The Pez candy dispenser is a classic candy treat that has been enjoyed by people of all ages for decades. This iconic candy dispenser is shaped like a fun character and dispenses delicious candy with a simple push of a button. If you’ve ever wondered how to use a Pez candy dispenser, here are a few simple steps to get you started.
First, hold the Pez dispenser upright with the character facing you. Next, locate the small, round button on the back of the dispenser. Press the button firmly with your thumb or finger, and the head of the character will pop up, revealing a stack of candy. Gently tilt the dispenser towards your mouth and shake it slightly to dispense a candy into your mouth. Enjoy the sweet and delicious Pez candy!
Pez candy dispensers are reusable, so you can enjoy your favorite candy over and over again. To refill the dispenser, simply remove the character head and fill the dispenser with your favorite Pez candy. Be sure to press the button a few times to make sure the candy is properly dispensed. With a little care, your Pez candy dispenser will provide you with years of enjoyment.
Loading Candy into the Pez Dispenser
Loading candy into a Pez dispenser is a simple process that can be completed in a few easy steps:
- Gather your materials. You will need a Pez dispenser, a roll of Pez candy, and possibly a small screwdriver or other pointed object.
- Open the dispenser. To do this, locate the small latch on the back of the dispenser and push it to the side. The top of the dispenser will then pop open.
- Insert the candy roll. Take the roll of Pez candy and insert it into the dispenser, with the candy pieces facing down. Make sure that the candy is inserted all the way to the bottom of the dispenser.
- Close the dispenser. Once the candy is inserted, close the top of the dispenser by pushing it down until it clicks into place.
- Dispense the candy. To dispense a piece of candy, simply press down on the top of the dispenser. The candy will be dispensed from the bottom of the dispenser.
Twisting the Head to Dispense Candy
The Pez candy dispenser is a classic that has been around for decades. It is made of plastic and has a rectangular body with a head that can be twisted to dispense candy. The head is attached to the body by a thin plastic neck. When the head is twisted, a small metal spring inside the neck is released, which pushes a piece of candy out of the dispenser’s mouth.
Loading the Pez Dispenser
To load the Pez dispenser, first remove the head by twisting it counterclockwise. Then, fill the body of the dispenser with Pez candy. Each dispenser holds 12 pieces of candy. Once the dispenser is loaded, replace the head by twisting it clockwise until it is securely attached.
Dispensing Candy
To dispense candy, simply twist the head of the Pez dispenser clockwise. As the head is twisted, the spring inside the neck is released, which pushes a piece of candy out of the dispenser’s mouth. The candy will fall into your hand or onto a surface below the dispenser.
| Step | Instruction |
|---|---|
| 1 | Remove the head by twisting it counterclockwise. |
| 2 | Fill the body of the dispenser with Pez candy. |
| 3 | Replace the head by twisting it clockwise until it is securely attached. |
| 4 | To dispense candy, simply twist the head of the Pez dispenser clockwise. |
Removing the Pez Head
The Pez head is the most iconic part of the Pez dispenser, but it can also be the most frustrating to remove. If you’re not careful, you can easily break the head or damage the dispenser. Here’s a step-by-step guide on how to remove the Pez head safely and easily:
1. Twist the head counterclockwise
Place your thumb on the back of the Pez head and your index finger on the front. Gently twist the head counterclockwise. Do not use too much force, or you could break the head.
2. Pull the head straight up
Once the head is loose, pull it straight up. Do not pull it at an angle, or you could damage the dispenser.
3. Remove the candy
Once the head is removed, you can remove the candy from the dispenser. Here’s a detailed guide on how to do it:
| Step | Instructions |
|---|---|
| 1 | Press down on the top of the dispenser to release the candy. |
| 2 | Gently shake the dispenser to remove all of the candy. |
| 3 | If there is any candy left in the dispenser, you can use a toothpick or other small object to remove it. |
Once the candy is removed, you can reattach the head to the dispenser. To do this, simply align the head with the hole in the dispenser and press down until it clicks into place.
Inserting the Candy Sticks
To insert the candy sticks into your Pez dispenser, follow these steps:
- Open the dispenser: Push down on the head of the dispenser to open it.
- Insert the sticks: Take a handful of candy sticks and insert them into the dispenser’s chamber. Make sure that the sticks are facing the correct way, with the flat side facing outwards.
- Pack the sticks tightly: Use the back of a spoon or your finger to pack the candy sticks as tightly as possible. This will help prevent them from falling out when you dispense them.
- Close the dispenser: Push the head of the dispenser back down to close it. Make sure that it is closed securely so that the candy sticks do not fall out.
Here is a table summarizing the steps for inserting the candy sticks:
| Step | Description |
|---|---|
| 1 | Open the dispenser. |
| 2 | Insert the candy sticks. |
| 3 | Pack the sticks tightly. |
| 4 | Close the dispenser. |
Attaching the Pez Head
To attach the Pez head, follow these steps:
- Locate the small, circular opening on the top of the Pez dispenser.
- Align the stem of the Pez head with the opening.
- Push the head down onto the stem until it clicks into place.
- Gently turn the head to the desired position.
- To remove the head, gently pull it straight up while holding the dispenser steady. It may require a little force to detach it.
| 1. Locate the opening | 2. Align the stem |
|---|---|
 |
 |
| 3. Push down | 4. Rotate |
 |
 |
Note: It is important to clean the head and stem before attaching to prevent dirt or debris from entering the dispenser.
Tips for Maintaining the Pez Dispenser
To ensure the longevity and optimal performance of your Pez dispenser, follow these simple maintenance guidelines:
1. Cleaning the Dispenser Regularly
Use a damp cloth to wipe down the dispenser, removing any dirt or residue. Rinse the cloth with warm water and dry the dispenser thoroughly.
2. Lubricating the Mechanism
Apply a small amount of food-grade lubricant, such as petroleum jelly or vegetable oil, to the moving parts of the dispenser. This will reduce friction and ensure smooth operation.
3. Inspecting for Damage
Periodically examine the dispenser for any cracks, chips, or loose parts. If any damage is found, discontinue use and seek professional repair.
4. Storing the Dispenser Properly
Store the dispenser in a cool, dry place away from direct sunlight. Heat and moisture can damage the dispenser’s plastic components.
5. Avoiding Overloading
Do not overfill the dispenser with candy. Excess pressure can strain the mechanism and lead to malfunction.
6. Troubleshooting Common Issues
If you encounter any issues with your Pez dispenser, refer to the following table for troubleshooting tips:
| Issue | Solution |
|---|---|
| Candy not dispensing | Check if the candy is jammed or the mechanism is stuck. Try lubricating or cleaning the dispenser. |
| Candy breaking | Lubricate the mechanism and ensure the candy is not too hard. If the problem persists, contact the manufacturer. |
| Dispenser squeaking | Apply lubricant to the moving parts and clean the dispenser thoroughly. If the problem persists, contact the manufacturer. |
Troubleshooting Common Issues
No Candy Comes Out
If no candy comes out when you press the button, try the following:
- Make sure the dispenser is filled with candy.
- Check if the candy is jammed. Gently pull the handle down and push it back up again.
- Remove the candy from the dispenser and insert it again, making sure it’s aligned correctly.
- If none of these solutions work, the dispenser may be broken and need to be replaced.
Candy Gets Stuck
If the candy gets stuck when you press the button, try the following:
- Gently shake the dispenser to dislodge the candy.
- Pull the handle down and push it back up again several times.
- Use a toothpick or something similar to gently push the candy out.
- If none of these solutions work, remove the candy from the dispenser and try reinserting it.
Candy Falls Out When Not Pressed
If candy falls out of the dispenser when it’s not being pressed, try the following:
- Make sure the candy is inserted correctly, with the flat side facing up.
- Check if the dispenser has any cracks or damage that could be causing the candy to fall out.
- If none of these solutions work, the dispenser may be broken and need to be replaced.
Button Feels Loose or Stuck
If the button feels loose or stuck, try the following:
- Check if the button is properly attached to the dispenser.
- If the button is loose, gently push it back into place until it clicks.
- If the button is stuck, try gently pulling it out and then pushing it back in.
- If none of these solutions work, the dispenser may be broken and need to be replaced.
Candy Dispense Too Fast / Too Slow
| Issue | Solution |
|---|---|
| Candy dispense too fast | Press button gently and release quickly |
| Candy dispense too slow | Press button firmly and hold it down |
Candy Has Strange的味道 or Color
If the candy has a strange taste or color, it’s possible that the dispenser has been contaminated.
- Wash the dispenser thoroughly with soap and water.
- If the candy still has a strange taste or color, discard it and get a new dispenser.
Using the Pez Dispenser Creatively
8. Artistic Ornaments:
Pez dispensers can be transformed into unique and whimsical ornaments. By painting them with vibrant colors, adding decorative elements, and attaching ribbons, you can create charming pieces for Christmas trees, Easter baskets, or any other occasion. The following table provides ideas and materials for creating Pez ornaments:
| Materials | Ideas |
|---|---|
| Acrylic paints | Paint dispensers in festive colors or create abstract designs. |
| Glitter, sequins | Add sparkle and shine by gluing or sprinkling decorative elements onto the dispensers. |
| Ribbons, twine | Attach ribbons or twine to create a loop so that the dispensers can be hung as ornaments. |
| Fabric scraps | Wrap the dispensers in fabric and glue or sew the edges to create a cozy and textured look. |
| Beads, buttons | Add embellishments such as beads or buttons to give the dispensers a personal touch. |
Storing and Preserving Pez
Storing Pez
To keep your Pez dispensers in good condition, store them in a cool, dry place away from direct sunlight. Avoid storing them in extreme temperatures, as this can cause the plastic to warp or discolor. If you plan to store your dispensers for an extended period, consider placing them in a sealed container to protect them from dust and moisture.
Preserving Pez Candy
Pez candy has a relatively long shelf life when stored properly. Here are some tips to preserve the freshness and flavor of your Pez:
Keep It Airtight
Store Pez candy in airtight containers to prevent it from drying out or absorbing moisture. Plastic bags, resealable jars, or airtight candy dishes are all suitable options.
Avoid Heat and Sunlight
Heat and sunlight can degrade both the candy and the dispenser. Keep Pez away from direct sunlight and heaters or other heat sources.
Control Humidity
Excess humidity can cause Pez candy to become sticky or clump together. Store it in a dry place, such as a cupboard or pantry.
Check Expiration Dates
Like any food product, Pez candy has an expiration date. Check the packaging for the expiration date and discard the candy after that date has passed.
Additional Tips
| Tip | Details |
|---|---|
| Freeze Pez | Freezing Pez candy can extend its shelf life. Freeze it in airtight containers for up to 6 months. |
| Reseal Dispensers | If you remove the candy from Pez dispensers, reseal them with tape or a plastic bag to prevent them from losing their shape. |
| Inspect Regularly | Periodically inspect your Pez candy and dispensers for any signs of damage, mold, or discoloration. Discard any compromised items. |
Fun Facts About the Pez Collector’s World
The Pez collecting community is a vibrant and diverse one, with enthusiasts from all walks of life. Here are some fun facts about the Pez collector’s world:
1. The first Pez dispensers were made of tin and were shaped like cameras, lighters, and other everyday objects.
2. The first Pez candies were made with real fruit juice and were available in four flavors: cherry, lemon, orange, and raspberry.
3. The first Pez dispenser with a character head was introduced in 1955 and featured Mickey Mouse.
4. The most popular Pez dispenser of all time is the Santa Claus dispenser, which was first introduced in 1957.
5. There are over 3,000 different Pez dispensers in the world, with new ones being introduced every year.
6. The most valuable Pez dispenser is the “PEZ the Robot,” which was released in Japan in 1975 and is worth over $10,000.
7. There are numerous Pez collecting clubs and organizations around the world, including the National Pez Collectors Association.
8. Pez dispensers have been featured in numerous movies, TV shows, and other pop culture references.
9. Pez candies are still made with real fruit juice and are available in a wide variety of flavors.
10. Pez dispensers are not only collectible, but they are also functional. They can be used to dispense candy, or they can be used as decorative pieces and table decor.
**Table of Pez Candy Dispenser Sales by Decade**
| Decade | Sales (in millions) |
|---|---|
| 1950s | 100 |
| 1960s | 500 |
| 1970s | 1,000 |
| 1980s | 2,000 |
| 1990s | 3,000 |
| 2000s | 4,000 |
| 2010s | 5,000 |
How to Use a Pez Candy Dispenser
Pez candy dispensers are a classic childhood treat. They are easy to use and can be enjoyed by people of all ages. Here are the steps on how to use a Pez candy dispenser:
- Hold the dispenser upright. The dispenser should be held in an upright position so that the candy can easily flow out.
- Press the button on the front of the dispenser. This will release a piece of candy from the dispenser.
- Enjoy your candy! The candy can be eaten as is, or it can be added to other desserts, such as ice cream or yogurt.
People Also Ask About How to Use Pez Candy Dispenser
How do I load a Pez candy dispenser?
To load a Pez candy dispenser, simply remove the top of the dispenser and pour the candy into the dispenser. The candy should be packed tightly so that it does not fall out when the dispenser is used.
How do I clean a Pez candy dispenser?
To clean a Pez candy dispenser, simply remove the top of the dispenser and wash it with warm, soapy water. The dispenser can also be placed in the dishwasher on the top rack.
