If you’re like most drivers, you probably don’t think much about your parking brake. However, it’s an important safety feature that can help prevent your car from rolling away when it’s parked. In the event of an emergency, it can also be used to stop your car if your regular brakes fail. The parking brake is usually located between the driver’s seat and the center console. To engage the parking brake, simply pull up on the lever until it clicks into place. To release the parking brake, push down on the lever and then pull it back towards you.
However, there may be times when you need to turn off the parking brake without using the lever. For example, if you’re stuck in a snowdrift or if your car is being towed. In these cases, you can use the following steps to turn off the parking brake manually. First, locate the parking brake actuator. This is usually a small, black box located on the underside of the car, near the rear wheels. Once you’ve found the actuator, use a wrench to loosen the nut that holds it in place. Once the nut is loose, you can pull the actuator out of the way and disengage the parking brake. Be sure to tighten the nut back in place once you’re finished.
Turning off the parking brake manually can be a tricky procedure, so it’s important to follow the steps carefully. If you’re not comfortable doing it yourself, you can always take your car to a mechanic and have them do it for you. However, if you’re ever in a situation where you need to turn off the parking brake manually, knowing how to do it can be a valuable skill.
Engage the Parking Brake
Engaging the parking brake in the Subaru Outback 2015 is a simple yet crucial step for ensuring the vehicle remains stationary when parked. Follow these steps to activate the parking brake:
- Locate the parking brake lever: It is typically situated on the center console, between the front seats.
- Depress the brake pedal: This is a safety precaution to prevent the vehicle from moving unintentionally.
- Pull up the parking brake lever: Lift it firmly until you feel a slight resistance. The lever will stay upright, indicating that the parking brake is engaged.
- Release the brake pedal: Once the parking brake is engaged, you can release the regular brake pedal.
Additional Tips:
- Always engage the parking brake when parking the vehicle, even on a level surface.
- Ensure the parking brake is fully engaged by pulling up on the lever with moderate force.
- Check the parking brake indicator light on the instrument panel to confirm that the brake is activated.
| Step | Action |
|---|---|
| 1 | Locate parking brake lever on center console |
| 2 | Depress brake pedal |
| 3 | Pull up parking brake lever until resistance is felt |
| 4 | Release brake pedal |
Locate the Parking Brake Release Button
The parking brake release button for the 2015 Subaru Outback is located on the center console, to the left of the gearshift lever. It is a black button with an image of a car with the rear wheels locked. The button is illuminated when the parking brake is engaged.
To release the parking brake:
1. Make sure the vehicle is in park.
2. Depress the brake pedal with your left foot.
3. Press the parking brake release button with your right hand.
4. The parking brake will release and the brake pedal will return to its normal position.
Additional Notes
If you are unable to release the parking brake, it may be because the brake pads are frozen to the rotors. To resolve this issue, you can try driving the vehicle forward or backward for a short distance. This should break the ice and allow you to release the parking brake.
If you are still unable to release the parking brake, you should consult with a qualified mechanic.
Press and Hold the Parking Brake Release Button
To disengage the parking brake in your 2015 Subaru Outback, follow these steps:
| Step | Action |
|---|---|
| 1 | Ensure that the vehicle is parked on a flat, stable surface. |
| 2 | Depress the brake pedal with your right foot. |
| 3 | Locate the parking brake release button on the center console, to the left of the transmission shifter. Press and hold the button for a few seconds. |
| 4 | You will hear a click as the parking brake disengages. |
| 5 | Release the brake pedal and the parking brake will be fully disengaged. |
Additional Details for Step 3:
The parking brake release button is a small, square-shaped button with a “P” symbol on it. It is located on the center console, to the left of the transmission shifter. To disengage the parking brake, press and hold the button for a few seconds until you hear a click. You may need to apply some pressure to the button, especially if the parking brake has been engaged for a long time.
If the parking brake does not disengage after pressing and holding the release button, try the following:
- Ensure that the brake pedal is fully depressed.
- Try pressing the release button again, applying more pressure this time.
- If the parking brake still does not disengage, contact your Subaru dealer for assistance.
Shift into Drive (D) or Reverse (R)
Once the parking brake is fully disengaged, shift the transmission into Drive (D) or Reverse (R), depending on your desired direction of travel. This action will automatically deactivate the parking brake and allow you to drive the vehicle.
Automatic Transmission
- Press the brake pedal firmly with your right foot.
- Move the gear selector lever to the D (Drive) or R (Reverse) position.
- Slowly release the brake pedal, applying gentle throttle as needed to initiate movement.
- The parking brake will automatically disengage as the vehicle begins to move.
Manual Transmission
- Ensure the vehicle is in neutral by shifting the gear lever to the center position.
- Press the clutch pedal fully down with your left foot.
- Start the engine.
- Shift the gear lever to the desired gear (1st for forward, R for reverse).
- Slowly release the clutch pedal while gently applying throttle to drive forward or backward.
- The parking brake will automatically disengage as the vehicle begins to move.
| Transmission Type | Steps to Shift and Disengage Parking Brake |
|---|---|
| Automatic | – Press brake pedal – Move gear selector to D or R – Release brake pedal and apply throttle |
| Manual | – Shift to neutral – Press clutch pedal – Start engine – Shift to desired gear – Release clutch pedal and apply throttle |
Release the Parking Brake Lever
To release the parking brake, grab the handle located on the center console.
Next, pull the handle upwards towards you until it clicks.
Once you hear the click, the parking brake will be released.
If experiencing difficulty pulling the parking brake lever, try applying slight pressure to the brake pedal while pulling upwards on the lever.
Additionally, check to ensure that the vehicle is in park (P) before attempting to release the parking brake.
Troubleshooting
If encountering issues releasing the parking brake lever, consider the following troubleshooting steps:
- Check the parking brake cable for any damage or obstructions.
- Inspect the parking brake lever itself for any physical damage or loose connections.
- Ensure the vehicle is properly in park (P) before attempting to release the parking brake.
- Try applying slight pressure to the brake pedal while pulling upwards on the parking brake lever.
- If the parking brake remains stuck, seek professional assistance from a qualified mechanic.
Depress the Accelerator Pedal
This method is only available if the vehicle is in park and the parking brake is not engaged.
If you try to press the accelerator pedal with the parking brake engaged, the car will not move.
However, if the parking brake is accidentally engaged while the car is in drive, you can press the accelerator pedal to override the parking brake and move the car.
When to Use This Method
The following table summarizes when it is appropriate and inappropriate to use this method to release the parking brake:
| Appropriate | Inappropriate |
|---|---|
| The vehicle is in park and the parking brake is not engaged. | The parking brake is engaged and the vehicle is in drive. |
| The parking brake is accidentally engaged while the car is in drive. | The parking brake is frozen or otherwise stuck. |
If the parking brake is frozen or otherwise stuck, it is important to have it serviced by a qualified mechanic as soon as possible.
Troubleshooting: Stuck Parking Brake
If the parking brake is stuck, there are a few things you can try:
1. Check the brake fluid level.
If the brake fluid level is low, it can cause the parking brake to not release. Check the brake fluid level and add brake fluid if necessary.
2. Inspect the parking brake cables.
The parking brake cables can become stretched or damaged over time, which can cause the parking brake to not release properly. Inspect the parking brake cables for any damage and replace them if necessary.
3. Lubricate the parking brake mechanism.
The parking brake mechanism can become rusted or dirty over time, which can cause the parking brake to stick. Lubricate the parking brake mechanism with a penetrating lubricant, such as WD-40.
4. Use a jack to raise the rear of the vehicle.
If the previous steps did not work, you can try using a jack to raise the rear of the vehicle. This will take the weight off of the parking brake and may allow it to release.
5. Remove the rear wheels.
If the previous steps did not work, you may need to remove the rear wheels to access the parking brake mechanism. Once the wheels are removed, you can inspect the parking brake mechanism for any damage and repair or replace it as necessary.
6. Release the parking brake manually.
If the parking brake mechanism is damaged, you may be able to release the parking brake manually. To do this, you will need to locate the parking brake cable and disconnect it from the parking brake mechanism. Once the cable is disconnected, you should be able to release the parking brake.
7. Check the parking brake light.
If the parking brake light is illuminated, it may indicate a problem with the parking brake. Check the parking brake light and troubleshoot any issues that may be causing it to illuminate.
8. Consult a mechanic.
If you are unable to release the parking brake yourself, you should consult a mechanic. A mechanic can diagnose the problem and repair the parking brake.
Stuck Parking Brake Warning Signs
| Warning Sign | Possible Cause |
|---|---|
| The parking brake pedal is hard to push or pull. | The parking brake cables may be stretched or damaged. |
| The parking brake pedal does not release when you press the release button. | The parking brake mechanism may be damaged. |
| The parking brake light is illuminated. | There may be a problem with the parking brake. |
How To Turn Off Parking Brake in a Subaru Outback 2015
The Subaru Outback 2015 is an excellent vehicle that comes equipped with many advanced features, including a user-friendly parking brake system. This guide will provide you with step-by-step instructions on how to turn off the parking brake in your Subaru Outback 2015:
Additional Tips for Turning Off Parking Brake
1. Always start the vehicle in park mode.
Before turning off the parking brake, ensure the vehicle is in park mode. This will prevent the vehicle from rolling.
2. Depress the brake pedal firmly.
When depressing the brake pedal, use firm pressure to ensure the parking brake is fully disengaged.
3. Use your right foot to press the release button.
Use your right foot to press the release button at the base of the parking brake pedal. This will help you avoid accidentally pressing the brake pedal.
4. Listen for the click sound.
When the parking brake is disengaged, you will hear a click sound. This sound indicates that the parking brake is turned off.
5. Remove your foot from the brake pedal.
Once you hear the click sound, you can remove your foot from the brake pedal.
6. The parking brake is now turned off.
The parking brake is now turned off, and you can drive your vehicle.
How to Turn Off Parking Brake in a 2015 Subaru Outback
1. Shift into Park
Put your car in park. This will automatically engage the parking brake.
2. Start the Engine
Start the engine. The parking brake light on the dashboard should be illuminated.
3. Press the Parking Brake Pedal
With your foot on the brake pedal, press the parking brake pedal down. The parking brake light should go out.
4. Shift into Drive
Shift the car into drive. The parking brake should now be disengaged.
Troubleshooting:
5. Parking Brake Light Stays On
If the parking brake light stays on after you have disengaged the brake, there may be a problem with the parking brake system. Have the car inspected by a mechanic.
6. Parking Brake Won’t Engage
If the parking brake won’t engage, there may be a problem with the parking brake cable or linkage. Have the car inspected by a mechanic.
7. Parking Brake Won’t Disengage
If the parking brake won’t disengage, there may be a problem with the parking brake pedal or solenoid. Have the car inspected by a mechanic.
8. Parking Brake Makes Noise
If the parking brake makes noise when you engage or disengage it, there may be a problem with the parking brake pads or rotors. Have the car inspected by a mechanic.
9. Parking Brake Feels Loose
If the parking brake feels loose, there may be a problem with the parking brake cable or linkage. Have the car inspected by a mechanic.
10. Additional Tips for Safely Engaging and Disengaging the Parking Brake
The parking brake is an important safety feature. Always make sure that the parking brake is engaged when you park your car. To ensure that the parking brake is fully engaged, apply firm and steady pressure to the parking brake pedal until you feel resistance. When disengaging the parking brake, release the pedal slowly and smoothly to avoid sudden movement of the vehicle. When driving, never leave the parking brake engaged as this can damage the brake system. Familiarize yourself with the location and operation of the parking brake before driving the vehicle.
Conclusion: Safely Engaging and Disengaging the Parking Brake
The parking brake is an essential safety feature that helps to prevent the vehicle from rolling when parked. By following the steps outlined in this guide, you can safely engage and disengage the parking brake in your 2015 Subaru Outback.
How To Turn Off Parking Brake Subaru Outback 2015
To turn off the parking brake on a 2015 Subaru Outback, follow these steps:
- Ensure that the vehicle is in park.
- Depress the brake pedal with your right foot.
- Pull up the parking brake lever with your left hand.
- Release the brake pedal.
- The parking brake will now be disengaged.
People Also Ask About Subaru Outback 2015 How To Turn Off Parking Brake
What is the location of the parking brake on a 2015 Subaru Outback?
The parking brake lever on a 2015 Subaru Outback is located on the center console, between the front seats.
Can I drive with the parking brake on in a 2015 Subaru Outback?
No, you should not drive with the parking brake on in a 2015 Subaru Outback.
Doing so can damage the brakes and tires.
