Protected mode is a diagnostic mode of Home windows that begins your pc with a minimal set of drivers and applications. This may be useful for troubleshooting issues together with your pc, corresponding to malware infections or driver conflicts. Booting into secure mode may also be useful if it’s worthwhile to make adjustments to your pc’s settings that may usually be prevented by malware or different software program.
In addition into secure mode on an HP Elitebook, you will want to press the F11 key repeatedly throughout the boot course of. This may open the Boot Menu, the place you possibly can choose the Protected Mode possibility. Upon getting chosen Protected Mode, press the Enter key besides into secure mode.
You too can boot into secure mode utilizing the System Configuration utility. To do that, press the Home windows key + R to open the Run dialog field. Then, kind msconfig into the Run dialog field and press the Enter key. This may open the System Configuration utility. Within the System Configuration utility, click on on the Boot tab after which choose the Protected Boot possibility. Lastly, click on on the Apply button after which the OK button to avoid wasting your adjustments and reboot your pc into secure mode.
As soon as you’re in secure mode, you possibly can troubleshoot the issues together with your pc. You too can make adjustments to your pc’s settings that may usually be prevented by malware or different software program. If you find yourself completed troubleshooting or making adjustments to your pc, you possibly can reboot your pc to exit secure mode.
Protected Mode Overview
What’s Protected Mode?
Protected mode is a diagnostic mode that begins Home windows with a minimal set of drivers and applications. This mode means that you can troubleshoot and resolve points which may be attributable to conflicts between software program, drivers, or {hardware}. Protected mode might be significantly helpful when your pc is experiencing issues corresponding to blue screens, system freezes, or different surprising conduct.
Advantages of Utilizing Protected Mode
There are a number of advantages to utilizing secure mode for troubleshooting:
- It disables non-essential drivers and applications, making it simpler to establish the supply of issues.
- It means that you can make adjustments to your system, corresponding to updating drivers or eradicating software program, with out the interference of different applications.
- It could assist you to restore your pc to a secure state, even when it isn’t capable of boot usually.
When to Use Protected Mode
Protected mode is beneficial within the following conditions:
- When your pc is experiencing blue screens or different system errors.
- Whenever you suspect a driver or software program battle is inflicting issues.
- When it’s worthwhile to make adjustments to your system however different applications are interfering.
- Whenever you wish to restore your pc to a secure state.
Accessing Protected Mode by way of System Configuration
To entry the System Configuration utility, also referred to as msconfig, observe these steps:
1. Concurrently press the Home windows key and the R key to open the Run dialog field.
2. Kind “msconfig” with out the quotes into the textual content subject.
3. Click on the OK button or press the Enter key to launch System Configuration.
As soon as within the System Configuration utility, besides into Protected Mode with minimal drivers and companies, observe these steps:
| Step | Motion |
|---|---|
| 1. | Navigate to the Boot tab throughout the System Configuration utility. |
| 2. | Search for the Protected boot possibility and verify the field subsequent to it. |
| 3. | Optionally, you possibly can select to allow networking in Protected Mode by checking the field for Community. |
| 4. | Be sure that the Timeout worth is ready to 30 seconds or much less. This gives you a small time window to vary the boot choices earlier than they’re utilized. |
| 5. | Click on on the Apply button to avoid wasting the adjustments. |
| 6. | Click on on the OK button to shut the System Configuration utility. |
Your pc will likely be prompted to restart instantly. After restarting, your pc will boot into Protected Mode with the chosen choices.
Troubleshooting Drivers in Protected Mode
In Protected Mode, solely the important drivers and applications are loaded, making it ideally suited for troubleshooting driver points.
1. Begin your HP EliteBook in Protected Mode by following the steps within the earlier part.
2. As soon as in Protected Mode, open Machine Supervisor by urgent Home windows Key + X and deciding on Machine Supervisor.
3. Develop the classes in Machine Supervisor to establish any drivers with exclamation marks or error messages.
4. To troubleshoot these drivers:
a) Proper-click on the problematic driver and choose “Properties.”
b) Within the Properties window, navigate to the “Driver” tab.
c) Click on on the “Replace Driver” button to routinely seek for and set up the newest driver software program.
d) If an replace will not be accessible, click on on the “Roll Again Driver” button to revert to the earlier model of the driving force.
e) If neither of those choices resolves the difficulty, click on on the “Uninstall Machine” button to take away the driving force out of your system. You could have to restart your pc after uninstalling the driving force.
5. Upon getting addressed the problematic drivers, restart your HP EliteBook in regular mode to see if the difficulty is resolved.
Disabling Startup Applications in Protected Mode
Figuring out and disabling startup applications can forestall them from operating whenever you enter Protected Mode. This is a step-by-step information:
1. Open Activity Supervisor
Press “Ctrl + Shift + Esc” to launch Activity Supervisor.
2. Navigate to the Startup Tab
Click on on the “Startup” tab on the high of Activity Supervisor.
3. Type Applications by Standing
Click on on the “Standing” column header to kind applications by their startup standing.
4. Establish Non-Important Applications
Study the record of applications and establish these that aren’t important to your system. These might embrace bloatware or applications that you just not often use.
5. Disable Non-Important Applications
Proper-click on the non-essential applications and choose “Disable” from the context menu. You too can use the slider button subsequent to this system identify to toggle it off.
| Program Identify | Standing | Motion |
|---|---|---|
| Instance Software program #1 | Enabled | Disable |
| Instance Software program #2 | Disabled | – |
| Instance Software program #3 | Enabled | Disable |
6. Exit Activity Supervisor
Upon getting disabled all non-essential applications, shut Activity Supervisor.
Accessing Protected Mode
In addition into Protected Mode on an HP EliteBook, observe these steps:
- Activate or restart your pc.
- Instantly begin urgent the F11 key repeatedly till the Boot Choices menu seems.
- Choose the “Troubleshoot” possibility.
- Choose “Superior choices.”
- Navigate to “Startup Settings.”
- Click on “Restart.”
- After the restart, you will note a number of boot choices on the display.
- Choose the choice for “Protected Mode” by urgent the corresponding quantity key or perform key.
Working System Restore in Protected Mode
When you’re in Protected Mode, you possibly can proceed with operating a System Restore:
- Open the Begin menu and seek for “System Restore.”
- Choose “Create a restore level” and click on on the “System Restore” button.
- Within the System Restore window, choose the restore level that you just wish to return your system to.
- Click on on the “Scan for affected applications” button to see what applications and information will likely be affected by the restore.
- Click on on the “Subsequent” button after which “End” to start out the System Restore course of.
Further Notes
In case you are unable besides into Protected Mode utilizing the F11 key, you might want to make use of a distinct technique, corresponding to utilizing the Home windows Restoration Surroundings (WinRE) or a bootable USB drive.
Scanning for Malware in Protected Mode
In Protected Mode, your pc will solely load probably the most important drivers and software program, which may help to isolate and take away malware infections. To scan for malware in Protected Mode, observe these steps:
1. Begin your pc in Protected Mode
Restart your pc and press the F8 key repeatedly throughout the startup course of. This may open the Superior Boot Choices menu. Use the arrow keys to pick out “Protected Mode with Networking” and press Enter.
2. Replace your antivirus software program
As soon as you’re in Protected Mode, open your antivirus software program and replace it to the newest model. This may be certain that your software program has probably the most up-to-date definitions for malware detection.
3. Run a full system scan
Click on the “Scan” button in your antivirus software program to start out a full system scan. This scan will verify the entire information and directories in your pc for malware.
4. Delete any contaminated information
As soon as the scan is full, your antivirus software program will show an inventory of any contaminated information that it has discovered. Click on the “Delete” button to take away these information out of your pc.
5. Restart your pc
Upon getting deleted the entire contaminated information, restart your pc in regular mode. Your pc ought to now be freed from malware.
6. Reinstall your antivirus software program
If you happen to have been unable to take away the malware an infection utilizing Protected Mode, you might have to reinstall your antivirus software program. This may guarantee that you’ve a clear set up of your antivirus software program and that it’s correctly configured to guard your pc.
7. Contact a pc technician
In case you are nonetheless having bother eradicating the malware an infection, you must contact a pc technician. A technician may help you to establish and take away the an infection and restore your pc to regular performance.
Resetting Home windows Password in Protected Mode
Accessing Protected Mode
- Energy off your HP Elitebook.
- Energy it again on by urgent the ability button.
- Instantly begin urgent the F11 key repeatedly till the Boot Menu seems.
- Choose “Troubleshoot” and press Enter.
- Select “Superior Choices” and press Enter.
- Choose “Startup Settings” and press Enter.
- Click on the “Restart” button.
- After the pc restarts, an inventory of startup choices will likely be displayed.
Resetting the Password
- Choose the “Protected Mode” possibility by urgent the F4 key.
- Look forward to the system besides into Protected Mode.
- Click on on the “Begin” button.
- Kind “cmd” within the search field and press Enter.
- Within the command immediate window, kind the next command: web person
- Exchange “
” together with your username. - Exchange “
” together with your desired new password. - Press Enter.
Your password will now be reset. Now you can restart your pc and log in together with your new password.
Resolving Boot Issues with Protected Mode
1. Restart the Pc
Maintain down the ability button till the pc turns off. Then, press the ability button once more to restart the pc.
2. Press the F8 Key
As quickly as the pc begins besides, repeatedly press the F8 key. This may open the Superior Boot Choices menu.
3. Choose Protected Mode
Use the arrow keys to pick out “Protected Mode” from the menu. Then, press Enter.
4. Enter Credentials
If prompted, enter your person identify and password.
5. Troubleshoot the Downside
Protected Mode begins Home windows with a restricted set of drivers and applications. This may help you establish and troubleshoot boot issues.
6. Exit Protected Mode
To exit Protected Mode, merely restart the pc. The pc will boot usually.
7. Troubleshoot Boot Issues
In case you are having bother booting into Protected Mode, attempt the next steps:
- Ensure that the keyboard is working correctly.
- Strive utilizing a distinct keyboard.
- Strive booting from a distinct laborious drive or USB drive.
- Contact HP help for help.
8. Further Data
Protected Mode is a diagnostic mode that may assist you to troubleshoot boot issues. Protected Mode begins Home windows with a restricted set of drivers and applications. This may help you establish and troubleshoot boot issues.
9. Troubleshooting Ideas
Listed below are some further suggestions for troubleshooting boot issues:
Downside Resolution The pc doesn’t boot in any respect Verify the ability provide and be sure that the pc is correctly plugged in. The pc boots to a black display Strive restarting the pc. If the issue persists, attempt booting into Protected Mode. The pc boots to a blue display The blue display error message comprises info that may assist you to establish the issue. How one can Boot Into Protected Mode
Protected mode is a diagnostic mode of Home windows that begins with solely important information and drivers, permitting you to troubleshoot issues with out interference from third-party software program.
In addition into secure mode on an HP EliteBook:
-
Flip off your pc.
-
Flip in your pc and instantly begin urgent the “F11” key repeatedly till the HP Startup Menu seems.
-
Use the arrow keys to pick out “Troubleshoot” and press “Enter.”
-
Choose “Superior choices” and press “Enter.”
-
Choose “Startup Settings” and press “Enter.”
-
Click on the “Restart” button.
-
Your pc will restart and you will note an inventory of startup choices.
-
Press “4” or “F4” to pick out “Protected Mode.”
-
Your pc will boot into secure mode.
-
Troubleshooting in Protected Mode:
a.
Begin by attempting to run this system or software that was inflicting issues.
b.
If the issue nonetheless happens, disable any not too long ago put in software program or drivers.
c.
Scan your pc for malware or viruses.
d.
If the issue persists, attempt updating your drivers or utilizing System Restore to revert your system to a earlier state.
Exiting Protected Mode
To exit secure mode, merely restart your pc usually. Your pc will boot into common mode by default.
How one can Boot HP EliteBook into Protected Mode
In case you are experiencing issues together with your HP EliteBook, booting into secure mode may help troubleshoot and resolve the problems. Protected mode begins your pc with solely the essential drivers and companies, which may help establish and repair points which may be attributable to third-party software program or drivers.
In addition an HP EliteBook into secure mode:
1. Activate or restart your pc.
2. As quickly because the HP emblem seems, press and maintain the F8 key repeatedly till the Startup Menu opens.
3. Use the arrow keys to pick out Protected Mode and press Enter.
4. Home windows will now boot into Protected Mode.Troubleshooting Frequent Points
My pc will not boot into Protected Mode
In case your pc will not boot into Protected Mode, attempt the next:
* Be sure you are urgent the F8 key repeatedly as quickly because the HP emblem seems.
* Strive utilizing a distinct keyboard.
* Reset the BIOS to default settings.I am having issues in Protected Mode
In case you are experiencing issues whereas in Protected Mode, attempt the next:
* Replace your drivers.
* Scan for malware.
* Carry out a system restore.Folks Additionally Ask
How do I restart my HP EliteBook in Protected Mode?
To restart your HP EliteBook in Protected Mode, observe the steps outlined above. As soon as you’re in Protected Mode, click on the Begin button and choose Restart. Your pc will restart and proceed operating in Protected Mode.
How do I exit Protected Mode on my HP EliteBook?
To exit Protected Mode in your HP EliteBook, merely restart your pc. Your pc will routinely boot into regular mode after the restart.
- Exchange “
