooth oil change, gather the following essential materials:
-
New oil filter: Select the appropriate oil filter compatible with your Kia 2022 Seltos. Consult your owner’s manual or check with your local auto store to determine the correct filter size and type.
-
Fresh engine oil: Purchase the recommended type and viscosity of engine oil for your vehicle. Refer to your owner’s manual for specific oil specifications.
-
Oil drain pan: Use a large, shallow pan with a capacity of at least 6 quarts to collect the used oil.
-
Funnel: A funnel helps to guide the fresh oil into the engine and prevent spills.
-
Wrench or socket set: You will need a wrench or socket set to loosen the oil drain plug and oil filter. The specific size and type of wrench or socket may vary depending on your Seltos model.
-
Gloves: Protect your hands from hot oil and dirt by wearing disposable gloves.
-
Rags or paper towels: Keep rags or paper towels on hand to wipe up any spills or excess oil.
-
Safety glasses: Wear safety glasses to protect your eyes from flying debris or oil droplets.
-
Oil filter wrench: If your Seltos has a cartridge-type oil filter, you will need an oil filter wrench to remove it.
| Item | Description |
|---|---|
| Oil Filter | Appropriate oil filter compatible with Kia 2022 Seltos |
| Engine Oil | Recommended type and viscosity of engine oil for your vehicle |
| Oil Drain Pan | Large, shallow pan with a capacity of at least 6 quarts to collect used oil |
| Funnel | To guide fresh oil into the engine and prevent spills |
| Wrench or Socket Set | To loosen oil drain plug and oil filter (specific size and type may vary) |
Safety Precautions to Follow
Before embarking on the oil change process, certain safety precautions must be observed to ensure a safe and efficient experience. These include:
1. Park the Vehicle on a Level Surface
Park the Seltos on a flat, stable surface to prevent any potential movement or rolling during the oil change.
2. Safety Gear
Protect yourself by wearing gloves, eye protection, and appropriate clothing. Hot oil can potentially cause burns, and eye protection guards against any splashes or debris. Additionally, wear clothing that covers your skin to minimize exposure to hot components or fluids.
3. Allow the Engine to Cool
Turn off the engine and allow it to cool for a minimum of 30 minutes before starting any work. This precaution reduces the risk of burns from hot engine components and allows the oil to settle in the oil pan, making it easier to drain.
4. Consult the Owner’s Manual
Refer to the Seltos owner’s manual for specific instructions and recommendations regarding the type of oil, oil filter, and torque specifications for your vehicle.
Locating the Oil Drain Plug and Filter
Finding the oil drain plug and filter on your Kia 2022 Seltos is crucial for successful oil changes. Follow these steps to locate them:
Oil Drain Plug
1. Locate the oil pan under the engine. It is a large, metal pan that holds the engine’s oil.
2. Look for a bolt or cap on the bottom of the oil pan. This is the oil drain plug.
Oil Filter
1. Locate the engine’s top. Look for a cylindrical device with a black cap. This is the oil filter housing.
2. Inside the housing, you will find the oil filter. It is a round, paper element that traps impurities in the oil.
The table below provides additional guidance for locating the oil drain plug and filter:
| Component | Location |
|---|---|
| Oil Drain Plug | Bottom of oil pan |
| Oil Filter Housing | Top of engine |
| Oil Filter | Inside oil filter housing |
Draining the Old Oil
Before you start draining the oil, ensure the engine is warm, as this will make the oil flow more easily. Safety first: wear gloves, have an oil pan ready, and park your vehicle on a level surface to prevent spills.
Locate the oil drain plug, usually found at the bottom of the oil pan. Place the oil pan underneath the drain plug and carefully remove the plug using a wrench or socket. Allow the oil to drain completely into the oil pan. Depending on your vehicle, this may take several minutes.
Once the oil has completely drained, replace the drain plug. Tighten it securely but avoid overtightening. Reset the oil life reminder system (if equipped) by following your vehicle’s specific instructions.
Removing the Old Oil Filter
Locate and remove the old oil filter using an oil filter wrench or your hand if possible. Be careful not to spill any remaining oil when removing the filter. Clean the oil filter mounting surface on the engine with a clean rag.
Apply a thin layer of clean oil to the gasket of the new oil filter. Screw on the new oil filter by hand until it is snug, then use the oil filter wrench to tighten it further, but do not overtighten.
Refer to the table below for specific oil capacity and recommended oil type for your 2022 Kia Seltos:
| Engine Type | Oil Capacity | Recommended Oil Type |
|---|---|---|
| 1.6L Turbo GDI | 4.0 quarts | 5W-20 |
| 2.0L MPI | 4.3 quarts | 5W-20 |
Replacing the Oil Filter
Located near the bottom of the engine, the oil filter plays a crucial role in capturing harmful contaminants from the engine oil. Replacing the oil filter is essential to ensure the overall health and performance of your Kia Seltos. Here are the steps on how to replace the oil filter:
-
Gather materials: You will need a new oil filter, a new oil filter wrench, an oil drain pan, and a funnel.
-
Locate the oil filter: Look under the hood of your Kia Seltos for the oil filter. It is usually a cylindrical-shaped component located near the bottom of the engine.
-
Use the oil filter wrench: To loosen the oil filter, use an oil filter wrench. Twist the wrench counterclockwise to remove the filter.
-
Apply a thin layer of oil to the gasket: Before installing the new oil filter, apply a thin layer of clean engine oil to the gasket of the new filter.
-
Hand-tighten the oil filter: Screw the new oil filter onto the engine by hand, turning it clockwise. Avoid overtightening the filter.
-
Dispose of the old oil filter: Place the old oil filter in the oil drain pan and dispose of it properly.
Specifications for Kia Seltos 2022 Oil Filter
| Requirement | Specification |
|---|---|
| Oil filter type | Spin-on |
| Filter thread diameter | 76 mm (3 in) |
| Height | 105 mm (4.1 in) |
| Bypass valve setting | 8-12 psi (0.55-0.83 bar) |
| Anti-drainback valve | Yes |
Tightening the Oil Drain Plug
Once the old oil has drained, clean the oil drain plug and its mating surface on the oil pan. Apply a new washer to the plug and hand-tighten it into the pan. Use a torque wrench to tighten the drain plug to the manufacturer’s specifications. Typical torque values range from 25 to 35 ft-lbs.
Checking the Oil Level
Replace the oil filler cap and start the engine. Let it run for a few minutes, then turn it off and wait a few minutes for the oil to settle. Use the dipstick to check the oil level. The oil level should be between the “Min” and “Max” marks on the dipstick. If the oil level is low, add more oil in small increments until it reaches the desired level.
Resetting the Oil Life Indicator
Most Kia Seltos models have an oil life indicator that tracks the remaining life of the oil. After changing the oil, you need to reset the indicator. To do this, follow these steps:
- Insert the key into the ignition and turn it to the “ON” position.
- Press and hold the odometer reset button.
- Turn the key to the “ACC” position and release the reset button.
- The oil life indicator will reset to 100%.
Adding New Engine Oil
Once the old oil has been drained, it’s time to add new engine oil. Refer to your vehicle’s owner’s manual for the recommended type and amount of oil required. Typically, a 2022 Kia Seltos will require around 4.5 quarts of 0W-20 full synthetic oil.
Here’s a step-by-step guide on how to add new engine oil:
1. Remove the oil drain plug and allow all of the old oil to drain out.
2. Replace the oil drain plug and tighten it securely.
3. Locate the oil filler cap on the top of the engine. It’s usually marked with an oil can symbol.
4. Remove the oil filler cap and insert the funnel.
5. Add new engine oil to the engine through the funnel. Add the amount of oil specified in your owner’s manual.
6. Replace the oil filler cap and tighten it securely.
7. Check the oil level using the dipstick. The oil level should be between the “Full” and “Add” marks on the dipstick.
| If the oil level is low, add more oil until it reaches the “Full” mark. |
| If the oil level is too high, drain some oil until it reaches the “Add” mark. |
Once you’ve added new oil and checked the oil level, you’ve successfully changed the oil on your 2022 Kia Seltos.
Resetting the Oil Life Indicator
Once you have changed the oil on your Kia 2022 Selto, you need to reset the oil life indicator. This will let you know when it is time to change the oil again. Typically, an oil change is needed every 7,500 miles. To reset the oil life indicator, follow these steps:
- Turn the ignition key to the “ON” position, but do not start the engine.
- Press and hold the “Trip” button on the instrument cluster.
- While holding the “Trip” button, turn the ignition key to the “OFF” position and then back to the “ON” position.
- Continue to hold the “Trip” button for about 10 seconds.
- The oil life indicator will flash and then reset to 100%.
- Release the “Trip” button.
- Start the engine and verify that the oil life indicator has been reset.
| Steps | Action |
|---|---|
| 1 | Turn the ignition to the On position. |
| 2 | Hold down the trip button that is on the instrument cluster. |
| 3 | Turn the ignition switch to the position Off and then On while holding the trip button. |
| 4 | Hold the trip button down for around 10 seconds. |
| 5 | The oil life light should then start to flash. |
| 6 | The oil life indicator will reset to 100%. |
| 7 | You may release the trip button. |
| 8 | Start the engine and review the status of your oil life indicator. If it has been properly reset it should read 100%. |
Proper Disposal of Old Oil and Filter
Properly disposing of your old oil and filter is crucial to protect the environment. Here’s how to do it responsibly:
1. Find a Recycling Center
Look for authorized recycling centers in your area that accept used oil and filters. These facilities have special equipment to safely dispose of these materials.
2. Use a Collection Service
Some companies offer door-to-door collection services for used oil and filters. Check with your local waste management service or auto parts stores for details.
3. Recycle at Auto Parts Stores
Many auto parts stores offer recycling programs for used oil and filters. Drop off your used materials at these locations for proper disposal.
4. Check Local Regulations
Some municipalities have specific regulations for disposing of used oil and filters. Check with your local authorities for guidelines.
5. Transport Safely
When transporting used oil, make sure it’s securely sealed in a leak-proof container. Keep it upright to prevent spills.
6. Store Oil Safely
If you can’t dispose of your used oil immediately, store it temporarily in a safe place away from heat and sunlight.
7. Recycle Filter
Oil filters contain metal and paper elements that can be recycled. Check with your local recycling center or auto parts store for filter recycling programs.
8. Clean Up Spills
If you spill any oil or filter fluid, clean it up promptly with absorbent materials, such as rags or cat litter. Dispose of the used materials appropriately.
9. Benefits of Proper Disposal
Proper disposal of used oil and filters protects the environment in several ways:
- Prevents contamination of soil and waterways
- Reduces pollution of air and water
- Conserves natural resources, as used oil can be recycled into new products
Maintenance Tips for Optimal Engine Performance
Background Information
The 2022 Kia Seltos is a subcompact SUV that offers a balance of comfort, efficiency, and performance. Regular maintenance, including oil changes, is crucial for keeping your Seltos running at its best.
Materials Required
Gather the following materials before starting the oil change:
- New synthetic oil (5W-20 or 5W-30, as recommended by Kia)
- New oil filter
- Drain pan
- 24mm socket wrench
- Funnel
- Gloves
Safety Precautions
Before proceeding, ensure your Seltos is parked on a level surface, the engine is off, and the parking brake is engaged for safety.
Step-by-Step Guide
1. Locate the Oil Pan and Drain Plug
Place the drain pan under the oil pan. Locate the 17mm drain plug at the bottom of the oil pan.
2. Remove the Drain Plug
Using the socket wrench, carefully remove the drain plug. Be cautious as hot oil will begin to drain out.
3. Allow the Oil to Drain
Allow the oil to drain completely into the drain pan. This may take several minutes.
4. Replace the Drain Plug
Once the oil has drained, clean the drain plug and tighten it back into the oil pan using the socket wrench.
5. Remove the Oil Filter
Locate the oil filter near the engine. Use a wrench to loosen and remove the oil filter.
6. Apply Oil to the New Oil Filter
Apply a thin layer of new oil to the rubber gasket of the new oil filter.
7. Install the New Oil Filter
Screw the new oil filter onto the engine by hand until it’s finger-tight. Then, use the wrench to tighten it an additional 3/4 of a turn.
8. Add New Oil
Using the funnel, pour the recommended amount of new oil into the engine. Refer to your owner’s manual for the specific oil capacity.
9. Check the Oil Level
Use the dipstick to check the oil level. Ensure it’s between the “min” and “max” marks on the dipstick.
10. Reset the Oil Life Monitor
Start the engine and let it idle for a few minutes. Press and hold the “Trip” button on the instrument panel until the oil life monitor resets to 0% or 100%. This may vary depending on the trim level of your Seltos.
How To Change Oil On Kia 2022 Selto
Changing the oil on your Kia 2022 Selto is a relatively simple process that can be completed in about 30 minutes. By following these steps, you can save yourself the cost of having your oil changed by a mechanic.
- Park your Kia 2022 Selto on a level surface and engage the parking brake.
- Locate the oil drain plug at the bottom of the oil pan. The oil drain plug is usually a 17mm bolt.
- Place an oil drain pan under the oil drain plug.
- Use a wrench to loosen the oil drain plug.
- Allow the oil to drain into the oil drain pan.
- Once the oil has drained, replace the oil drain plug.
- Locate the oil filter. The oil filter is usually located near the top of the engine.
- Use an oil filter wrench to remove the oil filter.
- Apply a thin layer of new oil to the gasket of the new oil filter.
- Screw the new oil filter onto the engine.
- Add new oil to the engine. The amount of oil required will vary depending on the engine size. Check the owner’s manual for the correct amount of oil.
- Check the oil level using the dipstick. The oil level should be between the “add” and “full” marks on the dipstick.
- Start the engine and let it run for a few minutes.
- Check for any leaks.
People Also Ask
How often should I change the oil on my Kia 2022 Selto?
Kia recommends changing the oil on your 2022 Selto every 5,000 miles or 6 months, whichever comes first.
What type of oil should I use in my Kia 2022 Selto?
Kia recommends using 0W-20 full synthetic oil in your 2022 Selto.
How much oil does my Kia 2022 Selto take?
The 2022 Kia Selto takes 4.8 quarts of oil.
Can I change the oil on my Kia 2022 Selto myself?
Yes, you can change the oil on your Kia 2022 Selto yourself. The process is relatively simple and can be completed in about 30 minutes.
